A little CADing, a little CNCing...

Jon Bond said:

we had to make a "medallion" in one of my classes while
learning how to do CNC stuff. limited to 2.5 dimensions
(2d surfaces with height differences) because we only have
one good 3d CNC machine, but this is what I came up with.
Its attached to an Air motor - spins a good 1500RPM with a
small compressor. I might go make a keychain out of a
similar design after my finals are done (2 more days!)

pbase.com28813943Open ↗

Jon Bond

That's funny... Today was the first day of summer classes
for me. Spring semester ended 1.5 weeks ago.
--
Phil, Squid-in-Training

"Jon Bond" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

we had to make a "medallion" in one of my classes while
learning how to do CNC stuff. limited to 2.5 dimensions
(2d surfaces with height

differences)

Quoted message said:

because we only have one good 3d CNC machine, but this is
what I came up with. Its attached to an Air motor - spins
a good 1500RPM with a small compressor. I might go make a
keychain out of a similar design after my finals are done
(2 more days!)

pbase.com28813943Open ↗

Jon Bond

Sweet! I want one one of those keychains! 😉

Very nice job.

--

FlyingCoyote

--

Jon Bond said:

we had to make a "medallion" in one of my classes while
learning how to do CNC stuff. limited to 2.5 dimensions
(2d surfaces with height differences) because we only have
one good 3d CNC machine, but this is what I came up with.
Its attached to an Air motor - spins a good 1500RPM with a
small compressor. I might go make a keychain out of a
similar design after my finals are done (2 more days!)

pbase.com28813943Open ↗

Did they teach you about copyright infringements yet?-)

--
--
John G. in Memphis, TN Have a nice......... night.
shavings.netreflect john.jpgOpen ↗

ZeeExSixAre said:

That's funny... Today was the first day of summer classes
for me. Spring semester ended 1.5 weeks ago.

Just took my last final Friday, I will NEVER take 5 courses
(15 hours) in one semester again still managed a 3.4 but
what a burden!

Summer-I starts May 28 only taking 6 hours each summer term
I like summer terms, 6 weeks and you are done ;-)

--
John G. in Memphis, TN Have a nice......... night.
shavings.netreflect john.jpgOpen ↗

Jon Bond <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

we had to make a "medallion" in one of my classes while
learning how to do CNC stuff. limited to 2.5 dimensions
(2d surfaces with height

differences)

Quoted message said:

because we only have one good 3d CNC machine, but this is
what I came up with. Its attached to an Air motor - spins
a good 1500RPM with a small compressor. I might go make a
keychain out of a similar design after my finals are done
(2 more days!)

pbase.com28813943Open ↗

Jon Bond

Wait till you look at a fifth axis program... its like going
from baisic to c++

"Jon Bond" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

we had to make a "medallion" in one of my classes while
learning how to do CNC stuff. limited to 2.5 dimensions
(2d surfaces with height

differences)

Quoted message said:

because we only have one good 3d CNC machine, but this is
what I came up with. Its attached to an Air motor - spins
a good 1500RPM with a small compressor. I might go make a
keychain out of a similar design after my finals are done
(2 more days!)

pbase.com28813943Open ↗

Nice looking work. Mazak would be proud.

"Chris Arnold" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

Jon Bond <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

we had to make a "medallion" in one of my classes while
learning how to

do

Quoted message said:

Quoted message said:

CNC stuff. limited to 2.5 dimensions (2d surfaces with
height

differences)

Quoted message said:

because we only have one good 3d CNC machine, but this
is what I came up with. Its attached to an Air motor -
spins a good 1500RPM with a small compressor. I might go
make a keychain out of a similar design after my finals
are done (2 more days!)

pbase.com28813943Open ↗

Jon Bond

Wait till you look at a fifth axis program... its like
going from baisic

to

Quoted message said:

c++

Used to work at a place that had fifth axis machine. A Mazak
QT 28 (or 30??). In fact, it had to be sent back to Mazak to
have the deck shaved, and the entire internals reversed (the
fifth axis was hitting the deck). It was one of only three
in the world of this configuration, at the time. All three
were in the company.

How about some bke parts. Chainings ,spiders,crankarms,
keyrings are a dime a a dozen.

I MTB 2004

mojo deluxe <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

"Chris Arnold" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

Jon Bond <[email hidden]> wrote in
message "]news:[email hidden]...

Quoted message said:

we had to make a "medallion" in one of my classes
while learning how

to

Quoted message said:

do

Quoted message said:

Quoted message said:

CNC stuff. limited to 2.5 dimensions (2d surfaces with
height

differences)

Quoted message said:

because we only have one good 3d CNC machine, but this
is what I came

up

Quoted message said:

Quoted message said:

Quoted message said:

with. Its attached to an Air motor - spins a good
1500RPM with a

small

Quoted message said:

Quoted message said:

Quoted message said:

compressor. I might go make a keychain out of a
similar design after

my

Quoted message said:

Quoted message said:

Quoted message said:

finals are done (2 more days!)

pbase.com28813943Open ↗

Jon Bond

Wait till you look at a fifth axis program... its like
going from baisic

to

Quoted message said:

c++

Used to work at a place that had fifth axis machine. A
Mazak QT 28 (or 30??). In fact, it had to be sent back to
Mazak to have the deck shaved,

and

Quoted message said:

the entire internals reversed (the fifth axis was hitting
the deck). It

was

Quoted message said:

one of only three in the world of this configuration, at
the time. All

three

Quoted message said:

were in the company.

I work with two fifth axis machines, a haas and a fadal, too
bad the haas is a piece of [censored].

"Chris Arnold" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

mojo deluxe <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

"Chris Arnold" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

Jon Bond <[email hidden]> wrote in
message "]news:[email hidden]...
> we had to make a "medallion" in one of my classes
> while learning how

to

Quoted message said:

do

Quoted message said:

> CNC stuff. limited to 2.5 dimensions (2d surfaces
> with height
differences)
> because we only have one good 3d CNC machine, but
> this is what I

came

Quoted message said:

up

Quoted message said:

Quoted message said:

> with. Its attached to an Air motor - spins a good
> 1500RPM with a

small

Quoted message said:

Quoted message said:

> compressor. I might go make a keychain out of a
> similar design

after

Quoted message said:

my

Quoted message said:

Quoted message said:

> finals are done (2 more days!)
>
> pbase.com28813943Open ↗
>
> Jon Bond

Wait till you look at a fifth axis program... its like
going from

baisic

Quoted message said:

Quoted message said:

to

Quoted message said:

c++

Used to work at a place that had fifth axis machine. A
Mazak QT 28 (or 30??). In fact, it had to be sent back
to Mazak to have the deck shaved,

and

Quoted message said:

the entire internals reversed (the fifth axis was
hitting the deck). It

was

Quoted message said:

one of only three in the world of this configuration, at
the time. All

three

Quoted message said:

were in the company.

I work with two fifth axis machines, a haas and a fadal,
too bad the haas

is

Quoted message said:

a piece of [censored].

We had one Haas, and the guys who operated it shared your
sentiments. The Haas was not a fifth axis though.