Carbon forks - worth the money?

"David Lubich" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

Hello Group I'm looking to buy a midrange hybrid, probably one of the Specialized Sirrus range.
All models are aluminium, but some of the higher-end ones have carbon forks, Given that weight is
not a huge issue for me (I'll need to lose a few lbs before it is?) what are the other advantages
of carbon forks over chr-mo? I've noticed that for the price of a bike with carbon forks and
low-end groupset I could get a 'last years model' with a chro-mo fork and 105 groupset. I really
can't decide between these two options, so would value all contributions. Equally, if anyone has
recommendations for a good hybrid (max £600) please inform me. Thanks in advance. David

I took off a cheap pair of chromo forks off my road (racing) bike and put on a set of carbon ones
and the difference was like adding front suspension, a horrible harsh ride was transformed into a
damped ride where I didn't feel every last ripple in the road surface.

The difference might also have something to do with moving from straight bladed forks to swept as
well but I've spoken to others who feel much the same about CF forks on road bikes.

Just my 2p

Russ

x-no-archive: yes

David Lubich said:

Hello Group I'm looking to buy a midrange hybrid, probably one of the Specialized Sirrus range.
All models are aluminium, but some of the higher-end ones have carbon forks, Given that weight is
not a huge issue for me (I'll need to lose a few lbs before it is?) what are the other advantages
of carbon forks over chr-mo? I've noticed that for the price of a bike with carbon forks and
low-end groupset I could get a 'last years model' with a chro-mo fork and 105 groupset. I really
can't decide between these two options, so would value all contributions. Equally, if anyone has
recommendations for a good hybrid (max £600) please inform me. Thanks in advance.

If your looking at an upright road bike you could also try
dawescycles.comdiscovery701.htmOpen ↗
ridgebackbikes.co.ukbike.aspOpen ↗

If in london conandale last years models from evanscycles.co.ukevanscycles.co.ukOpen ↗

Peter

David Lubich said:

I'm looking to buy a midrange hybrid, probably one of the Specialized Sirrus range. All models are
aluminium, but some of the higher-end ones have carbon forks, Given that weight is not a huge
issue for me (I'll need to lose a few lbs before it is?) what are the other advantages of carbon
forks over chr-mo?

They look cool and damp /some/ shock and vibration (in my experience), yet the blades (or "legs"😉
are stiffer. (Not sure if stiffness there really helps or not).

There is one serious disadvatage, though. That is when they break (in a crash for example), they
break catastrophically - like being perfectly ok one second then both blades snapping the next. With
steel forks, they may just bend, or one blade will go; you'll get some warning first. Also, steerer
tubes on carbon forks can be weaker/more flexible/less practical if they're aluminium or carbon (but
some, partcularly with the cheaper forks, are steel).

For a hybrid where weight is not an issue and there's a straightforward choice, I would opt for
cromo forks. These kind of bikes usually have wide enough tyres and an upright-enough position to
make the ride soft enough, anyway. The shock absorption aspect is more of an issue when drop bars
(hence more weight on hands) and narrow high pressure tyres are used where literally every little
bump in the road is jarring.

~PB

and the difference was like adding front suspension, a

Quoted message said:

horrible harsh ride was transformed into a damped ride where I didn't feel every last ripple in
the road surface.

The difference might also have something to do with moving from straight bladed forks to
swept as well

It's got to do with neither.

The difference is
1. In your head.
2. In your wallet.

All fork, except suspension give a harsh ride. It's tyre pressure makes the difference. Blindfold,
"experts" cannot tell the difference, because there's none.

In article <[email hidden]>, Gearóid Ó Laoi, Garry Lee
<[email hidden]> writes

Quoted message said:

and the difference was like adding front suspension, a

Quoted message said:

horrible harsh ride was transformed into a damped ride where I didn't feel every last ripple in
the road surface.

The difference might also have something to do with moving from straight bladed forks to swept
as well

It's got to do with neither.

The difference is
1. In your head.
2. In your wallet.

All fork, except suspension give a harsh ride. It's tyre pressure makes the difference. Blindfold,
"experts" cannot tell the difference, because there's none.

How do they avoid crashing into things?
--
The Big Baguette

Gearóid Ó Laoi said:

and the difference was like adding front suspension, a

Quoted message said:

horrible harsh ride was transformed into a damped ride where I didn't feel every last ripple in
the road surface.

The difference might also have something to do with moving from straight bladed forks to swept
as well

It's got to do with neither.

The difference is
1. In your head.
2. In your wallet.

