Mountain Bikes · Public discussion

clipless pedal question(Time specifically)

Started by William Pughe · · Last activity · 10 posts · 503 views

Thread navigation

Jump through the discussion

Go to the original post, the replies on this page, or the latest preserved contribution.

Thread details

What we know about this thread

Original section
Mountain Bikes
Published
26 April 2004
Last activity
28 April 2004
Original author
William Pughe
Posts
10
Discussion status
Public discussion
Total views
503
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–10 of 10
Posts remain in their original chronological order.

Text size
  1. Well, my trusted Ritchies died last year so I'm needing to get some new
    pedals. I picked up a pair of Speedplay, but unfortunately they don't
    let you clip out to the inside. My shins are sick of getting trapped
    between my bike and the rocks. They're great for non-technical riding,
    which pretty much rules out all the trails I ride around here.

    I was looking at the Time cleats this weekend, and noticed that they
    are not symmetrical. Does this make it harder to clip out in one direction
    than the other? Basically I would like a pedal that is easy to clip out of
    in both directions, doesn't get gummed up with mud, and has some float.

    Thanks in adavance.

    Will

  2. "William Pughe" <[email hidden]> wrote in message
    news:[email hidden]...

    Quoted message said:

    Well, my trusted Ritchies died last year so I'm needing to get some new
    pedals. I picked up a pair of Speedplay, but unfortunately they don't
    let you clip out to the inside. My shins are sick of getting trapped
    between my bike and the rocks. They're great for non-technical riding,
    which pretty much rules out all the trails I ride around here.

    I was looking at the Time cleats this weekend, and noticed that they
    are not symmetrical. Does this make it harder to clip out in one


    direction

    Quoted message said:

    than the other? Basically I would like a pedal that is easy to clip out


    of

    Quoted message said:

    in both directions, doesn't get gummed up with mud, and has some float.


    You would have to grind the cleat a little to clip out on the inside.

  3. "William Pughe" <[email hidden]> wrote in message
    news:[email hidden]...
    Basically I would like a pedal that is easy to clip out of

    Quoted message said:

    in both directions, doesn't get gummed up with mud, and has some float.

    Time ATACS do that for me.

  4. Have you thought about the Ritchie Pros .They are designed Like the shamano
    959 .Work good for me .Good mud clearance and a little float .
    Just my opionion

    --
    J/O TrailBlazer At Large

  5. Jamie TrailBlazer At Large said:

    Have you thought about the Ritchie Pros .They are designed Like the shamano
    959 .Work good for me .Good mud clearance and a little float .
    Just my opionion

    --
    J/O TrailBlazer At Large


    All options are still on the table, just trying to figure out what's best.
    Ritchie definitely makes good pedals.

    However, the LBS has Time in stock, and I'd like them before heading to CO/UT
    next week.

  6. William Pughe said:
    Jamie TrailBlazer At Large said:

    Have you thought about the Ritchie Pros .They are designed Like the shamano
    959 .Work good for me .Good mud clearance and a little float .
    Just my opionion

    --
    J/O TrailBlazer At Large

    All options are still on the table, just trying to figure out what's best.
    Ritchie definitely makes good pedals.

    However, the LBS has Time in stock, and I'd like them before heading to CO/UT
    next week.

    I missed the start of this thread, sorry if this response is out of context.
    I recently switched to Eggbeaters and am very happy. They don't seem to
    have the "positive snap in/out" that I am used to with Shimano, but they
    feel very good. I've had zero problems in slightly muddy conditions, and
    the slightly smaller platform does not seem to bother me. No comment on
    their long term durability ... yet.

    --
    Craig Brossman, Durango Colorado
    (remove ".nospam" to reply)

  7. William Pughe said:

    Well, my trusted Ritchies died last year so I'm needing to get some new
    pedals. I picked up a pair of Speedplay, but unfortunately they don't
    let you clip out to the inside. My shins are sick of getting trapped
    between my bike and the rocks. They're great for non-technical riding,
    which pretty much rules out all the trails I ride around here.

