Identifying a cycle computer

Rodders said:

Can anyone identify this cycle computer and where I would
get instructions from. This is the exact same computer
that I have on my bike (bought it second hand) but have no
instructions for it. The only markings on it is "computer
club". I tried googling this but didn't have much luck.

cgi.ebay.co.ukeBayISAPI.dllOpen ↗
143&item=367851 9507&rd=1

I remember seeing that one in a Cycling Plus review and on
the shelves at Wilkinson's. I'll try and find out the make
& model if no-one else helps first. I think the brand just
is "Club".

What instructions do you need? Note that wheel settings
aren't specific to the computer.

~PB

"Pete Biggs" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

Rodders said:

Can anyone identify this cycle computer and where I
would get instructions from. This is the exact same
computer that I have on my bike (bought it second hand)
but have no instructions for it. The only markings on it
is "computer club". I tried googling this but didn't
have much luck.

cgi.ebay.co.ukeBayISAPI.dllOpen ↗
16143&item=367851 9507&rd=1

I remember seeing that one in a Cycling Plus review and on
the shelves at Wilkinson's. I'll try and find out the make
& model if no-one else helps first. I think the brand just
is "Club".

What instructions do you need? Note that wheel settings
aren't specific to the computer.

~PB

Hi Pete, I would like to make sure that the setting for the
wheel size is correct. Can you expand on what you mean by
"wheel settings aren't specific to the computer." Also there
are a couple of screens that I am not sure of what is being
displayed.

Rory

Rodders said:

Hi Pete, I would like to make sure that the setting for
the wheel size is correct. Can you expand on what you mean
by "wheel settings aren't specific to the computer."

Wheel setting for nearly all modern computers is the tyre
circumference in mm or cm, not some special code. I mean you
don't need the instructions to your sepecific computer to
get this information. Just get it from another manual or the
internet (eg. www.sheldonbrown.com), or measure by riding
forwards one wheel revolution.

Quoted message said:

Also there are a couple of screens that I am not sure of
what is being displayed.

Any clues? Any words or abbreviations that are displayed
with the numbers?

~PB

"Pete Biggs" <[email hidden]>typed

Quoted message said:

Rodders said:

Hi Pete, I would like to make sure that the setting for
the wheel size is correct. Can you expand on what you
mean by "wheel settings aren't specific to the
computer."

Quoted message said:

Wheel setting for nearly all modern computers is the tyre
circumference in mm or cm, not some special code. I mean
you don't need the instructions to your sepecific computer
to get this information. Just get it from another manual
or the internet (eg. www.sheldonbrown.com), or measure by
riding forwards one wheel revolution.

Quoted message said:

Quoted message said:

Also there are a couple of screens that I am not sure of
what is being displayed.

Quoted message said:

Any clues? Any words or abbreviations that are displayed
with the numbers?

Quoted message said:

~PB

Removing and replacing the battery will probably reset the
computer to its factory defaults. The time will probably
read '12:00'. Many computers have a default wheel size
setting for a 26" MTB, which will probably read something
like 204(0) representing the circumference in
cm/mm.

ODO means total distance registered by computer.

--
Helen D. Vecht: [email hidden] Edgware.

"Pete Biggs" <[email hidden]>typed

Quoted message said:

Rodders said:

Hi Pete, I would like to make sure that the setting for
the wheel size is correct. Can you expand on what you
mean by "wheel settings aren't specific to the
computer."

Quoted message said:

Wheel setting for nearly all modern computers is the tyre
circumference in mm or cm, not some special code. I mean
you don't need the instructions to your sepecific computer
to get this information. Just get it from another manual
or the internet (eg. www.sheldonbrown.com), or measure by
riding forwards one wheel revolution.

Quoted message said:

Quoted message said:

Also there are a couple of screens that I am not sure of
what is being displayed.

Quoted message said:

Any clues? Any words or abbreviations that are displayed
with the numbers?

