Australia and New Zealand · Public discussion

Cleaning my MTB

Started by Ozzii Pete · · Last activity · 8 posts · 547 views

Thread navigation

Jump through the discussion

Go to the original post, the replies on this page, or the latest preserved contribution.

Thread details

What we know about this thread

Original section
Australia and New Zealand
Published
23 December 2003
Last activity
2 January 2004
Original author
Ozzii Pete
Posts
8
Discussion status
Public discussion
Total views
547
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–8 of 8
Posts remain in their original chronological order.

Text size
  1. Hi guys, I want to give my MTB a good clean this weekend, my question is,
    can I just buy some cheap Degreaser and spray it everywhere, then hose it
    of, and just relube everything, or will this do damage, and I should get
    some proper stuff.
    Any tips ?
    Thanks again

  2. "Ozzii Pete" <[email hidden]> wrote in message
    news:[email hidden]...

    Quoted message said:

    Hi guys, I want to give my MTB a good clean this weekend, my question is,
    can I just buy some cheap Degreaser and spray it everywhere, then hose it
    of, and just relube everything, or will this do damage, and I should get
    some proper stuff.
    Any tips ?

    I use engine degreaser on my MTB, and it works well.

    You just need to be very careful that it does not get into the semisealed
    parts, otherwise it can cause you problems.

    Make sure you don't get any in the bottom bracket, pedals or hubs.

    Enjoy!

    Tim

  3. Tim Jones said:

    "Ozzii Pete" <[email hidden]> wrote in message
    news:[email hidden]...

    Quoted message said:

    Hi guys, I want to give my MTB a good clean this weekend, my question is,
    can I just buy some cheap Degreaser and spray it everywhere, then hose it
    of, and just relube everything, or will this do damage, and I should get
    some proper stuff.
    Any tips ?

    I use engine degreaser on my MTB, and it works well.

    You just need to be very careful that it does not get into the semisealed
    parts, otherwise it can cause you problems.

    Make sure you don't get any in the bottom bracket, pedals or hubs.

    And headset!
    ---
    DFM

  4. Ozzii Pete said:

    Hi guys, I want to give my MTB a good clean this weekend, my question is,
    can I just buy some cheap Degreaser and spray it everywhere, then hose it
    of, and just relube everything, or will this do damage, and I should get
    some proper stuff.
    Any tips ?

    My tip would be to use a bucket of hot water and detergent, and a parts
    cleaning brush, and do your cleaning with that.

    Degreaser will impact on the rubber components of your bike - tyres,
    seals, brake pads.

    Once you've cleaned it with the hot water and detergent (and a bit of
    elbow grease) allow it to dry properly and then touch up moving parts
    and rubber bits with Inox (good corrosion inhibitor, water displacer,
    and general protectant.

    ---
    Cheers

    PeterC

    [Rushing headlong: out of control - and there ain't no stopping]
    [and there's nothing you can do about it at all]

  5. On Tue, 23 Dec 2003 15:33:36 +1000, "Ozzii Pete" <[email hidden]>

    Quoted message said:

    Hi guys, I want to give my MTB a good clean this weekend, my question is,
    can I just buy some cheap Degreaser and spray it everywhere, then hose it


    Avoid doing this on the lawn......the degreaser will kill it
    Cheers Andy

  6. My bike shop reckons that degreaser is bad news on a bicycle full stop - any
    gets into the hubs, bb, etc and your looking at a not so pleasant ride
    anymore.

    Soap and water tends to work fine for me

    "Andy©" <[email hidden]> wrote in message
    news:[email hidden]...

    Quoted message said:

    On Tue, 23 Dec 2003 15:33:36 +1000, "Ozzii Pete" <[email hidden]>

    Quoted message said:

    Hi guys, I want to give my MTB a good clean this weekend, my question is,
    can I just buy some cheap Degreaser and spray it everywhere, then hose it


    Avoid doing this on the lawn......the degreaser will kill it
    Cheers Andy

  7. Jiz said:

    My bike shop reckons that degreaser is bad news on a bicycle full stop - any
    gets into the hubs, bb, etc and your looking at a not so pleasant ride
    anymore.

    Soap and water tends to work fine for me

    "Andy©" <[email hidden]> wrote in message
    news:[email hidden]...

    Quoted message said:

    On Tue, 23 Dec 2003 15:33:36 +1000, "Ozzii Pete" <[email hidden]>

    Quoted message said:

    Hi guys, I want to give my MTB a good clean this weekend, my question is,
    can I just buy some cheap Degreaser and spray it everywhere, then hose it

    Avoid doing this on the lawn......the degreaser will kill it
    Cheers Andy


    I use some "Bug Off" (windscreen washer bottle stuff) diluted with
    water, cleans the bike up nicely. Stubborn grease etc comes off if you
    use it undiluted on a rag.

    Would this wreck any bearings it got into?

    &roo

  8. Andrew Swan:

    Quoted message said:

    I use some "Bug Off" (windscreen washer bottle stuff) diluted with
    water, cleans the bike up nicely. Stubborn grease etc comes off if you
    use it undiluted on a rag.

    Would this wreck any bearings it got into?

    Pretty much anything that isn't grease will not be good to your
    bearings, plain water included.

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.