I need to lengthen my rear road axle (Shimano). Can I just substitute a MTB
axle, or are the diameters different? Shimano's website lists MTB diameter
as 10mm, but no road lisitng is given...
Thanks for input.
Jan
A community for cyclists, gear, training and racing.
Cycling Equipment · Public discussion
Thread details
The navigation and discussion metadata provide context. Posts remain in their original chronological order.
I need to lengthen my rear road axle (Shimano). Can I just substitute a MTB
axle, or are the diameters different? Shimano's website lists MTB diameter
as 10mm, but no road lisitng is given...
Thanks for input.
Jan
Yes, you can substitute an MTB axle. I've done that on a couple of Shimano
road hubs to change them to 135mm spacing.
American Classic also make good quality CrMo replacement axles.
Nick
"basjan" <[email hidden]> wrote in message
news:[email hidden]...
Quoted message said:I need to lengthen my rear road axle (Shimano). Can I just substitute a
MTB
Quoted message said:axle, or are the diameters different? Shimano's website lists MTB
diameter
Quoted message said:as 10mm, but no road lisitng is given...
"LAN Support" <[email hidden]> wrote in message
news:[email hidden]...
Quoted message said:Yes, you can substitute an MTB axle. I've done that on a couple of Shimano
road hubs to change them to 135mm spacing.American Classic also make good quality CrMo replacement axles.
Nick
Do you have to use the MTB cones and bearings, or can you just swap out
axles and use all the road "stuff"?
Thanks for your help on this!
Jan
Quoted message said:"basjan" <[email hidden]> wrote in message
news:[email hidden]...Quoted message said:I need to lengthen my rear road axle (Shimano). Can I just substitute a
MTBQuoted message said:axle, or are the diameters different? Shimano's website lists MTB
diameterQuoted message said:as 10mm, but no road lisitng is given...
"basjan" <[email hidden]> wrote in message news:<[email hidden]>...
Quoted message said:
Do you have to use the MTB cones and bearings, or can you just swap out
axles and use all the road "stuff"?Thanks for your help on this!
Jan
You should use the original cones that came with the hub. I've done
this on Shimano 105 and Ultegra hubs in order to widen them to 135mm
width. The new axle and a 5mm spacer are all you need.
Jeff
try harris cyclery's site-search into parts catalog then see Wheels
Manufacturing axles. shim's are 10mm x1. if using a rack and touring
consider the extra long axle. one belts the assembley back together,
on the road, without regard to micro adjustments. the metal is
excellent and with less than normal intelligence can be starightened
with a vise and tool, hammer or pipe fit over. and felt pen and level
for straightness checks off course
Active in the last 60 minutes
0 users · 0 guests ·0 bots ·0 total
No signed-in users are active right now.
No known search crawlers active right now.