Floor pump prices

super cheap auto are selling a 2 HP 240V compressor for $99, "if you buy any
air tool". If that includes there "air tool kit" for $45.99, then for $145
you get the compressor, 5m hose,spray gun, blower, degreasing gun and a tyre
inflating gun. BUT this would max out about 120psi. if you want more they
have a 12V one(like matthew is talking about) that is good for 160psi, with
hose and tyre inflator for $97(alot more portable to)
sorry l couldn't be any help on the floor pumps

Rs said:

Would anyone know where the best deals on floor pumps can be got? Bike
shops sell them for $60-$90. Kmart sells them, but I'm not sure of
their quality.

I'd just go to your local bike shop and buy one. Having correctly
inflated tyres will pay the price of the pump off in a year or two with
reduced flats.

Apart from bike shops, I doubt whether the average person needs a
compressor for the once a week pumping up of their tyres. Sounds like an
unneccessary expense to me.

--

Quoted message said:

--------------------------<

Posted via cyclingforums.com
http://www.cyclingforums.com

RS said:

Would anyone know where the best deals on floor pumps can be got?
Bike shops sell them for $60-$90. Kmart sells them, but I'm not sure
of their quality.

I have a Serfas Airbones, its got both schrader and presta heads on it,
and it was pretty cheap, say less than $60? Perhaps try and dig one of
these up, mine seems to be lasting *fine*, but its only a year or so
old.

till

super cheap auto have a 12v one good for 120psi for $6.99
no guage though

"g" <[email hidden]> wrote in message
news:[email hidden]...

Quoted message said:

People who have Silica pumps are usually the last pump they buy, 17 to
20 years service. Only needs the little $2 washer replace every few
years. Lets face it, thats how stuff is supposed to last, brilliant.
Last looked they were $69. I'm getting one when my Taiwanese one

finally

Quoted message said:

[censored] itself.

Yepperz.. SILCA floor pumps all the way!
I paid about $60 for mine and I wouldn't touch
a compressor or frame pump if the Silca was
handy.

HTH
hippy

"RS" <[email hidden]> wrote in message
news:[email hidden]...
: Would anyone know where the best deals on floor pumps can be got?
: Bike shops sell them for $60-$90. Kmart sells them, but I'm not sure
: of their quality.
:
:

Buy the bike shop one. The good floor pumps are fantastic. Dont worry
about compressors. Its effortless to pump up to 120-150 with a good floor
pump. If its too much of an effort to pump up this with a good floor pump
then I suggest it would be too much effort to ride a bike at all.

cheers
Pete

"RS" <[email hidden]> wrote in message
news:[email hidden]...

Quoted message said:

Would anyone know where the best deals on floor pumps can be got?
Bike shops sell them for $60-$90. Kmart sells them, but I'm not sure
of their quality.

I have a Silca which I have used for about 12 years but those Kmart foot
pumps for about $12 to $14 can't be beat for tyres up to 90psi (after that
the hoses tend to blow off the pump). They are handy to have lying about the
car port/shed for the kid's bikes etc whereas the Silca cost me about $50 so
I tend to look after it more.

C

Shabby <[email hidden]> wrote in message news:<3f1f2270
[snip]

Quoted message said:

Apart from bike shops, I doubt whether the average person needs a
compressor for the once a week pumping up of their tyres. Sounds like an
unneccessary expense to me.

You only pump yoour tyres once a week ?

I do it every time I ride, I like to know what pressure my tyres are at.

RMan

Rickster said:

Shabby <[email hidden]> wrote in message
news:<3f1f2270 [snip]

Quoted message said:

Apart from bike shops, I doubt whether the average person needs a
compressor for the once a week pumping up of their tyres. Sounds like
an unneccessary expense to me.

You only pump yoour tyres once a week ?
I do it every time I ride, I like to know what pressure my tyres are at.
RMan

Every time you ride sounds a bit obsessive compulsive to me.

For me: Training bike once a week (on average), race bike - every time I
ride it, track bike - every time I ride it. There's enough other things
to do related to cycling without throwing extra pumping in as well
(washing clothes, cleaning bike, charging lights etc.).

The tyres don't go down that much during a week, probably down from
120psi to 100psi by the end of the week if you use good tubes. For
training, that's enough for me to avoid flats, which is the main aim for
the training bike.

