Mountain Bikes · Public discussion

flat problem

Started by David L · · Last activity · 12 posts · 998 views

Thread navigation

Jump through the discussion

Go to the original post, the replies on this page, or the latest preserved contribution.

Thread details

What we know about this thread

Original section
Mountain Bikes
Published
9 February 2003
Last activity
10 February 2003
Original author
David L
Posts
12
Discussion status
Public discussion
Total views
998
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–12 of 12
Posts remain in their original chronological order.

Text size
  1. Since I put on Panaracer Fattrax 2.2 replacing the no-name 1.95's I have had two weird flats. They
    are pretty much the same flat, the Schrader valve has been ripped off or cut at the valve stem. I
    figure the rims aren't meant for such a huge tire, and there is too much room for the tube to
    float around
    in. I guess I will have to resort to the old 1.95's. Any advice or input would be appreciated,

    as always,

    Dave

  2. David L said:


    Since I put on Panaracer Fattrax 2.2 replacing the no-name 1.95's I have had two weird flats. They
    are pretty much the same flat, the Schrader valve has been ripped off or cut at the valve stem. I
    figure the rims aren't meant for such a huge tire, and there is too much room for the tube to
    float around
    in. I guess I will have to resort to the old 1.95's. Any advice or input would be appreciated,

    as always,

    Dave

    Have you ever seen how big a tube can be blown up to? <G> A 2.2 isn't THAT much bigger than a 1.95.
    I really doubt your tubes are flaoting around in the tire casing.

    I think you should take a close look at the valve hole, and clean up the sharp edge that's cutting
    the valves.

    Barry

  3. "David L" <[email hidden]> wrote in message "]news:[email hidden]...
    | Since I put on Panaracer Fattrax 2.2 replacing the no-name 1.95's I have
    had
    | two weird flats. They are pretty much the same flat, the Schrader valve
    has
    | been ripped off or cut at the valve stem. I figure the rims aren't meant
    for
    | such a huge tire, and there is too much room for the tube to float around
    | in. I guess I will have to resort to the old 1.95's. Any advice or input would be appreciated,
    |
    | as always,
    |
    | Dave
    |

    Not sure if you know this but inner tubes come in different widths too. So maybe try getting a wider
    tube so it doesnt float around as much.

    Also check the rim for sharp and abrasive sections and consider replacing or widening the rim tape.

    Simon.

  4. I never fix flat tubes. what's a puncture kit???😄:eek:
    The tube that's in flats...cut the valve off, leave the tube in as an extra barrier for the tyre. Chuck another tube in and krank it.
    It's extra protection and seriously - what puncture kit really werx??🙁
    I barely ever get flats - once in 6mths maybe....

  5. Simon said:

    Not sure if you know this but inner tubes come in different widths too. So maybe try getting a
    wider tube so it doesnt float around as much.

    I sincerely hope that was sarcams...

    (Yay, bring back sarcams!)

    --
    a.m-b FAQ: t-online.deambfaq.htm

    b.bmx FAQ: t-online.debmx faq.htm

  6. "roKeMS" <[email hidden]> wrote in message "]news:[email hidden]...

    Quoted message said:

    I never fix flat tubes. what's a puncture kit???😄:eek: The tube that's in flats...cut the valve
    off, leave the tube in as an extra barrier for the tyre. Chuck another tube in and krank it. It's
    extra protection and seriously - what puncture kit really werx??🙁 I barely ever get flats - once
    in 6mths maybe....

    Most all 'vulcanizing' patch kits work great if you know how to use 'em. The trick is letting the
    glue dry _completely_. Like 5 minutes or so. I really like the patches that come with the Park patch
    kit, good size and nice and thick. Great for DH tubes, which at $15 bucks a 'pop' I patch 'em.

    Mike

  7. bomba <[email hidden]> wrote in message "]news:[email hidden]...

    Quoted message said:
    Simon said:

    Not sure if you know this but inner tubes come in different widths too.


    So

    Quoted message said:
    Quoted message said:

    maybe try getting a wider tube so it doesnt float around as much.

    I sincerely hope that was sarcams...

    (Yay, bring back sarcams!)

    I keep getting spam about naked chicks with sarcams in their rooms......

    Shaun aRe - I also keep getting told I qualify for a $25000 grant......

  8. Michael Dart <[email hidden]> wrote in message "]news:[email hidden]...

    Quoted message said:


    "roKeMS" <[email hidden]> wrote in message "]news:[email hidden]...

    Quoted message said:

    I never fix flat tubes. what's a puncture kit???😄:eek: The tube that's in flats...cut the valve
    off, leave the tube in as an extra barrier for the tyre. Chuck another tube in and krank it.
    It's extra protection and seriously - what puncture kit really werx??🙁 I barely ever get flats
    - once in 6mths maybe....

    Most all 'vulcanizing' patch kits work great if you know how to use 'em. The trick is letting the
    glue dry _completely_. Like 5 minutes or so. I really like the patches that come with the Park
    patch kit, good size and nice and thick. Great for DH tubes, which at $15 bucks a 'pop' I patch


    'em.

