Little Van Child Trailer Tyres

in message <[email hidden]>, Danny Colyer

(') said:

Tim Steele said:

Also, any suggestions for a suitable replacement? I was thinking
maybe Schwalbe. But cheap is good ;-)

Cheap BMX tyres would probably do the job quite adequately. And you
can
find them an a variety of snazzy colours :-)

Hmmm! What standard are BMX wheels? Are they 406? Can you stick a
Stelvio on one?

--
[email hidden] (Simon Brooke) http://www.jasmine.org.uk/~simon/
Copyright (c) Simon Brooke; All rights reserved. Permission is
granted to transfer this message via UUCP or NNTP and to store it
for the purpose of archiving or further transfer. Permission is
explicitly denied to use this message as part of a 'Web Forum', or
to transfer it by HTTP.

In article <[email hidden]>, Simon

Brooke said:

Quoted message said:

Cheap BMX tyres would probably do the job quite adequately. And
you can find them an a variety of snazzy colours :-)

Quoted message said:

Hmmm! What standard are BMX wheels? Are they 406? Can you stick a
Stelvio on one?

Normally 20x1.75 front and 20x2.125 rear.

With the resurgence in BMXing they should be easily available.

--
A T (Sandy) Morton
on the Bicycle Island
In the Global Village
http://www.millport.net

Simon Brooke wondered:

Quoted message said:

Hmmm! What standard are BMX wheels? Are they 406? Can you stick a
Stelvio on one?

I've used a Marathon in the past on my 20" unicycle wheel, which usually
takes a cheap BMX tyre. It's currently fitted with a 47-406 (20" x
1.75"😉 cheap BMX tyre.

(The Marathon's a great tyre on a bike, but it's hopeless for unicycle
hockey).

--
Danny Colyer (the UK company has been laughed out of my reply address)
<URL:http://www.speedy5.freeserve.co.uk/danny/>
"He who dares not offend cannot be honest." - Thomas Paine

On Sun, 22 May 2005 22:13:53 GMT, "Tim Steele"
<[email hidden]> wrote in message
<[email hidden]>:

Quoted message said:

They're 20" x 1.75"

You need to find out if they are 406 or 451 - both are readily
available from All Good Sith Temples (e.g. Bikefix in London) as long
as you know what actual size.

406 is marginally more likely, I think, as that is the BMX size, yes?
However, the fact rtemains that a shop which sells recumbents will
probably stock both.

Guy
--
http://www.chapmancentral.co.uk

"To every complex problem there is a solution which is
simple, neat and wrong" - HL Mencken

in message <[email hidden]>, Sandy Morton

(') said:

In article <[email hidden]>, Simon

Brooke said:

Quoted message said:

Cheap BMX tyres would probably do the job quite adequately. And
you can find them an a variety of snazzy colours :-)

Quoted message said:

Hmmm! What standard are BMX wheels? Are they 406? Can you stick a
Stelvio on one?

Normally 20x1.75 front and 20x2.125 rear.

A little reading (AASHTA) determined that BMX wheels /are/ 406, and that
406 Stelvios are available. So a BMX fork probably will form at least
the Mk 1 fork for the wooden bike. I'm still a bit concerned about rake
and trail, but doubtless I'll work it out.

--
[email hidden] (Simon Brooke) http://www.jasmine.org.uk/~simon/
;; First they came for the asylum seekers,
;; and I did not speak out because I was not an asylum seeker.
;; Then they came for the gypsies,
;; and I did not speak out because I was not a gypsy...
;; Pastor Martin Niemöller, translated by Michael Howard.

Just zis Guy said:

On Sun, 22 May 2005 22:13:53 GMT, "Tim Steele"
<[email hidden]> wrote in message
<[email hidden]>:

Quoted message said:

They're 20" x 1.75"

You need to find out if they are 406 or 451 - both are readily
available from All Good Sith Temples (e.g. Bikefix in London) as long
as you know what actual size.

406 is marginally more likely, I think, as that is the BMX size, yes?

And the usual 20" childs bike size, and more likely to be labelled
1.75" rather than 1 3/4". (In fact 451 generally seems to be 1 1/8 or 1 3/8.)

The tyres are marked SUPER EAST Made in Taiwan 47-406 (20 x 1.75) INFLATE TO
40 PSI

On Tue, 24 May 2005 15:04:10 GMT, "Tim Steele"
<[email hidden]> wrote in message
<[email hidden]>:

Quoted message said:

The tyres are marked SUPER EAST Made in Taiwan 47-406 (20 x 1.75) INFLATE TO
40 PSI

OK. Your bike shop can work with that data. You probably want
something robust which pumps up to a decent pressure to keep the
rolling resistance down.

A set of, say, Schwalbe Marathon 406 (20x1.75) and pump them up
reasonably firmly, say 60psi. They should last a good long time and
be reasonably puncture resistant. Not the cheapest, but very good
tyres.

http://www.biketrax.co.uk/products.php?plid=m2b53s122p165

(completely at random from Google, for illustrative purposes only).

Alternatively ask your bike shop if they can order some in for you. I
think that Conti do the Top Touring in 406 as well, that's another
good tyre.

I'd avoid the no-name brands, you want something with decent puncture
resistance. But that's just my opinion.

Guy
--
http://www.chapmancentral.co.uk

"To every complex problem there is a solution which is
simple, neat and wrong" - HL Mencken

Just zis Guy said:

OK. Your bike shop can work with that data. You probably want
something robust which pumps up to a decent pressure to keep the
rolling resistance down.

A set of, say, Schwalbe Marathon 406 (20x1.75) and pump them up
reasonably firmly, say 60psi.

Generally speaking I like Schwalbe but I don't see the point of having tyres
pumped up hard on the trailer. The tyres provide the only suspension really
for the kids so softer tyres are in order I think.

Tim

Tim Steele said:

Generally speaking I like Schwalbe but I don't see the point of having tyres
pumped up hard on the trailer. The tyres provide the only suspension really
for the kids so softer tyres are in order I think.

For me, 60psi /is/ low pressure :-)

Guy
--
May contain traces of irony. Contents liable to settle after posting.
http://www.chapmancentral.co.uk

88% of helmet statistics are made up, 65% of them at CHS, Puget Sound

A visit to the estimable University Cycles in Cambridge sorted me out. I'm
now the proud owner of two Duro tyres which have a central rib so run
smoothly on the road although they aren't completely slick.

Cheers

Tim