What's the deal with different length and angle noodels? What's the theory?
My bike seems to work well with a 90° noodles back and front but am I
missing out on better braking?
thanks
A community for cyclists, gear, training and racing.
Cycling Equipment · Public discussion
Thread navigation
Go to the original post, the replies on this page, or the latest preserved contribution.
Thread details
The navigation and discussion metadata provide context. Posts remain in their original chronological order.
What's the deal with different length and angle noodels? What's the theory?
My bike seems to work well with a 90° noodles back and front but am I
missing out on better braking?
thanks
Family newsgroup.
Psychlo-path said:What's the deal with different length and angle noodels? What's the theory?
My bike seems to work well with a 90° noodles back and front but am I
missing out on better braking?thanks
Use 90-degree noodles for a "normal" brake configuration with the
front brake controlled by the left lever. The 120 to 135-ish noodles
are for bikes running the front brake off of the right lever with
normal non-reversible right side pull V-brakes. This allows the cable
housing to curve into the noodle at a better angle to minimize any
kink at the ferrule on the noodle. The rear brake should always use 90-
degrees.
"Bill Sornson" <[email hidden]> wrote in message
news:[email hidden]...
Quoted message said:Family newsgroup.
I can assure you that the noodle to which you allude has very little to do
with my braking; except when endangered by oncoming obstacles. 🙂
"amakyonin" <[email hidden]> wrote in message
news:[email hidden]...
Psychlo-path said:What's the deal with different length and angle noodels? What's the
theory?
Quoted message said:My bike seems to work well with a 90° noodles back and front but am I
missing out on better braking?thanks
Quoted message said:Use 90-degree noodles for a "normal" brake configuration with the
front brake controlled by the left lever. The 120 to 135-ish noodles
are for bikes running the front brake off of the right lever with
normal non-reversible right side pull V-brakes. This allows the cable
housing to curve into the noodle at a better angle to minimize any
kink at the ferrule on the noodle. The rear brake should always use 90-
degrees.
----------------------------
Hmmm, seems that while i replaced the 120° noodle for 90°, i assumed that
the 120° noodle was intended for the back as it came coupled with the
shorted bolts, so this is not the case?
In the UK here so right lever is front as standard; again, 90° noodle on
front, so my housing is too long (given that the noodle comes in to the
caliper on the right side)??
K
Psychlo-path said:What's the deal with different length and angle noodels? What's the theory?
My bike seems to work well with a 90° noodles back and front but am I
missing out on better braking?
What's a noodle?
bfd said:Psychlo-path said:What's the deal with different length and angle noodels? What's the
theory? My bike seems to work well with a 90° noodles back and front
but am I missing out on better braking?
What's a noodle?
That silver thing that functions as the cable housing, attached to v-brake
arms. It looks like a long skinny piece of metal elbow macaroni.
--
Phil
Non-Squid said:bfd said:Psychlo-path said:What's the deal with different length and angle noodels? What's the
theory? My bike seems to work well with a 90° noodles back and front
but am I missing out on better braking?
What's a noodle?That silver thing that functions as the cable housing, attached to v-brake
arms. It looks like a long skinny piece of metal elbow macaroni.
Dear Phil & B,
http://biketoolsetc.com/index.cgi?id=24393435553&c=Repair-Parts&sc=Brake&tc=V-Brake-Noodles
Cheers,
Carl Fogel
Active in the last 60 minutes
0 users · 0 guests ·0 bots ·0 total
No signed-in users are active right now.
No known search crawlers active right now.