BC trick?

I was wondering if anyone has done this on a BC,

1. roll toward object(bench would work)
2. jump off BC
3. jump over the bench while the BC goes under
4. land on BC and keep rolling

I got the trick from skateboarding, has anyone done it?

--
mornish

Quoted message said:

<>UNICYCLING FOR MYSLELF TOO<><

"LX seats are as comfortable as bricks." lildude2
"CX seats are bricks."
------------------------------------------------------------------------
mornish's Profile: http://www.unicyclist.com/profile/11658
View this thread: http://www.unicyclist.com/thread/50555

I have thought about it but its alot harder on a bc than a skateboard
because a skateboard can fit under alot more stuff than a bc can.

--
litldude2

Gallery.unicyclist.com/spencer
AIM: Litldude2
Email: Litldude2 (att) aol (dott) com
(See a pattern?)
............'Bedford Unicycles' (BedfordUnicycles.ca)
------------------------------------------------------------------------
litldude2's Profile: http://www.unicyclist.com/profile/6134
View this thread: http://www.unicyclist.com/thread/50555

I have thought about it but its alot harder on a bc than a skateboard
because a skateboard can fit under alot more stuff than a bc can.

--
litldude2

Gallery.unicyclist.com/spencer
AIM: Litldude2
Email: Litldude2 (att) aol (dott) com
(See a pattern?)
............'Bedford Unicycles' (BedfordUnicycles.ca)
------------------------------------------------------------------------
litldude2's Profile: http://www.unicyclist.com/profile/6134
View this thread: http://www.unicyclist.com/thread/50555

I can see the problem.

Hmmm, you could build a little obstacle like this:

I-----------------I
I I
I I
I I
I I
I I

out of 2 by 4's, buut that would take a while

--
mornish

Quoted message said:

<>UNICYCLING FOR MYSLELF TOO<><

"LX seats are as comfortable as bricks." lildude2
"CX seats are bricks."
------------------------------------------------------------------------
mornish's Profile: http://www.unicyclist.com/profile/11658
View this thread: http://www.unicyclist.com/thread/50555

I can see the problem.

Hmmm, you could build a little obstacle like this:

I-----------------I
I I
I I
I I
I I
I I

out of 2 by 4's, buut that would take a while

--
mornish

Quoted message said:

<>UNICYCLING FOR MYSLELF TOO<><

"LX seats are as comfortable as bricks." lildude2
"CX seats are bricks."
------------------------------------------------------------------------
mornish's Profile: http://www.unicyclist.com/profile/11658
View this thread: http://www.unicyclist.com/thread/50555

pretend the second column of I's is on the other side of the drawing🙂

--
mornish

Quoted message said:

<>UNICYCLING FOR MYSLELF TOO<><

"LX seats are as comfortable as bricks." lildude2
"CX seats are bricks."
------------------------------------------------------------------------
mornish's Profile: http://www.unicyclist.com/profile/11658
View this thread: http://www.unicyclist.com/thread/50555

pretend the second column of I's is on the other side of the drawing🙂

--
mornish

Quoted message said:

<>UNICYCLING FOR MYSLELF TOO<><

"LX seats are as comfortable as bricks." lildude2
"CX seats are bricks."
------------------------------------------------------------------------
mornish's Profile: http://www.unicyclist.com/profile/11658
View this thread: http://www.unicyclist.com/thread/50555

Yeah, I have looked at tables (they def. won't fit under benches) and
most ables have a solid side or a bar that goes across the bottom.

It would also be hard to jump off it it that high without pushing it
over. I can no footer pretty well and if I try to go for a huge
extention it falls over really easily. The other problem is sometimes
it gets turned a little bit when you jump off but if you are coming
straight back down you can still land on it and correct it. If it is
going 5-6' under a table then it will probably hit something.

I would like to see it be done but you might have to build something
special for it (enough clearance to allow the bc to go through but not
huge so you have to leap off).

edit: and that I am talking about a 20", with a 24" it would just cause
more problems.

