rec.sport.unicycling · Public discussion

dropping the right way

Started by francisco · · Last activity · 15 posts · 240 views

Thread navigation

Jump through the discussion

Go to the original post, the replies on this page, or the latest preserved contribution.

Thread details

What we know about this thread

Original section
rec.sport.unicycling
Published
31 January 2006
Last activity
1 February 2006
Original author
francisco
Posts
15
Discussion status
Public discussion
Total views
240
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–15 of 15
Posts remain in their original chronological order.

Text size
  1. I`ve been doing some trials unicycling for a couple of months now and my
    drops are growing to four/five feet. I`d really like to know if there`s
    a right way of doing high drops so the uni can suffer less as
    possibble. also, does anyone know how high the qu-ax splined can drop
    from?

    --
    francisco
    ------------------------------------------------------------------------
    francisco's Profile: http://www.unicyclist.com/profile/11493
    View this thread: http://www.unicyclist.com/thread/46576

  2. Take it easy, don't drop only to get a higher "personal best", it's only
    stupid and will hurt you as well as your unicycle..

    To spare your uni, drop seat out, land with bent legs and take the fall
    softly, roll out if possible, land with a little more force on the
    front pedal, and you will roll a bit..

    --
    lleberg

    I <3 my unicycle!
    ------------------------------------------------------------------------
    lleberg's Profile: http://www.unicyclist.com/profile/8272
    View this thread: http://www.unicyclist.com/thread/46576

  3. lleberg said:

    To spare your uni, drop seat out, land with bent legs and take the fall
    softly, roll out if possible, land with a little more force on the
    front pedal, and you will roll a bit..

    This is pretty much the bulk of what I use for trials riding. Good
    advice!

    --
    TrialsUni
    ------------------------------------------------------------------------
    TrialsUni's Profile: http://www.unicyclist.com/profile/7986
    View this thread: http://www.unicyclist.com/thread/46576

  4. lleberg said:

    To spare your uni, drop seat out, land with bent legs and take the fall
    softly, roll out if possible, land with a little more force on the
    front pedal, and you will roll a bit..

    Dropping seat out has a lot of advantages. Not the least being that it
    saves some of your softer tissue from harm too 😉 It also allows a lot
    of 'flow' in your trials lines, doing everything seat out. The Qu-ax
    can take lots of abuse, I've still managed to make the rim all oval due
    to abuse. Got a nice 48 spoke Alexrim now though. (Many thanks again to
    municycle.com).

    Edit:

    I completly agree with the "don't drop just for the drop" bit, the drop
    for me has to be a functional part of a trials line, or an ending to a
    trials line.

    --
    Erant

    Live free, prosper, and under my rule.
    ------------------------------------------------------------------------
    Erant's Profile: http://www.unicyclist.com/profile/9986
    View this thread: http://www.unicyclist.com/thread/46576

  5. I disagree, dropping seat in is easier on you and your unicycle.

    --
    TheObieOne3226

    'SWAT Gallery' (http://gallery.unicyclist.com/SWAT)
    'SWAT webpage' (singlewheeledattackteam.1hwy.com)
    'Arrow Racing' (http://www.arrowracing.com/)
    'Sixsixone' (http://www.sixsixone.com)

    \"obie is definately a trend setter, i got in to unicycling because of
    him, and came here because of him\" - kj-52

    \"try not to annoy the great obie, for he is better than us.\" - murde
    mental

    *disclaimer: the above message was not intended to offend anyone. if
    you are offended i can take no responsibility for my actions because i
    don't feel like it. also you are reading an internet newsgroup where
    not everyone will share your same views and beliefs, be able to take
    criticism and post/read threads at your own risk.*
    ------------------------------------------------------------------------
    TheObieOne3226's Profile: http://www.unicyclist.com/profile/4851
    View this thread: http://www.unicyclist.com/thread/46576

  6. TheObieOne3226 said:

    I disagree, dropping seat in is easier on you and your unicycle.

    You do not land on your saddle, that would hurt, when seat in, you
    can't bend your legs as much.
    That means the force will be applied over shorter period of time,
    meaning more tourqe the hub and cranksarms need to handle.

    --
    lleberg

    I <3 my unicycle!
    ------------------------------------------------------------------------
    lleberg's Profile: http://www.unicyclist.com/profile/8272
    View this thread: http://www.unicyclist.com/thread/46576

  7. TheObieOne3226 said:

    I disagree, dropping seat in is easier on you and your unicycle.

    Seat out is definitally easier on you, you can bend your legs really
    low, instead of having to bend over your upper body. (Especially for
    me, I have a history of back problems). I'd also say it's easier on
    your unicycle, but I can't verify this ofcourse. My instincts say you
    can spread the impact out MUCH more.

    --
    Erant

    Live free, prosper, and under my rule.
    ------------------------------------------------------------------------
    Erant's Profile: http://www.unicyclist.com/profile/9986
    View this thread: http://www.unicyclist.com/thread/46576

  8. The Obie One obviously said it for a reason. He doesnt seem like the
    chap that would not say it for a reason. But why he is keepin us
    waiting i will never no (unless he tells me)

    Mike

    --
    swarbrim

    😄 add me at [email hidden]
    ------------------------------------------------------------------------
    swarbrim's Profile: http://www.unicyclist.com/profile/11005
    View this thread: http://www.unicyclist.com/thread/46576

  9. I know i´m not the greatest dropper who can drop like 4 metres, but I
    havn´t broken a single pedal, crank,rim or hub yet.

