99 Campy shilfters

Ooops, they are actually Chorus shifters and not Record. Parts: EC-CH347 and EC-CH248.

John

Remove the obvious to reply.
"JS" <[email hidden]> wrote in message news:[email hidden]...
After crashing on both sides, my Campy brake levers are badly scratched, part #'s: EC-RE447 and EC-RE348. Are these parts overly expensive to replace? Peter, do you carry these and how much?

Thanks,
John

JS said:

After crashing on both sides, my Campy brake levers are badly scratched,
part #'s: EC-RE447 and EC-RE348. Are these parts overly expensive to
replace? Peter, do you carry these and how much?

Not expensive, aluminum $40 each, carbon $90 each and all
models interchange. Very available.

The aluminum ones are also simple to remove, file, wetsand
and polish on a cotton wheel. You could barely tell they
were on the ground after.

--
Andrew Muzi
www.yellowjersey.org
Open every day since 1 April, 1971

In article <[email hidden]>,

A Muzi said:

JS said:

After crashing on both sides, my Campy brake levers are badly scratched,
part #'s: EC-RE447 and EC-RE348. Are these parts overly expensive to
replace? Peter, do you carry these and how much?

Not expensive, aluminum $40 each, carbon $90 each and all
models interchange. Very available.

Great jumping frijoles! "Not expensive"? Now, aluminum Shimano brake
levers do cost $10 more than the Campy ones, but they come attached to
Sora brifters*:

http://www.nashbar.com/profile.cfm?category=104&subcategory=1194&brand=&s
ku=3047&storetype=&estoreid=&pagename=

*probably not compatible with other Shimano brifters

--
Ryan Cousineau, [email hidden] http://www.sfu.ca/~rcousine/wiredcola/
President, Fabrizio Mazzoleni Fan Club

mcgyver-<< my Campy brake levers are badly scratched, =
part #'s: EC-RE447 and EC-RE348. Are these parts overly expensive to =
replace? Peter, do you carry these and how much? >><BR><BR>

Yes we have them and they are $60 per lever.

Peter Chisholm
Vecchio's Bicicletteria
1833 Pearl St.
Boulder, CO, 80302
(303)440-3535
http://www.vecchios.com
"Ruote convenzionali costruite eccezionalmente bene"

ryan-<< Great jumping frijoles! "Not expensive"? Now, aluminum Shimano brake
levers do cost $10 more than the Campy ones, but they come attached to
Sora brifters*: >><BR><BR>

Seen the price of DA 10s levers lately?
If you are going to mention oranges to this guys apples-Mirage levers are a LOT
less than Sora, Veloce a LOT less thanTiagra or 105...etc.

Peter Chisholm
Vecchio's Bicicletteria
1833 Pearl St.
Boulder, CO, 80302
(303)440-3535
http://www.vecchios.com
"Ruote convenzionali costruite eccezionalmente bene"

In article <[email hidden]>,

(Qui si parla Campagnolo ) said:

ryan-<< Great jumping frijoles! "Not expensive"? Now, aluminum Shimano brake
levers do cost $10 more than the Campy ones, but they come attached to
Sora brifters*: >><BR><BR>

Seen the price of DA 10s levers lately?
If you are going to mention oranges to this guys apples-Mirage levers are a
LOT
less than Sora, Veloce a LOT less thanTiagra or 105...etc.

Oh, okay. So those were Record levers. I understand that they're
compatible up and down the line, but from your description I assumed
that was the only separate brake lever you could buy.

Building a Campy-only BMX,
--
Ryan Cousineau, [email hidden] http://www.sfu.ca/~rcousine/wiredcola/
President, Fabrizio Mazzoleni Fan Club