9202 said:This afternoon, got home from work, filled the tubies on my TT bike, and took my Garmin Edge 305 off charge for a nice after work stress relieving ride.
To my dismay, the Garmin was DOA, dead as a door nail, non functional, kaput! I plugged it back in and it won't even recognize the charger, the charging unit message is not there, the screen is blank and unit will not turn on.
I have owned the Edge 305 for 2 months. The cadence/speed sensor eats batteries every 2-3 weeks, the unit intermittently turns off during rides, and occassionally after charging all night would only last of 5-10 minutes.
Nice unit, but the quality control and reliability suck!
I am sending the unit back for repair.....
In the meantime, I will be searching for something more reliable with HRM and Cadence.
I am VERY diasppointed.
I've dealt with all these issues. Garmin tech support is great. I will tell you what they usually tell me:
Here is the last email I got and should take care of your isssues:
Thank you for contacting Garmin International,
I would suggest updating or reinstalling the software on your unit. This
almost always solves battery problems. Here are the instructions:
1. Please go to the WebUpdater webpage by clicking on the following
link:
www8.garmin.comcollection.jspOpen ↗
2. You will see a link labeled Download, please click on it.
3. You will be asked if you want to Run or Save the file, please click
Run.
4. After the file downloads, you may receive a security warning; if you
do, please click Run.
5. Please select your setup language and click Next (the following
instructions are based on the English selection).
6. You will see a new window; please click Next.
7. A license agreement will appear; please agree to the terms and then
click Next.
8. You will see the destination folder, please click Next.
9. Click Install; the WebUpdater installation will begin.
10. After the installation, please ensure that there is a checkmark next
to Yes, I want to launch WebUpdater now and then click Finish.
11. The WebUpdater program will launch - again, please ensure that your
unit is connected to the computer and turned on.
12. Click Next; you will then be prompted to select your GPS.
13. A new window will appear with information about the update for your
unit, please click Next.
14. A new license agreement will appear, please click that you agree and
then click Next.
15. The unit's internal operating system/software (sometimes called
"firmware"😉 will then be updated.
16. Once the download is complete, please click Finish. The unit is now
updated and ready to use.
If you are still experiencing battery problems, I would then suggest
resetting the unit. Be advised, this may erase all of your user data.
To do so, with the unit powered off, press and hold MODE + POWER until
you receive a screen that reads, "Do you really want to erase all user
data? Yes/No." Select YES and proceed through the startup menus.
With Best Regards,
Damon A
Product Support Specialist
2nd Shift Outdoor/Fitness Team
Garmin International
913-397-8200
800-800-1020
913-397-8282 (fax) Att: Damon A
www.garmin.com