rec.sport.unicycling · Public discussion

Crank Thread Holes

Started by maximus unius · · Last activity · 10 posts · 242 views

Thread navigation

Jump through the discussion

Go to the original post, the replies on this page, or the latest preserved contribution.

Thread details

What we know about this thread

Original section
rec.sport.unicycling
Published
20 December 2006
Last activity
21 December 2006
Original author
maximus unius
Posts
10
Discussion status
Public discussion
Total views
242
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–10 of 10
Posts remain in their original chronological order.

Text size
  1. After a couple days of research and not finding anything I have decided
    to make this thread.

    The problem is with the pedal thread holes on wide cranks. I noticed
    that on my DX cranks the threaded hole for the pedals goes all the way
    through out the other side. My pedals when screwed in all the way only
    extend halfway through the hole. I am worried about water and stuff
    getting into the other end of the hole, rusting and breaking down the
    metal, and causing weakness. What do people do about this, or am I just
    paranoid?

    --
    maximus unius

    Quoted message said:

    Originally Posted by *Beener*
    Is ISIS, ISIS, is ISIS not ISIS, is KOXX ISIS really ISIS, is Kris Holm
    ISIS more ISIS than KOXX ISIS, ISISISISISIS!


    ------------------------------------------------------------------------
    maximus unius's Profile: http://www.unicyclist.com/profile/13699
    View this thread: http://www.unicyclist.com/thread/55895

  2. You could fill it with somthing I sopose...

    --
    thejdw

    torkerdx said:

    another bit of advice:
    shut up and ride🙂

    some people get the concept, some don't


    ------------------------------------------------------------------------
    thejdw's Profile: http://www.unicyclist.com/profile/13230
    View this thread: http://www.unicyclist.com/thread/55895

  3. Really woudn't worry about it, structural rust damage in thick materal
    like a crank is very unlikely. If you're really bothered pack some
    grease in the hole, oir find a plastic plug as used in the KH '03
    cranks.

    --
    kington99

    Dave

    - what a thoroughly post-modern subversion of the cycling genre -
    ------------------------------------------------------------------------
    kington99's Profile: http://www.unicyclist.com/profile/9417
    View this thread: http://www.unicyclist.com/thread/55895

  4. maximus unius said:

    I am worried about water and stuff getting into the other end of the
    hole, rusting and breaking down the metal, and causing weakness. What
    do people do about this, or am I just paranoid?

    This isn't anything to worry about. Most cranks are made of a metal
    that is resistant to corrosion so you'd have to leave your uni out in
    the rain to experience any significant damage... I've been doing no
    more than hanging my uni in the garage after my rides (muddy, rainy or
    not) and it's been doing fine for years.

    The only thing you should be doing is putting a little anti-sieze on
    your pedal threads before screwing them into the cranks. This will
    ensure your pedals don't rust themselves into place, if they do decide
    to rust. Be sure to put a fresh coat of anti-sieze on your pedals (and
    splines) at least once a year, if not twice.

    --
    maestro8

    Those are my principles. If you don't like those, I have others. --
    Groucho Marx
    ------------------------------------------------------------------------
    maestro8's Profile: http://www.unicyclist.com/profile/7871
    View this thread: http://www.unicyclist.com/thread/55895

  5. I was acttualy thinking shove a cork in there. Would that work?

    Edit: Just saw Maestro's post. I actualy do maintnece on my splines
    every few months so it should be fine.

    --
    maximus unius

    Quoted message said:

    Originally Posted by *Beener*
    Is ISIS, ISIS, is ISIS not ISIS, is KOXX ISIS really ISIS, is Kris Holm
    ISIS more ISIS than KOXX ISIS, ISISISISISIS!


    ------------------------------------------------------------------------
    maximus unius's Profile: http://www.unicyclist.com/profile/13699
    View this thread: http://www.unicyclist.com/thread/55895

  6. maximus unius said:

    I was acttualy thinking shove a cork in there. Would that work?

    Remember a seal works both ways. You may think you're only keeping
    moisture out, but at the same time, you're also keeping moisture in...
    that is... any moisture that works its way into the crank will stay
    there longer with a cork than without.

    I'd say its best to leave it open and let it air dry after your rides.

    --
    maestro8

    Those are my principles. If you don't like those, I have others. --
    Groucho Marx
    ------------------------------------------------------------------------
    maestro8's Profile: http://www.unicyclist.com/profile/7871
    View this thread: http://www.unicyclist.com/thread/55895

  7. maximus unius said:

    or am I just paranoid?

    Yes

    Don't worry about it.

    My cranks have the same thing and they have been fine for a year, wet
    or dry.

    --
    smcmorrow

    \"It's knot gonna make it!\" -threeinchtire
    ------------------------------------------------------------------------
    smcmorrow's Profile: http://www.unicyclist.com/profile/10881
    View this thread: http://www.unicyclist.com/thread/55895

  8. smcmorrow said:


    My cranks have the same thing and they have been fine for a year, wet
    or dry.

    Same.

    well not a year 8 months.

    --
    Monocyclist
    ------------------------------------------------------------------------
    Monocyclist's Profile: http://www.unicyclist.com/profile/13114
    View this thread: http://www.unicyclist.com/thread/55895

  9. I do admit, sometimes I am a bit paranoid about my unicycle. Funny,
    cause sometimes I throw it if im really mad:o

    --
    maximus unius

    Quoted message said:

    Originally Posted by *Beener*
    Is ISIS, ISIS, is ISIS not ISIS, is KOXX ISIS really ISIS, is Kris Holm
    ISIS more ISIS than KOXX ISIS, ISISISISISIS!


    ------------------------------------------------------------------------
    maximus unius's Profile: http://www.unicyclist.com/profile/13699
    View this thread: http://www.unicyclist.com/thread/55895

  10. lol
    mine are rusty
    i spray some oil in there every once in a while
    w/e happens happens theres no way I can stop it here... I live too
    close to the salt water
    EVERYTHING (even wood LOL) rusts

    --
    skrobo

    Quoted message said:

    <> Unicycle For Christ <><

    ____________________________________________
    -last edited by \"your mom\" at 8:35 pm -
    ------------------------------------------------------------------------
    skrobo's Profile: http://www.unicyclist.com/profile/12272
    View this thread: http://www.unicyclist.com/thread/55895

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.