--

Quoted message said:

--------------------------<

Posted via cyclingforums.com
http://www.cyclingforums.com

I'm with RMan.
must admit I pump my tires up every time I ride (ok occasionally I dont do
the front!), not obsessive compulsive just making sure the tyres havent gone
down on me and causing more hassles during a ride (especially if I commute
to work). You'd be surprised how much some tubes lose over a period of
time...valve extensions are worse for this too if you have deep section
rims.
each to their own though I s'pose!

"rickster" <[email hidden]> wrote in message
news:[email hidden]...

Quoted message said:

Shabby <[email hidden]> wrote in message news:<3f1f2270
[snip]

Quoted message said:

Apart from bike shops, I doubt whether the average person needs a
compressor for the once a week pumping up of their tyres. Sounds like an
unneccessary expense to me.

You only pump yoour tyres once a week ?

I do it every time I ride, I like to know what pressure my tyres are at.

RMan

Bought a Silca pump from Fitzroy Cycles, and am very happy with it. It even
pumped a car type to 30lbs.
It must have mozzed me because I got a flat tyre going homewards. Luckily I was
only 500m from home.

RS said:

Would anyone know where the best deals on floor pumps can be got?
Bike shops sell them for $60-$90. Kmart sells them, but I'm not sure
of their quality.

Quoted message said:

How well your tyres hold air depends on the kinds of valves you
have. Schraeder valves don't hold air well over 80lbs and will
require frequent topping up if you're running at 100 lbs.

Don't know abt tire valves Theo, but the Schrader valve on my
shock holds 200+psi for months without loss, so I doubt it's the
valve type that's the real problem. Valve quality, perhaps?

"RS" wrote

Quoted message said:

Bought a Silca pump from Fitzroy Cycles, and am very happy with it. It

even

Quoted message said:

pumped a car type to 30lbs.

Have 11 cu ft compressor at home.

:-)

Theo

"Glen F" wrote

Quoted message said:

Don't know abt tire valves Theo, but the Schrader valve on my
shock holds 200+psi for months without loss, so I doubt it's the
valve type that's the real problem. Valve quality, perhaps?

There are always exceptions. They are.... exceptions. Let me say most
Schrader valves then.

Schraders seal with air pressure. Prestas seal by screw.

Theo

"Glen F" wrote

Quoted message said:

Don't know abt tire valves Theo, but the Schrader valve on my
shock holds 200+psi for months without loss, so I doubt it's the
valve type that's the real problem. Valve quality, perhaps?

Thought about this again. I don't have shocks on any of my treadlies
and am not familiar with them. The shocks on my motorcycle have
Schrader valves and take 10-15 lbs in the front, 20-25 in the back.
Why does your shock need that much pressure and how do you pump them
up. My commercial 11 cu ft V-twin compressor is good for only about
140 lbs, garage pumps would be struggling to deliver 100 at the hose
end. Few air-hoses can handle that kind of pressure and that would be
one hell of a hand-pump. I doubt there's much difference in quality in
Schrader valves. The whole valve and seat assembly screws out and can
be replaced with another for about 20 cents.

???

Theo

"Theo Bekkers" <[email hidden]> wrote in message
news:[email hidden]...

Quoted message said:

"Glen F" wrote

Quoted message said:

Don't know abt tire valves Theo, but the Schrader valve on my
shock holds 200+psi for months without loss, so I doubt it's the
valve type that's the real problem. Valve quality, perhaps?

Thought about this again. I don't have shocks on any of my treadlies
and am not familiar with them. The shocks on my motorcycle have
Schrader valves and take 10-15 lbs in the front, 20-25 in the back.
Why does your shock need that much pressure and how do you pump them
up. My commercial 11 cu ft V-twin compressor is good for only about
140 lbs, garage pumps would be struggling to deliver 100 at the hose
end. Few air-hoses can handle that kind of pressure and that would be
one hell of a hand-pump. I doubt there's much difference in quality in
Schrader valves. The whole valve and seat assembly screws out and can
be replaced with another for about 20 cents.

Rear shocks on MTBs typically work at high mechanical advantage, hence
they need to run high pressure - I run mine at ~220psi. Yes, a special
pump is required, one with a very narrow barrel so that it doesn't need
much force to operate. The schrader valve used appears (externally) to
be very well made. I presume it uses a special insert.