Learning to pirouette

Thanks I'll Try It🙂

--
surfer1024

My movie😄 😄

------------------------------------------------------------------------
surfer1024's Profile: http://www.unicyclist.com/profile/13733
View this thread: http://www.unicyclist.com/thread/58413

johnfoss said:

Move the couch. 😄

So far what you're doing is spinning. You haven't really hit the center
yet. To improve spinning it helps to try to hold a certain size of
circle and continue pedaling. This will teach you how to even things
out while maintaining the spin.

For the pirouette, you have to ride into the center of your spin and
stop pedaling, without falling down or having to ride out backwards.
That's why polishing the spin is helpful. Try to pedal into the center
and stop with your feet at or near horizontal. At the same time, when
you hit the center pull your arms in to help you spin faster. Keep your
arms out when working on a spin of constant speed, as it'll keep you
from going too fast.

Thanks for the video! Having something to look at can help us provide
you with specific information based on what we saw. Don't make the next
video until you've spent at least a few hours on the above, and
probably other advice below this.

Looks like he actually got to the pirouette in his last attempt, for a
couple of half revolutions, and then road forwards for a couple of
crank revs out of the last one.

--
skilewis74
------------------------------------------------------------------------
skilewis74's Profile: http://www.unicyclist.com/profile/12404
View this thread: http://www.unicyclist.com/thread/58413

skilewis74 said:

Looks like he actually got to the pirouette in his last attempt, for a
couple of half revolutions, and then road forwards for a couple of
crank revs out of the last one.

Yes, he's pretty close. But to not go at least once around hardly
counts as a pirouette. For the official IUF/Skill level version, you
have to make 3 revolutions at the center, without pedaling.

--
johnfoss

John Foss
"jfoss" at "unicycling.com" -- www.unicycling.com
-----------------------------------------------

"pretty much every trail that we've done on the California or Moab Muni
weekends is an XC trail." -- Kris Holm, on XC from a North Shore point
of view
------------------------------------------------------------------------
johnfoss's Profile: http://www.unicyclist.com/profile/832
View this thread: http://www.unicyclist.com/thread/58413

johnfoss said:

For the official IUF/Skill level version, you have to make 3 revolutions
at the center, without pedaling.

Oh. Is that the same for spins?

--
skilewis74
------------------------------------------------------------------------
skilewis74's Profile: http://www.unicyclist.com/profile/12404
View this thread: http://www.unicyclist.com/thread/58413

johnfoss said:

Yes, he's pretty close. But to not go at least once around hardly counts
as a pirouette. For the official IUF/Skill level version, you have to
make 3 revolutions at the center, without pedaling.

Heres a New one a made tonight. This one isn't edited at all. I got
three times around at 37 seconds on the vid

--
surfer1024

My movie😄 😄

------------------------------------------------------------------------
surfer1024's Profile: http://www.unicyclist.com/profile/13733
View this thread: http://www.unicyclist.com/thread/58413

surfer1024 said:

Heres a New one a made tonight. This one isn't edited at all. I got
three times around at 37 seconds on the vid

Comes up as a reapeat post.🙁

--
skilewis74
------------------------------------------------------------------------
skilewis74's Profile: http://www.unicyclist.com/profile/12404
View this thread: http://www.unicyclist.com/thread/58413

How well can you do a proper spin? And can you hold that spin for 5 or
more revolutions? A proper spin would be tight and your body at the
center point of the spin. A proper spin is also centered over the same
point for every revolution (the spin should not wander).

From the videos it looks like you are doing tight circles rather than
actual spins before entering the pirouette. There is a difference
between tight circles and a proper spin.

If you can't do proper polished spins you should work on the spins
before working on pirouettes. Here's some info on 'spins'
(http://www.unicycling.org/unicycling/skills/spin.html).

--
john_childs

john_childs (att) hotmail (dott) com
Team Never Wash Your Muni
Gallery: http://gallery.unicyclist.com/john_childs
'Unicycling Bookmark List' (http://backcountry.unicyclist.com/) ::
'World Clock' (http://tinyurl.com/a99y3)
------------------------------------------------------------------------
john_childs's Profile: http://www.unicyclist.com/profile/449
View this thread: http://www.unicyclist.com/thread/58413

surfer1024 said:

I got three times around at 37 seconds on the vid

Looks like 2 revolutions to me...

--
Spencer Hochberg

'BC wheel movie.'
(http://www.unicyclist.com/forums/showthread.php?t=56195) Watch
it.
'Bedford Unicycles' (http://BedfordUnicycles.ca)
AIM: SpencerHochberg
Email: Litldude2 (at) aol (dot) com

Im messing with it again!!!
------------------------------------------------------------------------
Spencer Hochberg's Profile: http://www.unicyclist.com/profile/12659
View this thread: http://www.unicyclist.com/thread/58413

skilewis74 said:

Oh. Is that the same for spins?

Yes. The rulebook is online. Standard Skills List starts on page 42.

surfer1024 said:

I got three times around at 37 seconds on the vid

After watching it over and over, I counted about one and a quarter
revolutions. The pirouette doesn't start until the wheel is rotating on
one spot, and ends when you start pedaling again. Based on those
requirements, three revolutions is a lot! But you're doing great. As JC
said, being able to lock in that spin and hold it without hitting the
center will help you control where you're going.

--
johnfoss

John Foss
"jfoss" at "unicycling.com" -- www.unicycling.com
-----------------------------------------------

"pretty much every trail that we've done on the California or Moab Muni
weekends is an XC trail." -- Kris Holm, on XC from a North Shore point
of view
------------------------------------------------------------------------
johnfoss's Profile: http://www.unicyclist.com/profile/832
View this thread: http://www.unicyclist.com/thread/58413

OK, Thanks guys I'll keep practicing. 🙂

--
surfer1024

My movie😄 😄

------------------------------------------------------------------------
surfer1024's Profile: http://www.unicyclist.com/profile/13733
View this thread: http://www.unicyclist.com/thread/58413