    I get maybe 1 in 25 patches fail to stick, and I only give the glue 1 minute maximum to dry, even in
    the cold - I just slap the glue on, rub it like mad with a clean finger to spread it, stop rubbing
    when it starts to go really tacky, give it a few seconds, and slap the patch on, squeeze and stretch
    it like hell, dust it, put tube back etc. and inflate - no probs.

    Shaun aRe - I hardly ever get punctures on the BASE - score more points for bigfatheuge tyres.

  9. Shaun Rimmer said:

    Shaun aRe - I hardly ever get punctures on the BASE - score more points for bigfatheuge tyres.

    Never had a puncture with my Bonty Revolts, and they've been on there for well over a year now.
    Points for the skinny tyres 😉

    If Septics put tires on their bikes, do they also tipe messages?

    --
    a.m-b FAQ: t-online.deambfaq.htm

    b.bmx FAQ: t-online.debmx faq.htm

  10. bomba <[email hidden]> wrote in message "]news:[email hidden]...

    Quoted message said:
    Shaun Rimmer said:

    Shaun aRe - I hardly ever get punctures on the BASE - score more points


    for

    Quoted message said:
    Quoted message said:

    bigfatheuge tyres.

    Never had a puncture with my Bonty Revolts, and they've been on there for well over a year now.

    At 11 to 18 psi?

    Quoted message said:

    Points for the skinny tyres 😉

    Heh ',;~P```````

    Quoted message said:

    If Septics put tires on their bikes, do they also tipe messages?

    You dropped an 'r' from 'tripe'.

    Shaun aRe - P.s. <the absolute truth this is> - I had a disturbing dream last night - GT and JD were
    in it (as if that wasn't enough.....), they were very 'cosy', and both insisted on parading around
    naked, which is how I noticed JD had a hole where his [censored] should be. Thing was, it looked like a
    deep (circular) wound, rather than a vagina. Also, he was very skinny, but when he turned around,
    half (lengthwise) of the back of his body was foam padding, as used in theatre to make a thin person
    look fat. When I woke up, I didn't know wheter to scream, laugh, cry, or take copious amounts of
    extremely strong medication......<the absolute truth this is>

    (I _swear_ that ain't a lie).

  11. Shaun Rimmer said:
    Quoted message said:

    Never had a puncture with my Bonty Revolts, and they've been on there for well over a year now.

    At 11 to 18 psi?

    God no. Why on earth would I want to run tyres at that pressure - it'd be like riding in treacle.
    50-60psi for me.

    Quoted message said:

    Shaun aRe - P.s. <the absolute truth this is> - I had a disturbing dream last night - GT and JD
    were in it (as if that wasn't enough.....), they were very 'cosy', and both insisted on parading
    around naked, which is how I noticed JD had a hole where his [censored] should be. Thing was, it looked
    like a deep (circular) wound, rather than a vagina. Also, he was very skinny, but when he turned
    around, half (lengthwise) of the back of his body was foam padding, as used in theatre to make a
    thin person look fat. When I woke up, I didn't know wheter to scream, laugh, cry, or take copious
    amounts of extremely strong medication......<the absolute truth this is>

    (I _swear_ that ain't a lie).

    Well, I know I'm not going to sleep soundly this evening...

    --
    a.m-b FAQ: t-online.deambfaq.htm

    b.bmx FAQ: t-online.debmx faq.htm

  12. bomba <[email hidden]> wrote in message "]news:[email hidden]...

    Quoted message said:
    Shaun Rimmer said:
    Quoted message said:

    Never had a puncture with my Bonty Revolts, and they've been on there for well over a year now.

    At 11 to 18 psi?

    God no. Why on earth would I want to run tyres at that pressure

    Steep, wet and muddy, smooth rocky climbs/descents is one of my reasons. Plus, because there is some
    substance to my tyres, they ain't as squirmy as mildly knobby roadie tyres.

    Quoted message said:

    - it'd be like riding in treacle. 50-60psi for me.

    Aye, but you got a fat [censored] to support ',;~}

    Quoted message said:
    Quoted message said:

    Shaun aRe - P.s. <the absolute truth this is> - I had a disturbing dream last night - GT and JD
    were in it (as if that wasn't enough.....), they


    were

    Quoted message said:
    Quoted message said:

    very 'cosy', and both insisted on parading around naked, which is how I noticed JD had a hole
    where his [censored] should be. Thing was, it looked


    like a

    Quoted message said:
    Quoted message said:

    deep (circular) wound, rather than a vagina. Also, he was very skinny,


    but

    Quoted message said:
    Quoted message said:

    when he turned around, half (lengthwise) of the back of his body was


    foam

    Quoted message said:
    Quoted message said:

    padding, as used in theatre to make a thin person look fat. When I woke


    up,

    Quoted message said:
    Quoted message said:

    I didn't know wheter to scream, laugh, cry, or take copious amounts of extremely strong
    medication......<the absolute truth this is>

    (I _swear_ that ain't a lie).

    Well, I know I'm not going to sleep soundly this evening...

    Not sure I want to sleep ever again........

    Shaun aRe

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.