Quoted post said:Originally posted by Wle
whenever i ride a bike with shocks, it always feels mushy to me and out of control, so in general i
don;t like them.
but - is it true that any shock absorbing mechanism wastes energy that could be used to propel the
bike ahead?
it seems that this must be true..
wle.
When irregularities in the road/trail impart vertical movement of the bike and the larger, there is a conversion of the kinetic energy in the longitudinal direction to a vertical direction. Unless the surface is smooth enough on the return from irregularity to return that loss back in the line of travel, the vertical kinetic energy is not redirected back into longitudinal kinetic energy and is lost to the rider. Also, there are energy losses associated with the flexing of the tire, particularly the sidewall as the tire load changes.
A suspension system allows the wheels to travel up and down without having the heavier rider and frame travel in the vertical direction. The initial vertical direction of the rider/frame suspension would initiate a vertical oscillation of the rider/frame up and down.
The shock absorber damps this oscillation after the deflection-travel by scrubbing off this oscillating energy as heat in a controlled return zero oscillation, analogous to a brake on a wheel.
On the down side, suspension and shock absorbers also add weight to the bike, so there is more rolling resistance on flat level surfaces and more mass to move up hills, and often some aero drag added is to the vehicle.
At some point the energy saved with the suspension by minimizing the travel of the frame & rider is exceeded by the losses of the system. That will differ based on the specifics of the suspension, riding surface, and amount of sprung weight. That tradeoff varies greatly with differing roads and surfaces
There are also instances of the suspension traveling due to pedaling creating a moment about the pivot points, often oscillating and sometimes referred to as pogoing. That also is an oscillation the shock absorber needs dampen.
In summary, the shock absorber itself dissipates kinetic energy from the bike, the suspension system as a whole reduces losses by vertical deflection and travel of which are often energy losers, but introduces its own unique losses not found on an unsprung bike.