Hello,
I have a pair of their Super Sphere wheels with sealed bearing hubs. I
would like to pull the freehub off to flush it and lube it but I don't
see how the sealed bearings come out.
I tried Real-Designs web site but couldn't find any technical
information at all. Have any of you figured out how to get these
apart?
BTW, this is a Shimano Ultegra 10 speed freehub. I am assuming that
after the bearings are out of the way the freehub comes off with a
10mm hex drive socket just like the older 9 speed hubs.
Thanks,
Steve