All fork, except suspension give a harsh ride. It's tyre pressure makes the difference. Blindfold,
"experts" cannot tell the difference, because there's none.

I was very skeptical before trying carbon forks. I fully expected there to be no difference, but I
found there is actually quite a remarkable difference in feel to any steel forks on any bike I've
ever ridden. Of course tyres make /more/ difference, but that doesn't mean fork differences are
irrelevant (and the two effects are different, anyway). If one already has the widest, softest tyre
that one is prepared to tolerate, then any damping from the forks, no matter how slight, can still
be advantageous. Pretty simple logic, really. BTW, my carbon forks are cheap ones, so there's no
"wallet effect" for me, and being a fussy git who moans about components for small reasons, I would
have no hesitation in criticising them in public.

I think you've been hanging around rec.bicycles.tech.makes.no.difference too much. A lot of the
"folks" there couldn't tell the difference between 140 and 180mm cranks, night and day, or hot and
cold! There is some superb expertise there but their Luditism is painful.

~PB

"Gearóid Ó Laoi, Garry Lee" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

All fork, except suspension give a harsh ride. It's tyre pressure makes

the

Quoted message said:

difference. Blindfold, "experts" cannot tell the difference, because there's none.

How on earth do these "experts" ride a bike blinfolded? This is the second time somebody has made
this rather astonishing claim on this ng. I'd really like to see anybody ride a bike more than a few
feet blindfolded.

Gearóid Ó Laoi, Garry Lee <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

and the difference was like adding front suspension, a

Quoted message said:

horrible harsh ride was transformed into a damped ride where I didn't

feel

Quoted message said:

Quoted message said:

every last ripple in the road surface.

The difference might also have something to do with moving from straight bladed forks to swept
as well

It's got to do with neither.

The difference is
1. In your head.
2. In your wallet.

Sweeping statement that - in view of the fact that you've never ridden my bike with either forks on.
I can categorically say the new forks transformed the ride of my bike - what I can't be sure of is
why that was and how much was due to the materials the fork was made of. It may be that similarly
well made and designed forks made of a different material would have made a similar difference but a
difference there certainly is.

Quoted message said:

All fork, except suspension give a harsh ride. It's tyre pressure makes

the

Quoted message said:

difference. Blindfold, "experts" cannot tell the difference, because there's none.

Strange then that I've never changed the tyres on that bike and always run at 110psi. In this
particular case you're mistaken even if what you say *may* be generally true.

Russ

On Mon, 24 Feb 2003 07:01:38 -0000, "Gearóid Ó Laoi, Garry Lee" <[email hidden]>
blathered:

Quoted message said:

and the difference was like adding front suspension, a

Quoted message said:

horrible harsh ride was transformed into a damped ride where I didn't feel every last ripple in
the road surface.

Quoted message said:

The difference is
1. In your head.
2. In your wallet.

All fork, except suspension give a harsh ride. It's tyre pressure makes the difference. Blindfold,
"experts" cannot tell the difference, because there's none.

No. Even different steel forks can make a big difference to riding comfort. I'm currently running a
set of the On-One rigid disk only steel forks, having swapped out a set of Dave Yates custom steel
forks. The former are MUCH less harsh than the latter over rough ground. The Dave Yates forks are
very good at what they're designed to do - carry panniers for long distances without flexing all
over the shop.

Pete
----
btinternet.com~peteajonesOpen ↗

"Pete Biggs" <[email hidden]> wrote in message
news:<[email hidden]>...

Quoted message said:

David Lubich said:

I'm looking to buy a midrange hybrid, probably one of the Specialized Sirrus range. All models
are aluminium, but some of the higher-end ones have carbon forks, Given that weight is not a
huge issue for me (I'll need to lose a few lbs before it is?) what are the other advantages of
carbon forks over chr-mo?

They look cool and damp /some/ shock and vibration (in my experience), yet the blades (or "legs"😉
are stiffer. (Not sure if stiffness there really helps or not).

There is one serious disadvatage, though. That is when they break (in a crash for example), they
break catastrophically - like being perfectly ok one second then both blades snapping the next.
With steel forks, they may just bend, or one blade will go; you'll get some warning first. Also,
steerer tubes on carbon forks can be weaker/more flexible/less practical if they're aluminium or
carbon (but some, partcularly with the cheaper forks, are steel).

For a hybrid where weight is not an issue and there's a straightforward choice, I would opt for
cromo forks. These kind of bikes usually have wide enough tyres and an upright-enough position to
make the ride soft enough, anyway. The shock absorption aspect is more of an issue when drop bars
(hence more weight on hands) and narrow high pressure tyres are used where literally every little
bump in the road is jarring.

