Your pedal should be about half as far from the object as the object is
high. If you're crank grabbing on a 1 foot high ledge, then your crank
grabbing pedal should be about 6 inches away.
You don't want to be too close, or too far. If you're too close, then
you jump upward, but you can't go over until you get high enough. If
you're too far, then you'll be going too fast horizontally, hit the
ledge, and tip over.
What you want to try to do is jump from the right distance, and make a
clean, diagonal hop. But you're gonna land it a bit differently than a
normal side hop. When you land a sidehop, you normally land leaning
away from the direction you were hopping (at least I do) to help absorb
all that momentum. In a crankgrab, when you first leave the ground,
your body will be like this (you're jumping towards the left): \ As
you land, you want the unicycle to be completely upright, with the
crank resting on the ledge. But your body should be leaning a little
bit outside. The way I balance is by having most of my weight on the
grabbing crank, but leaning towards the outside. You might find it
easier to balance with different ways though, so experiment and find
which one you like best.
Good luck.
--
monkeyman
~Alex Brown
------------------------------------------------------------------------
monkeyman's Profile: http://www.unicyclist.com/profile/11455
View this thread: http://www.unicyclist.com/thread/56423