UK and Europe · Public discussion

Fully inflating tyres on a Brompton

Started by Helen · · Last activity · 12 posts · 1,065 views

Thread navigation

Jump through the discussion

Go to the original post, the replies on this page, or the latest preserved contribution.

Thread details

What we know about this thread

Original section
UK and Europe
Published
24 November 2004
Last activity
27 November 2004
Original author
Helen
Posts
12
Discussion status
Public discussion
Total views
1,065
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–12 of 12
Posts remain in their original chronological order.

Text size
  1. Hi all

    I recently got a new Brompton T3, which I was very happy with until
    yesterday when I took my track pump to it for the first time and
    inflated the tyres to 100psi, the recommended max pressure on the side
    of the tyre (these are standard Brompton tyres). Only then I kept
    getting a strange rubbing sound when I rode, couldn't figure it out
    until I got home and found the rear tyre was rubbing against the frame,
    and there was quite clearly some wear on the tyre where this had been
    happening.

    I've reduced the pressure for now so it no longer rubs, but I'm just
    wondering if anybody else had experienced this problem. Brompton
    owners, what pressure do you inflate to? Surely it should be OK with
    the pressure recommended on the tyres that it came with! I've had a T3
    before which never had this problem.

    Cheers!
    Helen

  2. Helen said:

    I've reduced the pressure for now so it no longer rubs, but I'm just
    wondering if anybody else had experienced this problem. Brompton
    owners, what pressure do you inflate to? Surely it should be OK with
    the pressure recommended on the tyres that it came with! I've had a T3
    before which never had this problem.

    I use 100 psi. I've got Marathons rather than the Brompton tyres, but
    my L3 owning pal uses the Brom tyres at full pressure with no problems
    and the Marathons are, if anything, slightly chunkier.

    Sounds to me like there's a problem either with the wheel or the mount
    (could be skewed, or the frame itself might be). I'd remove the rear
    wheel, check it's true, reseat the tyre and then replace the wheel,
    checking it's fully into the dropouts. If the problem persists then
    back to the dealer.

    Pete.
    --
    Peter Clinch Medical Physics IT Officer
    Tel 44 1382 660111 ext. 33637 Univ. of Dundee, Ninewells Hospital
    Fax 44 1382 640177 Dundee DD1 9SY Scotland UK
    net [email hidden] http://www.dundee.ac.uk/~pjclinch/

  3. "Helen" <[email hidden]> wrote in message
    news:[email hidden]...

    Quoted message said:

    Hi all

    I recently got a new Brompton T3, which I was very happy with until
    yesterday when I took my track pump to it for the first time and
    inflated the tyres to 100psi, the recommended max pressure on the side
    of the tyre (these are standard Brompton tyres). Only then I kept
    getting a strange rubbing sound when I rode, couldn't figure it out
    until I got home and found the rear tyre was rubbing against the frame,
    and there was quite clearly some wear on the tyre where this had been
    happening.

    I've reduced the pressure for now so it no longer rubs, but I'm just
    wondering if anybody else had experienced this problem. Brompton
    owners, what pressure do you inflate to? Surely it should be OK with
    the pressure recommended on the tyres that it came with! I've had a T3
    before which never had this problem.

    Cheers!
    Helen

    According to the Brompton owners manual the recommended pressures for these
    tyre are 60-80 psi for the front and 70-90 psi for the rear,the maximum
    pressure is 100 psi so you should be OK with a bit less pressure.Having said
    that they should be able to take 100 psi without any problem.As it is a new
    bike I would take it back to the shop and have them look at it,perhaps the
    wheel isn't central in the frame.My wifes Brommy takes 100 psi with no
    problem,admittedly on Schwalbe tyres but I can't see that making all that
    much difference.

    Incidentally I would alter your e-mail address if you don't want to be
    deluged with spam.

    Hope this helps,

    Sam Salt

  4. In my own experience this is caused by the tyre not fully fitted into the
    rim. Try removing the air, re seating the tyre and starting again.
    Best regards,
    John
    PS New pictures taken on my ride today
    http://www.pbase.com/john28july/inbox

    Enjoy!

    --
    http://www.pbase.com/john28july

    "Helen" <[email hidden]> wrote in message
    news:[email hidden]...

    Quoted message said:

    Hi all

    I recently got a new Brompton T3, which I was very happy with until
    yesterday when I took my track pump to it for the first time and
    inflated the tyres to 100psi, the recommended max pressure on the side
    of the tyre (these are standard Brompton tyres). Only then I kept
    getting a strange rubbing sound when I rode, couldn't figure it out
    until I got home and found the rear tyre was rubbing against the frame,
    and there was quite clearly some wear on the tyre where this had been
    happening.