~PB

I changed the front forks of my Lo-Pro last season, because I wanted something lighter and more
aero. Mad no detectable difference to the feel of the bike, but did make it lighter. (More aero?
Well, I don't know...)

Robert

"Pete Biggs" <[email hidden]> wrote in message
news:<[email hidden]>...

Quoted message said:

There is one serious disadvatage, though. That is when they break (in a crash for example), they
break catastrophically - like being perfectly ok one second then both blades snapping the next.
With steel forks, they may just bend, or one blade will go; you'll get some warning first.

Which is why I've always been a bit sceptical about carbon forks for 'cross bikes - they have to put
up with a lot more punishment than their road-specific cousins. Roger Hammond seems to manage OK on
steel forks, anyhow!

Quoted message said:

For a hybrid where weight is not an issue and there's a straightforward choice, I would opt for
cromo forks. These kind of bikes usually have wide enough tyres and an upright-enough position to
make the ride soft enough, anyway. The shock absorption aspect is more of an issue when drop bars
(hence more weight on hands) and narrow high pressure tyres are used where literally every little
bump in the road is jarring.

Not always - both of my bikes have Columbus Cr-Mo (SL on the 'cross bike and SLX on the road bike)
frames and forks in conjunction with drop bars, and neither is uncomfortable, not even the road bike
(the comfiest road bike I've ever owned - hats off to Terry Dolan) with its 23mm tyres. Fat tyres on
the 'cross machine do probably help, though.

David E. Belcher

Dept. of Chemistry, University of York

"Russell Pinder" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

Strange then that I've never changed the tyres on that bike and always run at 110psi. In this
particular case you're mistaken even if what you say *may* be generally true.

I read this from a position of total ignorance, neither ever having used carbon forks or knowing
anything about the materials elasticity (or whatever).

But I find it hard to believe the effect is so pronounced that you can be certain of it, I'm not
saying it doesn't exist just that human perception is very dodgy. Are you really saying you could
tell in a blind test?

Frank said:

"Russell Pinder" <[email hidden]> wrote in message

Quoted message said:

Strange then that I've never changed the tyres on that bike and always run at 110psi. In this
particular case you're mistaken even if what you say *may* be generally true.

I read this from a position of total ignorance, neither ever having used carbon forks or knowing
anything about the materials elasticity (or whatever).

People who do will tell you that it doesn't make a difference. For this they are labelled Luddites.

You'll notice that _not one_ of the people doing the labelling has carried out a blind test.
--
David Damerell <[email hidden]> Kill the tomato!

"David E. Belcher" <[email hidden]> wrote in message > Not always - both of my bikes have
Columbus Cr-Mo (SL on the 'cross

Quoted message said:

bike and SLX on the road bike) frames and forks in conjunction with drop bars, and neither is
uncomfortable, not even the road bike (the comfiest road bike I've ever owned - hats off to Terry
Dolan) with its 23mm tyres. Fat tyres on the 'cross machine do probably help, though.

Ditto. I had a Peugeot SLX with 23mm 120 PSI tyres and it was oh so comfortable.

The four bikes I currently own all feel diffent in the way they ride. Discounting the full sus one
leaves 3 rigid bikes, 2 are mtbs of different materials and price points. Swapping the same wheels
between the pair reveals different ride characteristics which you'd have to be devoid of sensation
to not notice but that doesn't mean that were I able to ride blindfolded I'd be able to guess frame
material, there is more to it.

And while a rigid bike is a rigid bike that will jar if ridden over a pothole different frames will
dampen (or not) vibration in different ways that will be subjective and may be beneficial on a long
ride but hardly of importance if nipping to the local shop.

Pete

Frank said:

I read this from a position of total ignorance, neither ever having used carbon forks or knowing
anything about the materials elasticity (or whatever).

But I find it hard to believe the effect is so pronounced that you can be certain of it, I'm not
saying it doesn't exist just that human perception is very dodgy. Are you really saying you could
tell in a blind test?

Put it this way: imagine riding on plastic forks. That's virtually what they feel like. Afterall,
they are made of carbon fibres embedded in epoxy resin, a kind of plastic. They are laterally stiff
yet damp some vertical vibration/shock.

The effect seemed remarkably pronounced to me when I first tried them (when I happened to be
concentrating on everything but fork material and road buzz/shock at the time), but I'm not going to
make any claims about blind tests* (although I suspect I could tell). I can understand those wanting
scientific proof but I urge skeptics to actually try carbon forks (on a bike where the advantages
would be most useful) before rubbishing them too strongly. It is easily possible that no adequate
test has been developed or that nobody has bothered to test properly yet.

