Here are a few pics of what i've accomplished on Day 1 and even this wonderful setback=smashing finger with hammer and drilling through the nail with a dremel to release the pressure. If you guys get any ideas after looking at what i've done feel free to comment.
That looks like a lot of fun, except for your finger....
One thing I noticed about the course is you have a lot of skinnies, but not much of other stuff. You should try taking a few of the skinny bits out, and gapping betwixt the spools. OR something.
That looks like a lot of fun, except for your finger....
One thing I noticed about the course is you have a lot of skinnies, but not much of other stuff. You should try taking a few of the skinny bits out, and gapping betwixt the spools. OR something.
Wait, you hit your finger with a hammer (on accident I assume), the used your Dremeled a hole in your nail (on purpose) to release the pressure. Damn, that's got to hurt. Well, it is a nice setup you have there. Is the finger injury going to stop you from riding?
Wait, you hit your finger with a hammer (on accident I assume), the used your Dremeled a hole in your nail (on purpose) to release the pressure. Damn, that's got to hurt. Well, it is a nice setup you have there. Is the finger injury going to stop you from riding?
yea i drilled a hole through it. My dad's a doctor and said i would lose the nail if i didn't drill a hole. I still have two healthy legs to ride so i should be ok.
**Go to any local electric company and ask them if they have any leftover reels. They will more than likely throw them at you because they have no where to put them.
can the skinnies be added and removed easily? because the widest one, from what i saw, is the wide side of a 2x4 and i expect that after riding on the stuff for a while you may want to try skinnier skinnies. also, i agree that you should have more than just skinnies. spools are great for practicing hopping and pedal grabs and such.
