Cycling Equipment · Public discussion

number of times SRAM Link?

Started by Bill Black · · Last activity · 14 posts · 524 views

This thread is locked and is currently read-only.

Thread navigation

Jump through the discussion

Go to the original post, the replies on this page, or the latest preserved contribution.

Thread details

What we know about this thread

Original section
Cycling Equipment
Published
14 June 2004
Last activity
17 June 2004
Original author
Bill Black
Posts
14
Discussion status
Public discussion
Total views
524
Views / 30 days
0
Topics

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–14 of 14
Posts remain in their original chronological order.

Text size
  1. How many chains do you use the SRAM link on before pitching
    it? Best, Bill Black

  2. 2

    (205lbs masher/sprinter)

    On 6/14/04 7:04 AM, in article
    [email hidden], "Bill

    Black said:

    How many chains do you use the SRAM link on before
    pitching it? Best, Bill Black

  3. "Bill Black" <[email hidden]> wrote in message
    "]news:[email hidden]...

    Quoted message said:

    How many chains do you use the SRAM link on before
    pitching it? Best, Bill Black

    Carry a spare, just in case. Doesn't weigh anything and they
    have been known to break. Mine did. I had the spare. Five
    minutes later in the middle of the Blue ridge Parkway I was
    riding again, no tools required. Bill Brannon

  4. Bill Black said:

    How many chains do you use the SRAM link on before
    pitching it? Best, Bill Black

    Just one. It will wear at about the same rate as the other
    links, so why use one worn link in a new chain?

    Dave Lehnen

  5. If you're talking about the "quick release" link (A.K.A.
    Craig "SuperLink"😉, I usually keep one for the entire
    life of the chain (about 5000-6000 miles) this way the
    link's wear stays about the same as the rest of the
    chain throughout it's life. When the chain wears out,
    the SRAM link goes into the recycle bin with the chain.
    New chain, new link.

    I usually have to re-wax every 4-500 miles, depending on
    weather, mud, etc. so, depending on other repairs, about 6-
    10 changes, total.

    - -

    "May you have the wind at your back. And a really low gear
    for the hills!"

    Chris Zacho ~ "Your Friendly Neighborhood Wheelman"

    Chris'Z Corner geocities.comczcorner

  6. On 14 Jun 2004 07:04:06 -0700, [email hidden] (Bill Black) may have

    Quoted message said:

    How many chains do you use the SRAM link on before
    pitching it?

    My opinion: Inspect when you replace the chain (and, if the
    link was already a used part when installed, at any
    subsequent removal) and replace when the pins are visibly
    worn, or when the link does not latch properly.

    If you're buying SRAM chains that are not bulk-packed, they
    should be supplied with a new connector link. I retain the
    old Powerlinks when I take an SRAM chain off, and keep them
    as emergency spares if they're not worn.

    --
    My email address is antispammed; pull WEEDS if replying via
    e-mail. Typoes are not a bug, they're a feature. Words
    processed in a facility that contains nuts.

  7. Dave Lehnen said:

    Just one. It will wear at about the same rate as the other
    links, so why use one worn link in a new chain?

    I disagree. The posts of the removable link wear the holes
    they attach to. With a new chain, you get new holes. The
    removable link doesn't wear the same way as the rest of
    the chain.

    I get over 5,000 miles on a chain and haven't worn out
    a link yet.

  8. wrb-<< How many chains do you use the SRAM link on before
    pitching it?

    Quoted message said:
    Quoted message said:

    <BR><BR>

    Should not reuse with a new chain. You 'should' get a new
    one with a new chain. Use when removing/cleaning and then
    pitch along wth the chain.

    Peter Chisholm Vecchio's Bicicletteria 1833 Pearl St.
    Boulder, CO, 80302
    (303)440-3535 vecchios.comvecchios.com "Ruote convenzionali
    costruite eccezionalmente bene"

  9. "Bill Black" <[email hidden]> wrote in message
    "]news:[email hidden]...

    Quoted message said:

    How many chains do you use the SRAM link on before
    pitching it?

    Zero. I throw them out when I get the chain and use a chain
    tool. Total waste of time if you ride in the rain a lot and
    have a dirty chain. Just finding the stupid thing takes
    longer than popping a rivet. -- Jay Beattie.

  10. Jay Beattie said:

    "Bill Black" <[email hidden]> wrote in message

    Quoted message said:

    How many chains do you use the SRAM link on before
    pitching it?

    Zero. I throw them out when I get the chain and use a chain
    tool. Total waste of time if you ride in the rain a lot and
    have a dirty chain. Just finding the stupid thing takes
    longer than popping a rivet. -- Jay Beattie.

    Send 'em to me. I'll send you some SASEs...
    --
    Rick Onanian

  11. Jay Beattie said:

    "Bill Black" <[email hidden]> wrote in message

    Quoted message said:

    How many chains do you use the SRAM link on before
    pitching it?

    Zero. I throw them out when I get the chain and use a
    chain tool.

    Do you use 10-speed chains?

  12. "Jay Hill" <[email hidden]> wrote in message
    "]news:[email hidden]...

    Quoted message said:
    Jay Beattie said:

    "Bill Black" <[email hidden]> wrote in message

    Quoted message said:

    How many chains do you use the SRAM link on before
    pitching


    it?

    Quoted message said:
    Quoted message said:


    Zero. I throw them out when I get the chain and use a
    chain tool.

    Do you use 10-speed chains?

    No, I use a mix of 8 and 9 speed chains. -- Jay Beattie.

  13. "Jay Beattie" <[email hidden]> wrote in message news:<[email hidden]>...

    Quoted message said:

    "Jay Hill" <[email hidden]> wrote in message
    "]news:[email hidden]...

    Quoted message said:
    Jay Beattie said:

    "Bill Black" <[email hidden]> wrote in message

    >How many chains do you use the SRAM link on before
    >pitching


    it?

    Quoted message said:
    Quoted message said:


    Zero. I throw them out when I get the chain and use a
    chain tool.

    Do you use 10-speed chains?

    No, I use a mix of 8 and 9 speed chains. -- Jay Beattie.

    If you have any SRAM links for 8 or 9 speed chains you're
    not using, let me know how much you want for them! Thanks

  14. I'll look and see if I have any. -- Jay Beattie.
    "bfd" <[email hidden]> wrote in message
    "]news:[email hidden]...

    Quoted message said:

    "Jay Beattie" <[email hidden]> wrote in message


    news:<[email hidden]>...

    Quoted message said:
    Quoted message said:

    "Jay Hill" <[email hidden]> wrote in message
    "]news:[email hidden]...

    Quoted message said:

    Jay Beattie wrote:
    > "Bill Black" <[email hidden]> wrote in message
    >
    >>How many chains do you use the SRAM link on before


    pitching

    Quoted message said:
    Quoted message said:

    it?

    Quoted message said:

    >
    > Zero. I throw them out when I get the chain and
    > use a


    chain

    Quoted message said:
    Quoted message said:
    Quoted message said:

    > tool.

    Do you use 10-speed chains?

    No, I use a mix of 8 and 9 speed chains. -- Jay Beattie.

    If you have any SRAM links for 8 or 9 speed chains
    you're not


    using,

    Quoted message said:

    let me know how much you want for them! Thanks

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.