Fiddly Chain Connection

Sam Salt said:

I have read one or two posts commenting on the fiddly nature of joining the two ends of a Sram
Powerlink chain and have certainly endured this myself usually when one end slips out of your
grasp and threads itself back through the rear mech.Help is evidently at hand.Glancing through the
Zyro High Performance Cycling Accessories catalogue,you know the one picked up free in LBS,there
it is on Page44.The CCH-1 Chain Holder,just a spring wire ' bridge ' that holds the chain together
letting the free ends dangle so they can be joined whilst not under tension.A simple idea,probably
a bit overpriced at £3.99 and not too hard to make one yourself I suppose.I shall certainly be
giving one the once over. Even found a picture on the Wiggle site
wiggle.co.ukproduct detail.aspOpen ↗ Perhaps everyone knows about them
except me !!!

Never knew there was such a thing 🙂 Ive always used string.

--
-Alex

----------------------------------
[email hidden] www.westerleycycling.org.uk alexpg.ath.cxcycling.phpOpen ↗
----------------------------------

I have one in my workshop toolbox. Never been used was given to me as part of a bulk tool buying
session. I haggle like a true salesman. Before I used to use a paperclip and in fact I still do.

Gadget

I use a section of an old wire coat hanger bent into a horseshoe shape, works for me!! Mark "Sam
Salt" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

I have read one or two posts commenting on the fiddly nature of joining

the

Quoted message said:

two ends of a Sram Powerlink chain and have certainly endured this myself usually when one end
slips out of your grasp and threads itself back

through

Quoted message said:

the rear mech.Help is evidently at hand.Glancing through the Zyro High Performance Cycling
Accessories catalogue,you know the one picked up free

in

Quoted message said:

LBS,there it is on Page44.The CCH-1 Chain Holder,just a spring wire '

bridge

Quoted message said:

' that holds the chain together letting the free ends dangle so they can

be

Quoted message said:

joined whilst not under tension.A simple idea,probably a bit overpriced at £3.99 and not too hard
to make one yourself I suppose.I shall certainly be giving one the once over. Even found a picture
on the Wiggle site wiggle.co.ukproduct detail.aspOpen ↗ Perhaps everyone
knows about them except me !!!

Sam Salt

---
Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (grisoft.comgrisoft.comOpen ↗).
Version: 6.0.481 / Virus Database: 277 - Release Date: 13/05/2003

"Sam Salt" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

I have read one or two posts commenting on the fiddly nature of joining

the

Quoted message said:

two ends of a Sram Powerlink chain and have certainly endured this myself usually when one end
slips out of your grasp and threads itself back

through

Quoted message said:

the rear mech.Help is evidently at hand.Glancing through the Zyro High Performance Cycling
Accessories catalogue,you know the one picked up free

in

Quoted message said:

LBS,there it is on Page44.The CCH-1 Chain Holder,just a spring wire '

bridge

Quoted message said:

' that holds the chain together letting the free ends dangle so they can

be

Quoted message said:

joined whilst not under tension.A simple idea,probably a bit overpriced at £3.99 and not too hard
to make one yourself I suppose.I shall certainly be giving one the once over. Even found a picture
on the Wiggle site wiggle.co.ukproduct detail.aspOpen ↗ Perhaps everyone
knows about them except me !!!

I have had one flip off when rejoining the chain it flew into a grass verge :o( I looked and looked,
a bloke even came out of his house and helped but to no avail. Luckily I had a chain tool and could
shorten the chain.

Sam Salt said:

I have read one or two posts commenting on the fiddly nature of joining the two ends of a Sram
Powerlink chain and have certainly endured this myself usually when one end slips out of your
grasp and threads itself back through the rear mech.Help is evidently at hand.Glancing through the
Zyro High Performance Cycling Accessories catalogue,you know the one picked up free in LBS,there
it is on Page44.The CCH-1 Chain Holder,just a spring wire ' bridge ' that holds the chain together
letting the free ends dangle so they can be joined whilst not under tension.A simple idea,probably
a bit overpriced at £3.99 and not too hard to make one yourself I suppose.I shall certainly be
giving one the once over. Even found a picture on the Wiggle site
wiggle.co.ukproduct detail.aspOpen ↗ Perhaps everyone knows about them
except me !!!

They're one of those devices I think look great when I see them in catalogues but then immediately
forget about because they're not necessary........

With derailleur gears, the secret to joining (and breaking sometimes) is to hook chain off the inner
chainring first and let it sit on bottom bracket shell. The resulting slack makes the job easy.

~PB

"Sam Salt" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

I have read one or two posts commenting on the fiddly nature of joining

the

Quoted message said:

two ends of a Sram Powerlink chain and have certainly endured this myself usually when one end
slips out of your grasp and threads itself back

through

Quoted message said:

the rear mech.Help is evidently at hand.Glancing through the Zyro High Performance Cycling
Accessories catalogue,you know the one picked up free

in

Quoted message said:

LBS,there it is on Page44.The CCH-1 Chain Holder,just a spring wire '

bridge

Quoted message said:

' that holds the chain together letting the free ends dangle so they can

be

Quoted message said:

joined whilst not under tension.A simple idea,probably a bit overpriced at £3.99 and not too hard
to make one yourself I suppose.I shall certainly be giving one the once over. Even found a picture
on the Wiggle site wiggle.co.ukproduct detail.aspOpen ↗ Perhaps everyone
knows about them except me !!!

Sam Salt

A-ha!! - this is what I could've done with last Monday at Coed Y Brennin (see previous post about
effects of removing links from chains). As it was I very patiently kept pulling the ends together,
line up rivet, start to apply pressure on chain tool - oops, chain flies apart...for a whole bloody
hour, (doncha just love greasy chains under pressure??) until NO.1 son turned up from the bottom of
the run. The third hand made all the difference, we were on our way within 5 mins of his arrival.
Think I'll add a few paperclips to the toolkit for future excursions. cheers, Dave.

Sam Salt said:

wiggle.co.ukproduct detail.aspOpen ↗ Perhaps everyone knows about them
except me !!!

Or maybe everyone else worked out that a bit of cut-off bent spoke or coat hanger does the job
perfectly well...

I have a nice stainless steel butted chain hook myself :-D

Guy
===
** WARNING ** This posting may contain traces of irony. chapmancentral.comchapmancentral.comOpen ↗ (BT ADSL and
dynamic DNS permitting)
NOTE: BT Openworld have now blocked port 25 (without notice), so old mail addresses may no longer
work. Apologies.

Quoted message said:

Quoted message said:

' that holds the chain together letting the free ends dangle so they can

be

Quoted message said:

joined whilst not under tension.A simple idea,probably a bit overpriced

at

Quoted message said:

Quoted message said:

£3.99 and not too hard to make one yourself I suppose.I shall

I am surprised to hear this since surely when joining the ends of the chain you don't need to put it
on the chainwheel so let it lie loosely while you connect, then hook it on last. It sounds as though
people put the unconnected chain under full tension of the rear mech spring , which will make it
very hard to connect.

TerryJ