Making a slick from a Try All Sticky

Use a cuter to cut all the nobs off.
Then sand whats left of the nobs away with a sander.
Denk effe na he Marne😉

PM

--
Probailer2

john_childs said:

Mmmmm... Sexy welds.

musketman said:

Kris Holm owns death

abbabibble said:

cody bent his koxx.

he was working it pretty hard.

------------------------------------------------------------------------
Probailer2's Profile: http://www.unicyclist.com/profile/11034
View this thread: http://www.unicyclist.com/thread/53999

Probailer2 said:

Use a cuter to cut all the nobs off.
Then sand whats left of the nobs away with a sander.
Denk effe na he Marne😉

PM

I've already tried that but the rubber is really not easy to cut it.
it seems very easy but it isn't

|k heb al de noppe aan de zijkant er al af geknipt met n tang maar k
krijg de middelsten ni weg|

--
bailingmarne

😄 1 wheel, 1000 ways to ride it😄
------------------------------------------------------------------------
bailingmarne's Profile: http://www.unicyclist.com/profile/12717
View this thread: http://www.unicyclist.com/thread/53999

try a belt sander. I think spencer did that? (correct me if I'm wrong)

--
Radical Reed

"I'm sorta like a super hero, exsept I don't have any powers or
motivation"
'sixsixone' (http://www.sixsixone.com/)
'LBS' (http://www.mbps.ca/)

kapoute said:

bike always broke... it's gay
Since you live in Ontario... it's ok that it's gay

------------------------------------------------------------------------
Radical Reed's Profile: http://www.unicyclist.com/profile/10427
View this thread: http://www.unicyclist.com/thread/53999

just do a bunch of burnouts and it will become smooth

--
Blegas78
------------------------------------------------------------------------
Blegas78's Profile: http://www.unicyclist.com/profile/5293
View this thread: http://www.unicyclist.com/thread/53999

Radical Reed said:

try a belt sander. I think spencer did that? (correct me if I'm wrong)

Yeah, Evan and I did it with a luna so a try all should be very easy.

It looked something like this...
[image:
http://www.nealmoser.com/images/Delta%204%20in%20belt%20sander.jpg]

--
Spencer Hochberg

(disclaimer: i may not know what i am talking about)

maxisback said:

yeh i kill ppl for a living

'Gallery.unicyclist.com/spencer'
(http://Gallery.unicyclist.com/spencer)
AIM: Litldude2
Email: Litldude2 (att) aol (dott) com
'Bedford Unicycles' (http://BedfordUnicycles.ca)
------------------------------------------------------------------------
Spencer Hochberg's Profile: http://www.unicyclist.com/profile/12659
View this thread: http://www.unicyclist.com/thread/53999

Spencer Hochberg said:

Yeah, Evan and I did it with a luna so a try all should be very easy.

It looked something like this...
[image:
http://www.nealmoser.com/images/Delta%204%20in%20belt%20sander.jpg]

that is one hardcore belt sander you got there

--
skrobo

-stephen-

Quoted message said:

<>Unicycle For Christ<>< PM me if you want to know...

vuniw said:

i dont do myspace because i dont want to get raped by a weirdo.. so i
put my information on unicyclist.com🙂

-last edited by forrestunifreak, jjtheunicycle, and ducttape : today at
10:37 pm.-
------------------------------------------------------------------------
skrobo's Profile: http://www.unicyclist.com/profile/12272
View this thread: http://www.unicyclist.com/thread/53999

skrobo said:

that is one hardcore belt sander you got there

I just found that picture with google. The one we used looked kinda
like that.

--
Spencer Hochberg

(disclaimer: i may not know what i am talking about)

maxisback said:

yeh i kill ppl for a living

'Gallery.unicyclist.com/spencer'
(http://Gallery.unicyclist.com/spencer)
AIM: Litldude2
Email: Litldude2 (att) aol (dott) com
'Bedford Unicycles' (http://BedfordUnicycles.ca)
------------------------------------------------------------------------
Spencer Hochberg's Profile: http://www.unicyclist.com/profile/12659
View this thread: http://www.unicyclist.com/thread/53999

Hey Spencer, how was the shaved luna? I'm thinking about doing that to
my luna and getting a sticky for trials but if there is absolutely no
difference then I won't bother.

