Flitedeck Question - Gear Tooth Indicator - Need Assistance

Ok I think I have it figured out. It does show gear indicator in mode 2 BUT not when the Cadence is
on top (large display). In the other modes when cadence in on the bottom (small display) the gear
indicator works.

Why they managed to make it this way is beyond me. When I am using cadence mode I want to see
cadence displayed in the large window.

"George" <[email hidden]> wrote in message "]news:[email hidden]...

Quoted message said:

Ok I think I have it figured out. It does show gear indicator in mode 2 BUT not when the Cadence
is on top (large display). In the other modes when cadence in on the bottom (small display) the
gear indicator works.

Why they managed to make it this way is beyond me. When I am using cadence mode I want to see
cadence displayed in the large window.

I have two flightdecks and on both of them the gear indicator displays after a shift when I have
cadence on top in the large display.

On Thu, 24 Apr 2003 04:02:43 GMT, "Gary Mishler"

How recent are your Flitedecks?

I can say with almost absolute certainty that I do not see gear number displays when I shift and
have cadence as the large number.

Mine is a week old. SC 6501. Could they have changed them? Or is is possibly a setup issue?
Everything else works fine.

Quoted message said:

I have two flightdecks and on both of them the gear indicator displays after a shift when I have
cadence on top in the large display.

"George" <[email hidden]> wrote in message "]news:[email hidden]...

Quoted message said:

On Thu, 24 Apr 2003 04:02:43 GMT, "Gary Mishler"

How recent are your Flitedecks?

I can say with almost absolute certainty that I do not see gear number displays when I shift and
have cadence as the large number.

Mine is a week old. SC 6501. Could they have changed them? Or is is possibly a setup issue?
Everything else works fine.

Quoted message said:

I have two flightdecks and on both of them the gear indicator displays

after

Quoted message said:

Quoted message said:

a shift when I have cadence on top in the large display.

One of mine is a 4 yr old 6500 and the other is a new 6501.

I looked in my 6501 manual and on page 9 it says the gear indicator will not appear if the sensor
wire is not connected. But, that wouldn't answer the question if you get it in some displays and not
others. On page 13 it says that the gear is displayed for two seconds when a shift is made, then it
returns to the original screen - which is what both of mine do. On the Troubleshooting page it says
if the data displays incorrectly you should press the All Clear button and reprogram the computer.

It's a given that you should get the gear indication when cadence is displayed. I would "reboot" the
computer by doing the ALL CLEAR and reprogramming to start over. Then, if that doesn't solve it I
would take it back and get a different one because something is definitely wrong.

Mish

I did the all clear when I was programming the unit. Everything works fine except for the gear tooth
combination showing for 2 seconds when Cadence is the large number on top.

I would hate to take back a unit that is performing properly.

Anyone else have one of these to tell me how their's works?

"George" <[email hidden]> wrote in message "]news:[email hidden]...

Quoted message said:

I did the all clear when I was programming the unit. Everything works fine except for the gear
tooth combination showing for 2 seconds when Cadence is the large number on top.

I would hate to take back a unit that is performing properly.

Anyone else have one of these to tell me how their's works?

Ooops, I mis-understood what you were asking. I was thinking you meant the Gear Indicator bar, not
the numerical gear teeth display.

Nope, that doesn't work with the large cadence display. Sorry about that.

George said:

I did the all clear when I was programming the unit. Everything works fine except for the gear
tooth combination showing for 2 seconds when Cadence is the large number on top.

I would hate to take back a unit that is performing properly.

Anyone else have one of these to tell me how their's works?

I have a 6501 on an Ultegra setup and it has the same quirk, no numerical display of cogs when
cadence is on the main display.

--
Perre

You have to be smarter than a robot to reply.