Doing Some Modifacations

Hope this all helps

1. Pull off the cover and use a saw blade(i used a hack saw blade) or
other cutter and cut off however much foam you want. Then when you like
the way it looks put the cover back on. If you dont have a KH fusion
seat then a staple gun with come in handy for putting the old cover
back on.

2. Its mostly a matter of preference but i like my Jim C's

3. Sorry cant help ya there

4. Take it to the LBS and get them to true and tension the wheel
properly should cost ya about $30

--
trials_uni

TRIALS 4 LIFE !

Quoted message said:

<>UNICYCLING FOR MYSLELF<><

'Check Out The Newbie Guide' (http://tinyurl.com/99yez)

koebwil said:

I'm too hardcore to type. I just punch the keyboard and delete the
letters I don't want

w00t...i got reply # 60666 in MR
------------------------------------------------------------------------
trials_uni's Profile: http://www.unicyclist.com/profile/10953
View this thread: http://www.unicyclist.com/thread/50711

thanks for the advice but where could i buy jim c's

--
JUNGAUNI

Quoted message said:

<> Unicycle for Christ <><

------------------------------------------------------------------------
JUNGAUNI's Profile: http://www.unicyclist.com/profile/11801
View this thread: http://www.unicyclist.com/thread/50711

JUNGAUNI said:

thanks for the advice but where could i buy jim c's

You can buy them at Unicycle.com

--
smcmorrow

\"It's knot gonna make it! -snuffiluffigus
------------------------------------------------------------------------
smcmorrow's Profile: http://www.unicyclist.com/profile/10881
View this thread: http://www.unicyclist.com/thread/50711

yeah i kinda figured that but i live in canada and i dont like to pay
custom charges oh yeah and i got a standard seat so how do i make it
skinnyer?

--
JUNGAUNI

Quoted message said:

<> Unicycle for Christ <><

------------------------------------------------------------------------
JUNGAUNI's Profile: http://www.unicyclist.com/profile/11801
View this thread: http://www.unicyclist.com/thread/50711

Im not sure where to get Jim C's in Canada...i got mine from a BMXer
buddy of mine and he got his off Danscomp. Check your lbs and ask if
they can order them for you.

With the standard seat the mod is the same...But you have to pull the
old staples out with pliers and use a staple gun to put the cover back
on.

--
trials_uni

TRIALS 4 LIFE !

Quoted message said:

<>UNICYCLING FOR MYSLELF<><

'Check Out The Newbie Guide' (http://tinyurl.com/99yez)

koebwil said:

I'm too hardcore to type. I just punch the keyboard and delete the
letters I don't want

w00t...i got reply # 60666 in MR
------------------------------------------------------------------------
trials_uni's Profile: http://www.unicyclist.com/profile/10953
View this thread: http://www.unicyclist.com/thread/50711

JUNGAUNI said:

okay so i need help on how to do this .
1. make the kh seat skinnyer
2. what kind of pedals should i buy(i ride street)
3. touch up paint (is there some special process)
4. my wheels kinda wobaly and my spoks pop what should i do?

A electric carving knife works great on the saddle foam.
www.bedfordunicycles.ca
Scratches add uniqueness to a unicycle
Go to your local bike shop and have them retention your spokes. It
should cost about $25.

--
UNIquelyCanadian

~Cameron
Macro Photography: _www.camerondonaldson.com__

“When someone tells you there is no such thing as truth, they are
asking you not to believe them. So don’t.”
- Dr. Roger Scruton
------------------------------------------------------------------------
UNIquelyCanadian's Profile: http://www.unicyclist.com/profile/7524
View this thread: http://www.unicyclist.com/thread/50711