In message <[email hidden]>, TribalKev
<[email hidden]> writes
Quoted message said:I am considering buying a traler to take the sprogs out on my bike however after doing some
research they all seem to attatch to the rear triangle of the bike.
Not all, but most do as standard.
Quoted message said:Heres where my problem starts, i own a Orange Sub5 and it doesnt have a rear traingle, instead it
has a box section swing arm which tapers down to about 1 1/2" by 3/4" will it be possible to attach
a trailer to this. I would try it out but none of my local bike shops stock any trailers.
I doubt that the standard hitches will fit that as they are as you say designed to clamp around a
normal rear triangle.
But you can get fixings that attach to the rear wheel axle.
I have a Chariot trailer, and chose to have Weber hitch fitted instead of the standard one. This has
part attached to the bike and the hitch arm slots onto this.
You can get alternative bike fixtures, one of which is an axle fitting attachment (it stays attached
to the bike, but is not that bulky or heavy)
AIUI Chariot now do their own alternative hitches which can have an axle fitting attachment.
Have a look at Two plus Two.
<http://www.twoplustwo.uk.com/ctrailers/index.html>
--
Chris French, Leeds