rec.sport.unicycling · Public discussion

3.7/ KH conversion

Started by musketman · · Last activity · 7 posts · 335 views

Thread navigation

Jump through the discussion

Go to the original post, the replies on this page, or the latest preserved contribution.

Thread details

What we know about this thread

Original section
rec.sport.unicycling
Published
8 October 2005
Last activity
9 October 2005
Original author
musketman
Posts
7
Discussion status
Public discussion
Total views
335
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–7 of 7
Posts remain in their original chronological order.

Text size
  1. :eek: Stupid questions about to come... beware! :eek: Can the new 3.7
    tyre fit into a kh frame? I'm guessing not, but it seems like the frame
    width is enough to fit 4" in there, or is it the clearance part of this
    that doesn't make it? Or both? Could you get a 29" KH frame and put the
    26 by 3.7 tyre on it? Or a 24" frame and put a 24" by 3.7 tyre in it?
    Has anyone tried?

    --
    musketman
    ------------------------------------------------------------------------
    musketman's Profile: http://www.unicyclist.com/profile/9214
    View this thread: http://www.unicyclist.com/thread/43836

  2. if you speak of the 3.7 listed earlier it will fit the KH 29er frame
    privided that the width of the frame is compatible and only the 24rim
    will fit the 26 beccomes a 29er due to the massivity(is that a word?)
    of the tyre...hope that helps

    -Phil

    --
    trials_uni

    You can't get up and try it again if you don't fall first.
    -Phil
    ------------------------------------------------------------------------
    trials_uni's Profile: http://www.unicyclist.com/profile/10953
    View this thread: http://www.unicyclist.com/thread/43836

  3. I dont think the 24x3.7 has come out yet.

    --
    KcTheAcy

    ¤-Kaycee
    http://gallery.unicyclist.com/Kaycees-Unicycle-gallery

    http://www.maineunicyclist.2ya.com/
    ------------------------------------------------------------------------
    KcTheAcy's Profile: http://www.unicyclist.com/profile/5003
    View this thread: http://www.unicyclist.com/thread/43836

  4. Its possible, I don't have a new kh frame to actually measure though.
    Also bear in mind that the 3.7" tyre relates to tread width and the
    actual distance between the sidewalls on each side may be as much as
    4". Its worth trying, but I wouldn't bet much on it without checking
    first... Since the only 3.7" tyre is for a 26" wheel you'd need to use
    a 29" KH frame.

    Loose.

    --
    Loosemoose

    Dave: "I had a particularly bad UPD & found I'd lost a shoe"
    Officially a  & ~ expert.

    _no1_quote_of_crawley_2005:_
    Leigh: "Where's Trevor"
    Baz: "I think he's upstairs, balancing The Bishop"
    ------------------------------------------------------------------------
    Loosemoose's Profile: http://www.unicyclist.com/profile/6326
    View this thread: http://www.unicyclist.com/thread/43836

  5. Loosemoose said:

    Its possible, I don't have a new kh frame to actually measure though.
    Also bear in mind that the 3.7" tyre relates to tread width and the
    actual distance between the sidewalls on each side may be as much as
    4". Its worth trying, but I wouldn't bet much on it without checking
    first... Since the only 3.7" tyre is for a 26" wheel you'd need to use
    a 29" KH frame.

    Loose.

    The overall width of the tire is 3.7" (94mm) on the Large Marge rim at
    30psi. The tire is widest at the sidewall...not at the edge of the
    tread. Flattened out, the tread measures 4" (102mm) across.

    Dave

    --
    SurlyDave
    ------------------------------------------------------------------------
    SurlyDave's Profile: http://www.unicyclist.com/profile/9294
    View this thread: http://www.unicyclist.com/thread/43836

  6. SurlyDave said:

    The overall width of the tire is 3.7" (94mm) on the Large Marge rim at
    30psi. The tire is widest at the sidewall...not at the edge of the
    tread. Flattened out, the tread measures 4" (102mm) across.

    Ah sorry, my mistake. I assumed the 3.7" measure was tread width while
    inflated, and the sidewalls were wider than that. Thanks for clearing
    that up Dave.

    Loose.

    --
    Loosemoose

    Dave: "I had a particularly bad UPD & found I'd lost a shoe"
    Officially a  & ~ expert.

    _no1_quote_of_crawley_2005:_
    Leigh: "Where's Trevor"
    Baz: "I think he's upstairs, balancing The Bishop"
    ------------------------------------------------------------------------
    Loosemoose's Profile: http://www.unicyclist.com/profile/6326
    View this thread: http://www.unicyclist.com/thread/43836

  7. I could try it, but im not spending the money to find out! It seems like
    it would work tho. I have an 05 kh frame and im pretty sure it is at
    least 4" across. If the KH 29 frame is the same across i don't see why
    it wouldn't work.

    --
    musketman
    ------------------------------------------------------------------------
    musketman's Profile: http://www.unicyclist.com/profile/9214
    View this thread: http://www.unicyclist.com/thread/43836

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.