Many critics dismiss them just because there can't be as much as several mm of movement and because
tyres make more difference. That seems a bit dumb to me, to say the least - and mostly originates
from country where everything is big so they don't notice the small things in life!! :-)
/Relatively/ small effects can still be detected by humans (for sure) and be useful.

* Forks would be disguised instead of rider being blind-folded.

~PB

Gearóid Ó Laoi said:

All fork, except suspension give a harsh ride. It's tyre pressure makes the difference. Blindfold,
"experts" cannot tell the difference, because there's none.

From www.sheldonbrown.com/rinard_forktest.html , part of article by expert Damon Rinard :

"Is there more to comfort besides deflection? Yes. There are two sources of discomfort in the road:
gross bumps (like potholes or reflector dots you hit at speed) are one. The other is the smaller
texture of the pavement itself. This texture produces a high frequency buzzing in the handlebars
that is constantly present.

"The gross bumps can be made more bearable with a fork that flexes a little more. For extremely
bumpy roads (like Paris-Roubaix), there are even suspension forks. But the second source of
discomfort, the constant vibration, is harder to address. About the only way a normal road fork can
lessen them is by the natural damping properties inherent in the material used to make the fork.

"Road forks are made of steel, aluminum, titanium, and carbon. Of these, carbon is known to damp
vibrations about ten times better than the metals. This damping is the reason carbon forks can be
both stiff and comfortable. You will still get the jolt of the big bumps with a stiff carbon fork,
but the vibrations will be decreased. And a flexible carbon fork is really plush.

"If you ever get the chance, try an experiment to experience the difference in damping: ring a
carbon fork (like a tuning fork) by slapping it once into the palm of your hand and hold it near
your ear, then compare it to a metal fork. The carbon fork damps out the vibrations within seconds,
but the metal fork vibrates noticeably longer. Another good illustration of composite's damping
compared to metals is a handrail. A metal handrail, if struck, will ring and vibrate for several
seconds, but a wooden one (wood is nature's composite) just goes ìthunk.î "
- Damon Rinard

-------------
I also think that the properties of carbon take the edge off the bigger bumps to a noticeable degree
as well, but this hasn't been proved.

~PB

Ok so we seem to have two groups here. Those that think carbon fibre forks give a better ride than
metal ones and those that think a fork is so rigid compared with the tyres that you can't really
tell. A question for those in the first camp. Do the advantages of carbon work elsewhere on the bike
to. Does a carbon wishbone rear end give a more comfortable ride than a metal one and could the same
effect be achieved "just" by using a carbon seat pin?

Cheers,

Andy

I reckon my carbon bars transmit less trail 'buzz' than a Al one but the effect is far less
pronounced especially as I have 2.3cm tyres and 100mm travel suspension forks on that
particular bike.

The effect is supposed to be felt in frames, seatposts and the like but I've not tried them.

Russ

<[email hidden]> wrote in message "]news:[email hidden]...

Quoted message said:

Ok so we seem to have two groups here. Those that think carbon fibre forks give a better ride than
metal ones and those that think a fork is so rigid compared with the tyres that you can't really
tell. A question for those

in

Quoted message said:

the first camp. Do the advantages of carbon work elsewhere on the bike to. Does a carbon wishbone
rear end give a more comfortable ride than a metal one and could the same effect be achieved
"just" by using a carbon seat

pin?

Quoted message said:

Cheers,

Andy

Russell Pinder <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

I reckon my carbon bars transmit less trail 'buzz' than a Al one but the effect is far less
pronounced especially as I have 2.3cm tyres and 100mm

that should of course read 2.3 inch !! doh!

Quoted message said:

travel suspension forks on that particular bike.

The effect is supposed to be felt in frames, seatposts and the like but

I've

Quoted message said:

not tried them.

Russ

Quoted message said:

<[email hidden]> wrote in message "]news:[email hidden]...

Quoted message said:

Ok so we seem to have two groups here. Those that think carbon fibre

forks

Quoted message said:

Quoted message said:

give a better ride than metal ones and those that think a fork is so

rigid

Quoted message said:

Quoted message said:

compared with the tyres that you can't really tell. A question for those

in

Quoted message said:

the first camp. Do the advantages of carbon work elsewhere on the bike

to.

Quoted message said:

Quoted message said:

Does a carbon wishbone rear end give a more comfortable ride than a

metal

Quoted message said:

Quoted message said:

one and could the same effect be achieved "just" by using a carbon seat

pin?

Quoted message said:

Cheers,

Andy