Cycling Equipment · Public discussion

Wheel rim wear

Started by Liffy99 · · Last activity · 4 posts · 1,647 views

This thread is locked and is currently read-only.

Thread details

What we know about this thread

Original section
Cycling Equipment
Published
31 July 2019
Last activity
21 August 2019
Original author
Liffy99
Posts
4
Discussion status
Public discussion
Total views
1,647
Views / 30 days
0
Topics

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–4 of 4
Posts remain in their original chronological order.

Text size
  1. [ATTACH=full]3629[/ATTACH] How can I tell if I need new rims ?
    My Mavic Open Pros are at least 7 years old and have probably done about the same number of thousands of miles. There is supposed to be a wear indicator marked close to labelled arrows opposite the valve hole but I am not sure what to look for. See picture. The small radial Mark is much the same on both sides of the rim. Not sure if this is just coincidental dirt/scuff or the actual indicator .

    Attached image
  2. Liffy99 said:

    How can I tell if I need new rims ?
    My Mavic Open Pros are at least 7 years old and have probably done about the same number of thousands of miles. There is supposed to be a wear indicator marked close to labelled arrows opposite the valve hole but I am not sure what to look for. See picture. The small radial Mark is much the same on both sides of the rim. Not sure if this is just coincidental dirt/scuff or the actual indicator .


    There should be a tiny hole in the rim, or there might be a groove. When the rim wears down so the hole or groove disappears, then it's time for new rims. Click on the link: Rim Wear

  3. Usually 7,000 miles is nothing for a rim, they should go between 30,000 to 40,000 miles; the only reason you could get as low as 20,000 is if you ride a lot in rain and mud that gets picked up by the rim then the brakes rub that dirt into the rim wearing the rim down faster.

  4. Put a straight edge across the brake track. Measure the concavity. If you can fit a needle between the straight edge and the rim, replace immediately.

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.