Looking for compact crankset in 165mm

Bontrager lists their Race Lite crank in 165mm at the top of this page:
http://www.bontrager.com/Road/Components/Cranks/5806.php

I have the Bontrager Race Lite compact crank (only mine's 170mm) and
it's been great so far.

Duc Loi said:

Who makes them? Only one I found at Harris bike was a Bulletproof BMX
crankset.

thanks

Duc Loi said:

Who makes them? Only one I found at Harris bike was a Bulletproof BMX
crankset.

Sugino XD cranks (XD300 and/or XD600) come in 165mm lengths. Get one,
ditch the inner chainring, and replace the middle and outer chainrings
with whatever size you like. As they use 110mm BC chainrings, you can
go as low as 34 tooth for the second chainring. Either can be found at
Aebike or Harris Cyclery, or probably order from your friendly LBS. I
just converted an ancestor of this crank on a mid-80's bike from being
a 52/42 to a 50/34 for my wife and am very happpy with the result.

Later,
Mark Muller

I'll second the XD. They come in a wide range of sizes--I have an
XD/n00 on my bike with 48-36-26 rings and 175mm arms, and found one for
my 11-yo son's bike in 46-36-26, 165mm arms. It's nice to get a good
fit...

-----BEGIN PGP SIGNED MESSAGE-----

In article <[email hidden]>,

Duc Loi said:

Who makes them? Only one I found at Harris bike was a Bulletproof BMX
crankset.

_ Stronglight and TA also make them ( I think Harris has the
stronglight on their website ).

http://www.xxcycle.com/cgi-bin/shop.pl?SCREEN=detail&REF=2835

http://www.peterwhitecycles.com/carmina.asp

You can also by a "track" version of the Sugino XD

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=56195&item=7163234894&rd=1

which is just the triple with a slight modification.

_ Booker C. Bense

-----BEGIN PGP SIGNATURE-----
Version: 2.6.2

iQCVAwUBQrmhyGTWTAjn5N/lAQF3AgQAp4Ks357MWpqqpLgOeolf4O1YAq/AsojQ
w+bo4yIkQ1C+XEPuIs9WgL5GLrN0ij2xLhyunagleqD0feZlftGzzEqZnKmvFPdJ
Yy89OH+KRtoG6T65PUx33FsGpGaN+FHYVBrGYhM12KM1v8aw5LcNGRTrsESAmOvA
CXgBiL5DF2g=
=FolL
-----END PGP SIGNATURE-----

Quoted message said:

Duc Loi said:

Who makes them? Only one I found at Harris bike was a Bulletproof BMX
crankset.

Sugino XD cranks (XD300 and/or XD600) come in 165mm lengths. Get one,
ditch the inner chainring, and replace the middle and outer chainrings
with whatever size you like. As they use 110mm BC chainrings, you can
go as low as 34 tooth for the second chainring. Either can be found at
Aebike or Harris Cyclery, or probably order from your friendly LBS. I
just converted an ancestor of this crank on a mid-80's bike from being
a 52/42 to a 50/34 for my wife and am very happpy with the result.

Later,
Mark Muller

Thanks for the suggestion. If I go with the triple crank but with just
two chainrings, do I need to get a shorter bb spindle?

-----BEGIN PGP SIGNED MESSAGE-----

In article <[email hidden]>,

Duc Loi said:

Quoted message said:

Duc Loi said:

Who makes them? Only one I found at Harris bike was a Bulletproof BMX
crankset.

Sugino XD cranks (XD300 and/or XD600) come in 165mm lengths. Get one,
ditch the inner chainring, and replace the middle and outer chainrings
with whatever size you like. As they use 110mm BC chainrings, you can
go as low as 34 tooth for the second chainring. Either can be found at
Aebike or Harris Cyclery, or probably order from your friendly LBS. I
just converted an ancestor of this crank on a mid-80's bike from being
a 52/42 to a 50/34 for my wife and am very happpy with the result.

Later,
Mark Muller

Thanks for the suggestion. If I go with the triple crank but with just
two chainrings, do I need to get a shorter bb spindle?

_ You don't NEED to, but you might WANT to. Check out Sheldon's
articles on chainline. Generally, you need to get a wider BB
when going from double to triple to avoid clearance problems
on the inner ring. I would try it first with whatever BB you
already have and seen what the chainline looks like.

_ Booker c. Bense

-----BEGIN PGP SIGNATURE-----
Version: 2.6.2

iQCVAwUBQrnT4mTWTAjn5N/lAQGGwAQAhMo3ViPiLYdct9eMuvyu/eT80zI3voKn
fqv6j2Lvf5JL0JGOm+ictFDzi+1hYg7kqGd/Pb4qxoncOpusNL+BhN+w0VGdfGM2
VGntVZvYCBAg7RGir0XYQ55zg/SLGljxX7HIHnIgwQco6uOiSiXBVrqHfLltcbbV
XAQGxVViPo0=
=0Zdg
-----END PGP SIGNATURE-----

SJS Cycles has their own 110BCD Thorn brand in lengths down to 140mm. TA
also make 110BCD cranks in a good variety of lengths.

Nick

"Duc Loi" <[email hidden]> wrote in message
news:[email hidden]...

Quoted message said:

Who makes them? Only one I found at Harris bike was a Bulletproof BMX
crankset.

thanks