Dished rollers?

"Gary Jacobson" <[email hidden]> wrote in message
"]news:[email hidden]...
| I used to have rollers that were dished so that you would naturally tend towards being centered on
| the roller. Also by moving up the gradient
towards
| the rails you could change the resistance without shifting. They were
easier
| to use, (but perhaps not as good for training for some unknown reason to
me)
| as traditional rollers.
|
| Any of these rollers still made?
|
| Gary Jacobson Rosendale, NY
|
|

The dished rollers I recall were from the late '70s-early '80s. They were unique in that the rollers
were wood. Being a tightwad at the time, I copied the idea, and built myself a set of wood rollers.
I used a 4" hole saw to cut a bunch of 'donuts' out of 3/4' birch lumber. I cut a 3/4" bore in each
wooded disc, and laminated them together on a 3/4" steel shaft. On a lathe, I then turned a dished
profile. I spent more time building them than I did using them, as they weren't anywhere near
balanced enough to spin at riding speeds. However, they did look as though they would have made a
nice set of lamp bases.... ED3

"Gary Jacobson" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

I used to have rollers that were dished so that you would naturally tend towards being centered on
the roller. Also by moving up the gradient

towards

Quoted message said:

the rails you could change the resistance without shifting. They were

easier

Quoted message said:

to use, (but perhaps not as good for training for some unknown reason to

me)

Quoted message said:

as traditional rollers.

Any of these rollers still made?

I'm curious. Do you mean larger in the center than at the ends like a drum for a belt-drive?

--
Andrew Muzi yellowjersey.orgyellowjersey.orgOpen ↗ Open every day since 1 April 1971

I have a set, the only decal says "The Big Yankee, made in USA."

They are hourglass shaped, with non-folding gold color anodized aluminum frame. The resistance is
higher on the smaller diameter section since the rollers have higher rpms (=> higher bearing
resistance) and your tires deform more.

They are beautiful and provide a great workout - more than enough resistance.

-Bruce

"Gary Jacobson" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

I used to have rollers that were dished so that you would naturally tend towards being centered on
the roller. Also by moving up the gradient

towards

Quoted message said:

the rails you could change the resistance without shifting. They were

easier

Quoted message said:

to use, (but perhaps not as good for training for some unknown reason to

me)

Quoted message said:

as traditional rollers.

Any of these rollers still made?

Gary Jacobson Rosendale, NY

These were wood drums, and the were hourglass shaped. Narrow in the middle, wide at the rails.

"A Muzi" <[email hidden]> wrote in message "]news:[email hidden]...

Quoted message said:

"Gary Jacobson" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

I used to have rollers that were dished so that you would naturally tend towards being centered
on the roller. Also by moving up the gradient

towards

Quoted message said:

the rails you could change the resistance without shifting. They were

easier

Quoted message said:

to use, (but perhaps not as good for training for some unknown reason to

me)

Quoted message said:

as traditional rollers.

Any of these rollers still made?

I'm curious. Do you mean larger in the center than at the ends like a drum for a belt-drive?

--
Andrew Muzi yellowjersey.orgyellowjersey.orgOpen ↗ Open every day since 1 April 1971

Those are the ones I had! Love to find another set. GJ

"Bruce" <[email hidden]> wrote in message "]news:[email hidden]...

Quoted message said:

I have a set, the only decal says "The Big Yankee, made in USA."

They are hourglass shaped, with non-folding gold color anodized aluminum frame. The resistance is
higher on the smaller diameter section since the rollers have higher rpms (=> higher bearing
resistance) and your tires deform more.

They are beautiful and provide a great workout - more than enough resistance.

-Bruce

"Gary Jacobson" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

I used to have rollers that were dished so that you would naturally tend towards being centered
on the roller. Also by moving up the gradient

towards

Quoted message said:

the rails you could change the resistance without shifting. They were

easier

Quoted message said:

to use, (but perhaps not as good for training for some unknown reason to

me)

Quoted message said:

as traditional rollers.

Any of these rollers still made?

Gary Jacobson Rosendale, NY