--
litldude2

Gallery.unicyclist.com/spencer
AIM: Litldude2
Email: Litldude2 (att) aol (dott) com
(See a pattern?)
............'Bedford Unicycles' (BedfordUnicycles.ca)
------------------------------------------------------------------------
litldude2's Profile: http://www.unicyclist.com/profile/6134
View this thread: http://www.unicyclist.com/thread/50555

Yeah, I have looked at tables (they def. won't fit under benches) and
most ables have a solid side or a bar that goes across the bottom.

It would also be hard to jump off it it that high without pushing it
over. I can no footer pretty well and if I try to go for a huge
extention it falls over really easily. The other problem is sometimes
it gets turned a little bit when you jump off but if you are coming
straight back down you can still land on it and correct it. If it is
going 5-6' under a table then it will probably hit something.

I would like to see it be done but you might have to build something
special for it (enough clearance to allow the bc to go through but not
huge so you have to leap off).

edit: and that I am talking about a 20", with a 24" it would just cause
more problems.

--
litldude2

Gallery.unicyclist.com/spencer
AIM: Litldude2
Email: Litldude2 (att) aol (dott) com
(See a pattern?)
............'Bedford Unicycles' (BedfordUnicycles.ca)
------------------------------------------------------------------------
litldude2's Profile: http://www.unicyclist.com/profile/6134
View this thread: http://www.unicyclist.com/thread/50555

[image: http://i83.photobucket.com/albums/j288/evanbyrne/52303.gif]

--
Evan Byrne
------------------------------------------------------------------------
Evan Byrne's Profile: http://www.unicyclist.com/profile/9367
View this thread: http://www.unicyclist.com/thread/50555

[image: http://i83.photobucket.com/albums/j288/evanbyrne/52303.gif]

--
Evan Byrne
------------------------------------------------------------------------
Evan Byrne's Profile: http://www.unicyclist.com/profile/9367
View this thread: http://www.unicyclist.com/thread/50555

Evan Byrne said:

[image: http://i83.photobucket.com/albums/j288/evanbyrne/52303.gif]

sorry im gonna have to agree with evan

--
dale_dale

biggest set/gap = 4 set
------------------------------------------------------------------------
dale_dale's Profile: http://www.unicyclist.com/profile/11459
View this thread: http://www.unicyclist.com/thread/50555

Evan Byrne said:

[image: http://i83.photobucket.com/albums/j288/evanbyrne/52303.gif]

sorry im gonna have to agree with evan

--
dale_dale

biggest set/gap = 4 set
------------------------------------------------------------------------
dale_dale's Profile: http://www.unicyclist.com/profile/11459
View this thread: http://www.unicyclist.com/thread/50555

lol

--
dan de man

tomtrevor said:

how the hell do u get fluro brown??? it would also probably look like
uve dunked the uni in a big pile of [censored]

iridemymuni said:

What colour [censored] do you do tom ? flouro brown [censored]? thats kinda weird

tomtrevor said:

y do u want to know the colour of my [censored]? like that just isn't natural
for someone to think that.

------------------------------------------------------------------------
dan de man's Profile: http://www.unicyclist.com/profile/11403
View this thread: http://www.unicyclist.com/thread/50555

lol is banned

so i am gonna have to say... hahaha

--
jake_amos

Mike_Foote said:

And Cleopatra. I'd F*** her. And maybe also the virgin mary. I'd F***
her to.

mawesome said:

Pffffffft, I just make mine out of left over wrapping paper and orphan
bones.

i am the eggman
[email hidden] add me
www.jakespants.blogspot.com
------------------------------------------------------------------------
jake_amos's Profile: http://www.unicyclist.com/profile/11587
View this thread: http://www.unicyclist.com/thread/50555

somedody has done it on uw
'' (http://www.unicycling.org/unicycling/uw.html)
go down to the section about jump over pole

--
unicycle dave

<><unicycle for Christ
------------------------------------------------------------------------
unicycle dave's Profile: http://www.unicyclist.com/profile/10416
View this thread: http://www.unicyclist.com/thread/50555