LoomerMBV said:I am looking for help getting the correct spring weight
for myself so bear with me. With Gear I am 220 pounds. I
get 35% sag and major brake dive now.
I pulled my 02 Jr T's apart and found that there are 2
springs in each leg. I am assuming that one is for a 100mm
fork and the other is for a 70mm fork.
Ok the 100mm is red and the 70mm is green.
Supposedly the 100mm red is for a 170 to 205 pound rider.
Supposedly the 70mm is for a 120 to 155 pound rider.
If I take the mid point of both springs and divide by 2 I
get a 161 pound average rider weight,
Are my calculations/assumptions correct?
Is it better to upgrade the 70mm or 100mm springs?
Which should be heavier, the 70mm or the 100mm springs?
Does it matter? Anyone around my weight have opinions?
TIA
Dang, I thought you were crazy, but sure enough the manual
shows springs per leg... that's whack!
I'm not too sure about your math because I don't think you
can average the spring rate like that. I mean a 120-155
spring rate is just that no matter how you stack them. But
then I was never good at word problems in math.
Look you already know you're a bit under sprung based on
your sag (not that bad) and diving (really bad). So hears
what I would, first thing in the morning call Marzocchi tech
support and tell them whats going on, then let them tell you
which springs you need. I believe they'll sell them direct,
but I'm not positive. If not, at least you'll know what you
need and you can start making some calls.
Just out of curiosity, did you buy this fork new from a shop
or used (private party)?
Btw, I aint no expert... maybe Carla and Mike are. Both of
them certainly have way more experience then me.
--
Slacker