bike frame for a Big bloke

Quoted message said:

He does some green laning, commuting and pleasure riding. So, what frame
should he be looking at?

Custom built?

Mark Thompson said:

Quoted message said:

He does some green laning, commuting and pleasure riding. So, what frame
should he be looking at?

Custom built?

Is solid aluminium bar stronger than steel tube of the same dimensions?
Probably still needs cusom building though.

peter

naked_draughtsman said:

Mark Thompson said:

Quoted message said:

He does some green laning, commuting and pleasure riding. So, what frame
should he be looking at?

Custom built?

Is solid aluminium bar stronger than steel tube of the same dimensions?
Probably still needs cusom building though.

Maybe just go with one of the manufacturers that offer a lifetime
warranty on frames, and keep schtum about the fact that he's actually
a shaved grizzly bear in trousers.

"Bob"
--

Email address is spam trapped, to reply directly remove the beverage.

Phil Clarke said:

friend of mine is, hmm, approx 22 stone (he's not weeble shaped, he's
6'7"😉 His Scott MTB frame has split. Scott in the UK and US have been
pretty [censored] about it IMHO.

So he's thinking about transfering his bits (XT kit, hand-built wheels)
to a new industrial strength frame. He's open minded about the cost.

He does some green laning, commuting and pleasure riding. So, what frame
should he be looking at?

regards .. Phil

Curtis?

--
---
Marten Gerritsen

INFOapestaartjeM-GINEERINGpuntNL
www.m-gineering.nl

"naked_draughtsman" <[email hidden]> wrote in message
news:[email hidden]...

Quoted message said:

Mark Thompson said:

Quoted message said:

He does some green laning, commuting and pleasure riding. So, what
frame
should he be looking at?

Custom built?

Is solid aluminium bar stronger than steel tube of the same dimensions?
Probably still needs cusom building though.

peter

Solid aluminium bar of any given weight/length will be _less_ strong than
aluminium tube of the same weight. Steel will be less rigid and therefore
less likely to break, but will need to be heavy enough not to be _too_
flexible.

Phil Clarke said:

So he's thinking about transfering his bits (XT kit, hand-built
wheels) to a new industrial strength frame. He's open minded about
the cost.
He does some green laning, commuting and pleasure riding. So, what
frame should he be looking at?

Tell him to talk to Mercian. They'll custom build him a frame for his size
and weight and it'll probably cost him less than an "off the shelf" from a
lot of other manufacturers.

Or send him to this url http://www.merciancycles.co.uk/frame_canyon.asp

Tom
--
Return address is dead. Real address is at
http://toomanybikes.com/address.jpg

Phil Clarke said:

friend of mine is, hmm, approx 22 stone (he's not weeble shaped, he's
6'7"😉 His Scott MTB frame has split. Scott in the UK and US have been
pretty [censored] about it IMHO.

So he's thinking about transfering his bits (XT kit, hand-built
wheels) to a new industrial strength frame. He's open minded about
the cost.
He does some green laning, commuting and pleasure riding. So, what
frame should he be looking at?

Custom built ? Mercian or Roberts would be my suggestions, about equal
distances for travel, depends if he prefers a slog up to Mercian or a
deepest Croyden. I'd estimate that a frame would be £500-£600.
Roberts certainly make hard-tail MTBs and other things which would suit the
list of uses mentioned, not sure if Mercian do, but suspect they have
something.

Is friend likely to be known to me ? Reply via non-public means if
appropriate.

- Nigel

--
Nigel Cliffe,
Webmaster at http://www.2mm.org.uk/

Phil Clarke said:

friend of mine is, hmm, approx 22 stone (he's not weeble shaped, he's
6'7"😉 His Scott MTB frame has split. Scott in the UK and US have been
pretty [censored] about it IMHO.

So he's thinking about transfering his bits (XT kit, hand-built wheels)
to a new industrial strength frame. He's open minded about the cost.

He does some green laning, commuting and pleasure riding. So, what frame
should he be looking at?

What about a Thorn Nomad xxl. It has an additional tube from the head
tube to halfway up the seat tube and an additional pair of rear stays
to reduce the flexing found in larger frames. I've not tried one but it
looks a good solution for a big rider.

Iain

Nigel Cliffe said:

Is friend likely to be known to me ?

Andy, aka. Captain Chaos. Came with us on that trail hack near
Alton Water. Big guy with more enthusiasm than grace. 🙂

works on site.

Phil Clarke said:

friend of mine is, hmm, approx 22 stone (he's not weeble shaped, he's
6'7"😉 His Scott MTB frame has split. Scott in the UK and US have been
pretty [censored] about it IMHO.

So he's thinking about transfering his bits (XT kit, hand-built wheels)
to a new industrial strength frame. He's open minded about the cost.

He does some green laning, commuting and pleasure riding. So, what frame
should he be looking at?

regards .. Phil

We have been discussing same issue here. cyclingforums.comt326624.htmlOpen ↗

Here's some good info as well : zinncycles.comzinncycles.comOpen ↗

lw

thanks for advice all. Passed it on ....