    I was looking at the Time cleats this weekend, and noticed that they
    are not symmetrical. Does this make it harder to clip out in one direction
    than the other? Basically I would like a pedal that is easy to clip out of
    in both directions, doesn't get gummed up with mud, and has some float.

    Thanks in adavance.

    Will

    I have been using the ATAC's for about three years on my road and mtn
    bikes. They clip out in both directions with no problem and work well
    in all conditions with little to not maintenance. They also take a
    lot of abuse. My riding buddy uses the original egg beaters and they
    work equally well, unless you are not clipped in, then they tend to
    roll under your feet. If you go that route I highly suggest the ones
    with the platform.

  8. William Pughe <[email hidden]> wrote in message news:<[email hidden]>...

    Quoted message said:


    I was looking at the Time cleats this weekend, and noticed that they
    are not symmetrical. Does this make it harder to clip out in one direction
    than the other? Basically I would like a pedal that is easy to clip out of
    in both directions, doesn't get gummed up with mud, and has some float.


    I've been using Time ATACs for 4-5 years now. You can definitely clip
    out in both directions. Because they're asymetrical, it takes a
    different amount of rotation to unclip in each direction. Time now
    marks the cleats right & left, but mentions mounting them reversed if
    you tend to ride with your toes pointing in.

    They are excellent in New England mud, both clipping in and out. The
    bearings on my original Carbons have been amazingly durable. They've
    outlasted 2, maybe 3 XT bottom brackets with zero maintenance.

    Downside is the wear issue. As the cleats wear your retention
    gradually diminishes. The pedals wear (at a slower rate) too, so
    cleats reach their effective end of life quicker as the pedals age.

    They have some float, but nothing like Frogs. The amount of float also
    varies over time depending on the relative wear of the cleats &
    pedals.

    HTH, Dave Dowler

  9. Craig Brossman said:
    William Pughe said:

    "Jamie TrailBlazer At Large" <[email hidden]> writes:

    Quoted message said:
    Quoted message said:

    Have you thought about the Ritchie Pros .They are designed Like the shamano
    959 .Work good for me .Good mud clearance and a little float .
    Just my opionion

    --
    J/O TrailBlazer At Large


    All options are still on the table, just trying to figure out what's
    best.

    Quoted message said:

    Ritchie definitely makes good pedals.
    However, the LBS has Time in stock, and I'd like them before heading
    to CO/UT

    Quoted message said:

    next week.

    I missed the start of this thread, sorry if this response is out of context.
    I recently switched to Eggbeaters and am very happy. They don't seem
    to have the "positive snap in/out" that I am used to with Shimano, but
    they feel very good. I've had zero problems in slightly muddy
    conditions, and the slightly smaller platform does not seem to bother
    me. No comment on their long term durability ... yet.

    --
    Craig Brossman, Durango Colorado
    (remove ".nospam" to reply)


    The egg beaters look good, but I've heard that the cleats wear out really
    quickly. Which isn't a problem I guess, as long as it's easy to change
    the cleats.

  10. William Pughe said:

    Craig Brossman <[email hidden]> writes:

    Quoted message said:
    Quoted message said:

    I missed the start of this thread, sorry if this response is out of context.
    I recently switched to Eggbeaters and am very happy. They don't seem
    to have the "positive snap in/out" that I am used to with Shimano, but
    they feel very good. I've had zero problems in slightly muddy
    conditions, and the slightly smaller platform does not seem to bother
    me. No comment on their long term durability ... yet.

    --
    Craig Brossman, Durango Colorado
    (remove ".nospam" to reply)

    The egg beaters look good, but I've heard that the cleats wear out really
    quickly. Which isn't a problem I guess, as long as it's easy to change
    the cleats.

    I have heard the same, but they are easy to change.

    --
    Craig Brossman, Durango Colorado
    (remove ".nospam" to reply)

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.