--
ntappin

'how to build a strong comfy saddle from junk.'
(http://tinyurl.com/hxcb3)
------------------------------------------------------------------------
ntappin's Profile: http://www.unicyclist.com/profile/10800
View this thread: http://www.unicyclist.com/thread/53999

The obvious question: won't a shaved tire not last very long?

--
forrestunifreak

If I had a signature, it would look something like this.
*'My gallery-NAUCC 2006!'
(http://tinyurl.com/bbf9x)*
BANANA'S FOR JESUS!
_____________________________________________
-last edited by skrobo : today at 11:41 am.-
------------------------------------------------------------------------
forrestunifreak's Profile: http://www.unicyclist.com/profile/6828
View this thread: http://www.unicyclist.com/thread/53999

forrestunifreak said:

The obvious question: won't a shaved tire not last very long?

Lunas last forever anyways.

--
ntappin

'how to build a strong comfy saddle from junk.'
(http://tinyurl.com/hxcb3)
------------------------------------------------------------------------
ntappin's Profile: http://www.unicyclist.com/profile/10800
View this thread: http://www.unicyclist.com/thread/53999

forrestunifreak said:

The obvious question: won't a shaved tire not last very long?

Yeah, we had to take so much rubber off that tire if I used it on a uni
it would wear way too fast. I have it on a bc wheel so it wears much
slower. Uni tires wear really fast in your hopping position so that
shaved tire would not last very long.
The try all rubber wears faster than the luna but because of the tread
you don't have to shave off nearly as much rubber.

--
Spencer Hochberg

(disclaimer: i may not know what i am talking about)

maxisback said:

yeh i kill ppl for a living

'Gallery.unicyclist.com/spencer'
(http://Gallery.unicyclist.com/spencer)
AIM: Litldude2
Email: Litldude2 (att) aol (dott) com
'Bedford Unicycles' (http://BedfordUnicycles.ca)
------------------------------------------------------------------------
Spencer Hochberg's Profile: http://www.unicyclist.com/profile/12659
View this thread: http://www.unicyclist.com/thread/53999

How about.....Not take 5 hours to shave a tire, which wont last very
long anyway.....And get a already slick tire and put it on a bmx rim?

--
Evan Byrne

'The future of bc wheeling is in this link.' (http://tinyurl.com/p53rj)
------------------------------------------------------------------------
Evan Byrne's Profile: http://www.unicyclist.com/profile/9367
View this thread: http://www.unicyclist.com/thread/53999

Evan Byrne said:

How about.....Not take 5 hours to shave a tire, which wont last very
long anyway.....And get a already slick tire and put it on a bmx rim?

Too bad that Hoggy-G tire only comes in 24"...

--
Borgschulze

Spare some change for a new unicycle?
------------------------------------------------------------------------
Borgschulze's Profile: http://www.unicyclist.com/profile/13501
View this thread: http://www.unicyclist.com/thread/53999

Borgschulze said:

Too bad that Hoggy-G tire only comes in 24"...

Well the Hoggy only comes in 24 but the same company makes a 20"
version, it is called the Twenty-G.
[image: http://3gbikes.com/img/components/twenty-g_tire2.gif]
http://3gbikes.com/components/twenty-g.html

--
Spencer Hochberg

(disclaimer: i may not know what i am talking about)

maxisback said:

yeh i kill ppl for a living

'Gallery.unicyclist.com/spencer'
(http://Gallery.unicyclist.com/spencer)
AIM: Litldude2
Email: Litldude2 (att) aol (dott) com
'Bedford Unicycles' (http://BedfordUnicycles.ca)
------------------------------------------------------------------------
Spencer Hochberg's Profile: http://www.unicyclist.com/profile/12659
View this thread: http://www.unicyclist.com/thread/53999

two words: end cutters. [image:
http://ec3.images-amazon.com/images/P/B000GI0JY8.01-A3AAUQE01ME5EO._SS500_SCLZZZZZZZ_V64224485_.jpg]

should be all of $7-10 at a hardware store.

//edit: cut the knobs down/off, it'll take a while but probably not as
long as all the sanding would.

--
markf

'irwinsbikes.com' (http://www.irwinsbikes.com)
------------------------------------------------------------------------
markf's Profile: http://www.unicyclist.com/profile/8102
View this thread: http://www.unicyclist.com/thread/53999