Quoted message said:

~PB

Removing and replacing the battery will probably reset the
computer to its factory defaults. The time will probably
read '12:00'. Many computers have a default wheel size
setting for a 26" MTB, which will probably read something
like 204(0) representing the circumference in
cm/mm.

ODO means total distance registered by computer.

--
Helen D. Vecht: [email hidden] Edgware.

"Helen Deborah Vecht" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

"Pete Biggs" <[email hidden]>typed

Quoted message said:

Rodders said:

Hi Pete, I would like to make sure that the setting
for the wheel size is correct. Can you expand on what
you mean by "wheel settings aren't specific to the
computer."

Quoted message said:

Wheel setting for nearly all modern computers is the
tyre circumference

in

Quoted message said:

Quoted message said:

mm or cm, not some special code. I mean you don't need
the instructions to your sepecific computer to get this
information. Just get it from another manual or the
internet (eg. www.sheldonbrown.com), or measure by
riding forwards one wheel revolution.

Quoted message said:

Quoted message said:

Also there are a couple of screens that I am not sure
of what is being displayed.

Quoted message said:

Any clues? Any words or abbreviations that are displayed
with the numbers?

Quoted message said:

~PB

Removing and replacing the battery will probably reset the
computer to its factory defaults. The time will probably
read '12:00'. Many computers have a default wheel size
setting for a 26" MTB, which will probably read something
like 204(0) representing the circumference in
cm/mm.

ODO means total distance registered by computer.

--
Helen D. Vecht: [email hidden] Edgware.

Thanks Helen,

I found this handy site which gives the various diameters
and circumferences of wheels

horstedkeynes.comcycleba.gifOpen ↗

Rory

"Helen Deborah Vecht" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

"Pete Biggs" <[email hidden]>typed

Quoted message said:

Rodders said:

Hi Pete, I would like to make sure that the setting
for the wheel size is correct. Can you expand on what
you mean by "wheel settings aren't specific to the
computer."

Quoted message said:

Wheel setting for nearly all modern computers is the
tyre circumference

in

Quoted message said:

Quoted message said:

mm or cm, not some special code. I mean you don't need
the instructions to your sepecific computer to get this
information. Just get it from another manual or the
internet (eg. www.sheldonbrown.com), or measure by
riding forwards one wheel revolution.

Quoted message said:

Quoted message said:

Also there are a couple of screens that I am not sure
of what is being displayed.

Quoted message said:

Any clues? Any words or abbreviations that are displayed
with the numbers?

Quoted message said:

~PB

Removing and replacing the battery will probably reset the
computer to its factory defaults. The time will probably
read '12:00'. Many computers have a default wheel size
setting for a 26" MTB, which will probably read something
like 204(0) representing the circumference in
cm/mm.

ODO means total distance registered by computer.

--
Helen D. Vecht: [email hidden] Edgware.

Thanks Helen,

I found this handy site which gives the various diameters
and circumferences of wheels

horstedkeynes.comcycleba.gifOpen ↗

Rory

Rodders said:

Can anyone identify this cycle computer and where I would
get instructions from. This is the exact same computer
that I have on my bike (bought it second hand) but have no
instructions for it. The only markings on it is "computer
club". I tried googling this but didn't have much luck.

cgi.ebay.co.ukeBayISAPI.dllOpen ↗
143&item=367851 9507&rd=1

It was reviewed in April 2001 Cycling Plus magazine (rating:
8/10). Just called "Club". Distributor is Crabtree, tel:
01535 640000.

~PB

Rodders said:

Can anyone identify this cycle computer and where I would
get instructions from. This is the exact same computer
that I have on my bike (bought it second hand) but have no
instructions for it. The only markings on it is "computer
club". I tried googling this but didn't have much luck.

cgi.ebay.co.ukeBayISAPI.dllOpen ↗
143&item=367851 9507&rd=1

It was reviewed in April 2001 Cycling Plus magazine (rating:
8/10). Just called "Club". Distributor is Crabtree, tel:
01535 640000.

~PB