I recently bought the Avocet Vertech watch with a dead battery. I easily managed to place a fresh battery in it.
Now I'm confronted with being on an altitude of 38470Ft (11750m and I'm on sea level!)and a temperature of 118F (48C whilst it should read 19C). This seems not to be correct! I read some earlier postings on the subject of exchanging the battery and resetting it but this was not helping me at all.
Is it too early to assume that the watch is beyond repair or is there a way to have altitude and temperature readings correctly.
Could there be something went wrong when placing the new battery?
I recently bought the Avocet Vertech watch with a dead battery. I easily managed to place a fresh battery in it.
Now I'm confronted with being on an altitude of 38470Ft (11750m and I'm on sea level!)and a temperature of 118F (48C whilst it should read 19C). This seems not to be correct! I read some earlier postings on the subject of exchanging the battery and resetting it but this was not helping me at all.
Is it too early to assume that the watch is beyond repair or is there a way to have altitude and temperature readings correctly.
Could there be something went wrong when placing the new battery?
_Likely, they recalibrate it when replaced at the Avocet service center. You are not supposed to replace it yourself. Sending it to the Avocet service center is a pain, but probably the only way to get it working again.
[email hidden] (bonkema) wrote in message news:<[email hidden]>...
Quoted message said:
I recently bought the Avocet Vertech watch with a dead battery. I easily managed to place a fresh battery in it.
Now I'm confronted with being on an altitude of 38470Ft (11750m and I'm on sea level!)and a temperature of 118F (48C whilst it should read 19C). This seems not to be correct! I read some earlier postings on the subject of exchanging the battery and resetting it but this was not helping me at all.
Is it too early to assume that the watch is beyond repair or is there a way to have altitude and temperature readings correctly.
Could there be something went wrong when placing the new battery?
Could be. Did you reset the unit using the button inside the case? I don't claim to know that that will fix the problem, but that is part of the procedure for replacing the battery as I understand it.
There is a little reset button inside the watch. If a recall correctly it is a thin metal tab that you push. After the reset you can adjust the barometer if you know the pressure where you are at.
<[email hidden].- edu> wrote in message "]news:[email hidden]...
Quoted message said:
-----BEGIN PGP SIGNED MESSAGE-----
In article <[email hidden]>, bonkema
Quoted message said:
I recently bought the Avocet Vertech watch with a dead battery. I easily managed to place a fresh battery in it.
Now I'm confronted with being on an altitude of 38470Ft (11750m and I'm on sea level!)and a temperature of 118F (48C whilst it should read 19C). This seems not to be correct! I read some earlier postings on the subject of exchanging the battery and resetting it but this was not helping me at all.
Is it too early to assume that the watch is beyond repair or is there a way to have altitude and temperature readings correctly.
Could there be something went wrong when placing the new battery?
_Likely, they recalibrate it when replaced at the Avocet service center. You are not supposed to replace it yourself. Sending it to the Avocet service center is a pain, but probably the only way to get it working again.
[email hidden] (bonkema) wrote in message news:<[email hidden]>...
Quoted message said:
I recently bought the Avocet Vertech watch with a dead battery. I easily managed to place a fresh battery in it.
Now I'm confronted with being on an altitude of 38470Ft (11750m and I'm on sea level!)and a temperature of 118F (48C whilst it should read 19C). This seems not to be correct! I read some earlier postings on the subject of exchanging the battery and resetting it but this was not helping me at all.
tectonic plate movement? no, wait, air temperature should go down with an elevation increase. i think 'high hell' is just a saying.
Quoted message said:
Is it too early to assume that the watch is beyond repair or is there a way to have altitude and temperature readings correctly.
i've used the same(?) VerTech for 10-yrs or so. i'd send it to Avocet every other battery change for a refresh (maybe they updated the module over the years). your use of 'whilst' suggest this may not be convenient but any number generating device needs to be calibrated on occasion if you want to trust the numbers. <www.blackboxvoting.com>
Quoted message said:
Could there be something went wrong when placing the new battery?