    I've reduced the pressure for now so it no longer rubs, but I'm just
    wondering if anybody else had experienced this problem. Brompton
    owners, what pressure do you inflate to? Surely it should be OK with
    the pressure recommended on the tyres that it came with! I've had a T3
    before which never had this problem.

    Cheers!
    Helen

  5. Another group member said:

    PS New pictures taken on my ride today
    http://www.pbase.com/john28july/inbox

    Enjoy!

    Those pictures of your bicycle all have distracting backgrounds.

    Was your bike /really/ the only thing worth photographing on yor ride
    today? You should come over to Hampshire. We've got lots of scenery.

  6. "Al C-F" <[email hidden]> wrote in
    message news:[email hidden]...

    Quoted message said:
    Another group member said:

    PS New pictures taken on my ride today
    http://www.pbase.com/john28july/inbox

    Enjoy!

    Those pictures of your bicycle all have distracting backgrounds.

    Was your bike /really/ the only thing worth photographing on yor ride
    today? You should come over to Hampshire. We've got lots of scenery.

    Plenty of scenery in the Severn Vale where he was! Looks like Berkeley
    Church to me, and Jenner museum also in same location. Lots of scenery in
    the area, the Cotswold escarpment on one side, the Forest of Dean on the
    other, and the river Severn running through it.

    A Railman

  7. Hello Hants!
    I came to where I live not so long ago. Where from? Guess!
    Dorset border with Hampshire.In fact only this small section of family live
    here, the rest are in Poole and Romsey-so-I do actually know most of the
    scenery your area.
    John.

    --
    http://www.pbase.com/john28july

    "Al C-F" <[email hidden]> wrote in
    message news:[email hidden]...

    Quoted message said:
    Another group member said:

    PS New pictures taken on my ride today
    http://www.pbase.com/john28july/inbox

    Enjoy!

    Those pictures of your bicycle all have distracting backgrounds.

    Was your bike /really/ the only thing worth photographing on yor ride
    today? You should come over to Hampshire. We've got lots of scenery.

  8. A Railman said:
    Quoted message said:

    Was your bike /really/ the only thing worth photographing on yor ride
    today? You should come over to Hampshire. We've got lots of scenery.

    Plenty of scenery in the Severn Vale where he was! Looks like Berkeley
    Church to me, and Jenner museum also in same location. Lots of scenery in
    the area, the Cotswold escarpment on one side, the Forest of Dean on the
    other, and the river Severn running through it.

    Evidently still not as beautiful as a bike though.

  9. Al C-F said:

    Those pictures of your bicycle all have distracting backgrounds.

    "And here's Ethel standing in front of the Taj Mahal, look, you can
    just see it behind her head..."

    Guy
    --
    May contain traces of irony. Contents liable to settle after posting.
    http://www.chapmancentral.co.uk

    88% of helmet statistics are made up, 65% of them at Washington University

  10. Now if I had just showed pictures of scenery with no bike, the fallout from
    this group would have been beyond belief!
    John-Trying to please those who want not to be pleased.............

    --

    http://www.pbase.com/john28july

    "Al C-F" <[email hidden]> wrote in
    message news:[email hidden]...

    Quoted message said:
    A Railman said:
    Quoted message said:

    Was your bike /really/ the only thing worth photographing on yor ride
    today? You should come over to Hampshire. We've got lots of scenery.

    Plenty of scenery in the Severn Vale where he was! Looks like Berkeley
    Church to me, and Jenner museum also in same location. Lots of scenery in
    the area, the Cotswold escarpment on one side, the Forest of Dean on the
    other, and the river Severn running through it.

    Evidently still not as beautiful as a bike though.

  11. Another group member said:

    Now if I had just showed pictures of scenery with no bike, the fallout from
    this group would have been beyond belief!
    John-Trying to please those who want not to be pleased.............

    Please don't top-post.

  12. On Sat, 27 Nov 2004 14:53:40 +0000, Al C-F
    <[email hidden]> wrote in message
    <[email hidden]>:

    Quoted message said:
    Quoted message said:

    John-Trying to please those who want not to be pleased.............


    Please don't top-post.

    Cloff!

    Guy
    --
    May contain traces of irony. Contents liable to settle after posting.
    http://www.chapmancentral.co.uk

    88% of helmet statistics are made up, 65% of them at Washington University

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.