    I do my drops like this:

    I´m standing seat out on the edge of the obstacle that I want to drop
    from.
    I crouch down as much as possible, roll my wheel out from the obstacle,
    and when in mid-air I extend my body to the fullest. At the exact
    moment when my wheel touches the ground, I start to crouch down again.
    If this is done smooth and properly you apply very little stress on
    your equipment.

    Sorry for my sucky english. I hope it´s understandable.

    --
    fexnix

    '*My fresh gallery*'
    (http://gallery.unicyclist.com/Fexnix-album)
    *I Got Infinite Skillz*
    ------------------------------------------------------------------------
    fexnix's Profile: http://www.unicyclist.com/profile/7381
    View this thread: http://www.unicyclist.com/thread/46576

  10. Okay.

    One time I was trying to do a drop off a platform, it was at least 5
    1/2 feet high, I'm thinkin 6, I suck at guessing distances. The landing
    was completly flat, and a very hard packed dirt road. I tried it seat
    in, and only banged my nuts. I'd read somewere that seat out dropping
    helps on bigger drops, so I tried that. I did waht Fexnix explains
    above, and as soon as I hit the ground the uni stopped, but my body
    kept going. My hand couldn't grip the seat hard enough and it just
    slipped as I got driven straight into the ground. Tried it 3 more
    times, same thing happened with me ending up on my stomach on top of
    the uni.

    I evuantually landed it couple times both seat in and seat out. For me,
    higher drops are easier to roll out of seat in, esp. if I jump out
    farther away from the obstacle. But I like to use seat-out for smaller
    drops, to feather my unicycle better.

    (this is on a qu-axtrials)

    --
    forrestunifreak

    I do not believe in computer programers.
    'My gallery'
    (http://www.unicyclist.com/gallery/?g2_view=core.ShowItem&g2_itemId=155664)

    "If I am ever that good I will be in a constant state of crapping my
    pants." ~ koebwil
    ------------------------------------------------------------------------
    forrestunifreak's Profile: http://www.unicyclist.com/profile/6828
    View this thread: http://www.unicyclist.com/thread/46576

  11. francisco said:

    I`d really like to know if there`s a right way of doing high drops so
    the uni can suffer less as possibble.

    Dont drop to flat. :o

    I never do drops over a few feet unless its got a nice rollout/its part
    of a really sick line/ i have alot of speed going into the drop so i
    can roll out nice and smooth. Usually, if its the
    part-of-a-really-sick-line option, and its just a static drop to flat,
    Ill do it seat out a la Erant and Fexnix.

    --
    mango

    *Neener, neener, neener. *-harper
    ------------------------------------------------------------------------
    mango's Profile: http://www.unicyclist.com/profile/3892
    View this thread: http://www.unicyclist.com/thread/46576

  12. TheObieOne3226 said:

    I disagree, dropping seat in is easier on you and your unicycle.

    seat in is much easier on your unicycle, so I would definitely choose
    it above seat out.
    seat out dropping can be easier on you, but if you have good form for
    big drops, you shouldn't feel much of a difference at all.

    --
    James_Potter

    to give anything less than your best is to sacrifice the gift.

    mikael atkinson
    mdotedotatkinsonatgmaildotcom
    President of the '_MRIS_' (http://tinyurl.com/dk2de)
    ------------------------------------------------------------------------
    James_Potter's Profile: http://www.unicyclist.com/profile/3807
    View this thread: http://www.unicyclist.com/thread/46576

  13. seat out dropping is also much harder on your knees, and unless you do
    it fairly well, will cause you to fall over even if you land the drop.
    seat in is what i use for anything over ~3 feet, i can roll out
    better/roll in better. watch yoggi drop. it's smooth, huge, and seat
    in. bend and the waist.

    --
    markf

    stuck in iowa and unemployed.
    ------------------------------------------------------------------------
    markf's Profile: http://www.unicyclist.com/profile/8102
    View this thread: http://www.unicyclist.com/thread/46576

  14. Unfortunately www.unicycle.2ya.com is still in the process of being
    transferred over, but here is a video tutorial I made summarising a
    technique for seat in dropping to flat that has served me well:

    'Dropping to Flat (high-res)' (http://tinyurl.com/bk66g)
    'Dropping to Flat (low-res)' (http://tinyurl.com/9rree)

    Good luck,
    Andrew

    --
    andrew_carter

    ...well that's what i think anyway.
    *'unicycling tips and tutorials' (http://www.unicycle.2ya.com) |
    'my photos and videos' (http://gallery.unicyclist.com/andrew) |
    '\\"dancing about architecture\\"'
    (http://www.dancingaboutarchitecture.com.au)* (coming soon...)
    ------------------------------------------------------------------------
    andrew_carter's Profile: http://www.unicyclist.com/profile/1052
    View this thread: http://www.unicyclist.com/thread/46576

  15. I still say it kills the slickness of a trials line. Ryan Atkins' lines
    in his latest movie wouldn't have been half as smooth if he stood
    hopping on top of that green thingy (Bench to green thingy) trying to
    get his seat in, then drop. And I still say that dropping seat out (If
    done properly, including rolling out(!)) will put less stress on your
    uni. Because it has both rolling out, and dispersing of impact over
    longer time. In the end, it's all down to preference (it usually comes
    down to that). I like my soft tissue right where it is, and combine
    that with my back problems and REALLY high seat, I'm going with seat
    out. And even if it does harm my unicycle more then seat in, I rarely
    do drops anyway, and my lines don't include 5 feet drops.

    --
    Erant

    Live free, prosper, and under my rule.
    ------------------------------------------------------------------------
    Erant's Profile: http://www.unicyclist.com/profile/9986
    View this thread: http://www.unicyclist.com/thread/46576

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.