This is probably a long shot but i'm desperate. I'm a first year uni student currently undertaking a project looking at mountaon bike brakes, concentrating on Cantilevers, V-brakes and Disc brakes. I can find plenty of information for how the brakes work and which best etc.. but what i really need to know is how these different brakes are made and the materials used. I've searched everywhere and can't find anything. If anyone knows of any sites or where i can get hold of such information, i would be extremely grateful if you could email me at [email hidden]. Please Help!!
Mountain Bikes · Public discussion
mountain bike brakes
This thread is locked and is currently read-only.
Thread navigation
Jump through the discussion
Go to the original post, the replies on this page, or the latest preserved contribution.
Thread details
What we know about this thread
- Original section
- Mountain Bikes
- Published
- 19 May 2002
- Last activity
- 11 December 2002
- Original author
- Guest
- Posts
- 7
- Discussion status
- Public discussion
- Total views
- 7,107
- Views / 30 days
- 0
The navigation and discussion metadata provide context. Posts remain in their original chronological order.
-
-
James - Couldn't find a website but here's what I know:
Cantilevers
- These brakes are normally forged
- The are made from Cast Iron(really, really low end bikes) or Aluminum usually 6061
- Normal rubber pads
V-Brakes- These brakes can either be forged or machined
- Usually made from Aluminum but to reduce flex some people install Titanium Brake stiffeners
- Normal rubber pads
Disc Brakes- The Calipers and other parts can either be forged or machined
- Usually made from Aluminum and the disc from Stainless Steel
- Brake pads similar to those on a car or motorcycle
Hope this helps 😉 - These brakes are normally forged
-
James
You might be able to help me. I have 700c rims on my tandem. It is a mountainbike frame so the rear brake pivots are made for 26" mountainbike rims. I need a V-brake with reach of 59mm (that is form the centre of the pivot to the centre of the nut holding the brake pad.) If you know of a scource in Johannesburg or Pretoria please let me know. Assuming you are form RS of A!!!!!!!
Keep those wheels spinning!!!!!!
Big H
-
[quote author=Psycho426 link=board=14;threadid=773;start=0#7123 date=1021789036]<br />[<br />V-Brakes<br />[list][*] to reduce flex some people install Titanium Brake stiffeners[*]<br />[/quote]<br /><br />Hi Psycho,<br />I'm interested in the brakes stiffeners you mentioned - could you please elaborate. My bike <br />( http://www.pashley.co.uk/landrover/apb.htm ) has very thin seat stays and chain stays and having just upgraded to xt v-brakes from tectro cantilevers I'm worried about frame flex and fatigue. Any recomended brands/links<br />cheers<br />rifraf
-
rifraf - Brake stiffeners (a.k.a. Brake Boosters) will reduce frame and fork flex and improve braking performance:<br /><br />http://www.cambriabike.com/brakes/brkboost.htm <br /><br />http://www.davincitandems.com/comp.html (halfway down the page)<br /><br />Be sure to check if the one you’re looking to buy is compatible with V- brakes as some are made for cantilevers only.
-
Thanks for the tips/links Goat - appreciate it. 🙂<br />cheers<br />rifraf
-
center pull cantis are out! (you'll never get parts for them)<br /><br />go V - with those boosters or disc!
Active in the last 60 minutes
Active in this thread
0 users · 0 guests ·0 bots ·0 total
No signed-in users are active right now.
No known search crawlers active right now.