J Jones said:Just wanted to check the group to get opinions (good and bad) about using
CO2 vs. carrying a pump. Since frames no longer include the pump 'nipple',
I'd have to use velcro straps to attach the pump to the top bar, which is
pretty clunky (imo).
Amusing. I got into this _before_ many frames had a braze-on pump peg.
My current road bike actually has one, but I don't use it.
Quoted message said:Also, what are
the preferred brands of CO2 systems and/or pumps? Jeff
Topeak Road Morph is by far the best pump I have ever seen. I use it all
the time to pump up the tires of other folks on the ride who have flats.
I ask them how much pressure they want, and they say something like
"110psi, if you can manage it" -- but that is absolutely no problem for
this pump. 130psi+ would take some serious work, but IMO that's pretty
over the top, anyway. Most mini pumps cannot manage more than 80psi.
CO2 can manage higher pressures only if you use more than one cartridge.
Use the old one from the previous flat to start inflation and get some
volume in there, then break out a new one to get some real pressure. As
far as brands, I have no idea what I have, but be _sure_ to get the kind
that can use the cheap threadless cartridges. Spending $2+ per cartridge
for threaded, versus $0.25 for threaded, is a no-brainer. My holder
actually encloses the cartridge, presses onto a presta valve (threads onto
a Shraeder valve), and can hold a partially-used cartridge in the seat
bag, with some pressure left, as long as the trigger isn't pressed by
stuff in the bag.
--
David L. Johnson
__o | It is a scientifically proven fact that a mid life crisis can
_`\(,_ | only be cured by something racy and Italian. Bianchis and
(_)/ (_) | Colnagos are a lot cheaper than Maserattis and Ferraris. --
Glenn Davies