Locking skewers

I've got the kryptonites. I ended up taking them off my mountain bike, because:
1) I couldn't find an appropriate collar to take the seatpost lock, only the same QR one it came
with (very strange size)
2) Taking wheels off is still a bit of a hassle, especially if I have to dig into my bag
for the "key"
3) I don't lock my bike up anywhere other than a pretty secure bike room with a big Kryptonite NY
lock and a nice thick cable.

However, whenever I build up a bike to ride around campus with, or take shopping or whatever, those
locks are going on in a second. I'm sure you could pick them if you really tried, but it'd be a
[censored] and a half, and as long as your bike is in a fairly obvious place, nobody is going to mess
with them. Make sure you bring a normal lock too though!

Jon Bond

Steve Braun said:

I looking for feedback on each of these locking skewer sets:

Kryptonite Locking skewer set
kryptonitelock.comPublicArticleDetaiOpen ↗
ls@public?artid=3032&atf=products_item&pgrp=20

Pitlock pitlock.comindex.htmlOpen ↗

Thanks

Steve Tucson

-----= Posted via Newsfeeds.Com, Uncensored Usenet News =----- newsfeeds.comnewsfeeds.comOpen ↗ - The #1
Newsgroup Service in the World! -----== Over 80,000 Newsgroups - 16 Different Servers! =-----

Quoted message said:

From: "Steve Braun"

Quoted message said:

I looking for feedback on each of these locking skewer(s)...

At the past Chicago Bike Show a small, independent manufacturer offered a skewer whose lever could
be removed after closing. One lever opened and closed a matched skewer pair. The lever could stay on
one of the skewers or be removed if the bike was left unattended. Unfortunately, I don't recall the
company's name but a skewered web search may find it.

Sig Chicago

"Scic" wrote

Quoted message said:

At the past Chicago Bike Show a small, independent manufacturer offered a skewer whose lever could
be removed after closing. One lever opened and closed a matched skewer pair. The lever could stay

on one

Quoted message said:

of the skewers or be removed if the bike was left unattended. Unfortunately, I don't recall the
company's name but a skewered web search

may

Quoted message said:

find it.

They're called the Quick Lock, made by Veratomic. There's more information at
www.myquicklock.com . I'm planning to buy a set for myself, sounds more convenient than the nut
and bolt type locking skewers.

George

Steve Braun said:

I looking for feedback on each of these locking skewer sets:

Kryptonite Locking skewer set kryptonitelock.comPublicArtiOpen ↗
cleDetails@public?artid=3032&atf=products_item&pgrp=20

Pitlock pitlock.comindex.htmlOpen ↗

neither one of these is a new idea... If I had to pick between the two I would choose Kryptonite
simply because of their history...

however for the last 15 years I've been pretty happy with 79 cent hose clamps on my
commuter bike ...

any lock can be broken with the right tools the key is to be a harder target than that bike just
over there

"Steve Braun" <[email hidden]> wrote in message news:<[email hidden]>...

Quoted message said:

I looking for feedback on each of these locking skewer sets:

Kryptonite Locking skewer set
kryptonitelock.comPublicArticleDetaiOpen ↗
ls@public?artid=3032&atf=products_item&pgrp=20

Pitlock pitlock.comindex.htmlOpen ↗

I have the Pitlock and like it. Pitlock sells replacement parts and you can get additional skewers
keyed the same way (so that you can use one key on several bikes). I wrote to Kryptonite to see if
they could do the same and never got a reply. The Pitlock key is smaller than the Kryptonite one,
but you'll need to put it on a big keyring or use a hex key if you want to get the right torque. I
think Sheldon Brown has warned that neither system should be used with horizontal dropouts (since I
always lock my rear wheel I don't use a Pitlock skewer there). I can tighten the front wheel
sufficiently with a keyring, but I have to use a hex key (which passes through two holes in the
Pitlock key) to tighten the seatpost enough.

One other benefit of Pitlock is that they make keyed bolts for brakes and headsets. (I haven't
used those.)