Cycling Equipment · Public discussion

Problems with Hac4Pro computer

Started by Hans · · Last activity · 7 posts · 387 views

Thread navigation

Jump through the discussion

Go to the original post, the replies on this page, or the latest preserved contribution.

Thread details

What we know about this thread

Original section
Cycling Equipment
Published
4 September 2006
Last activity
6 September 2006
Original author
Hans
Posts
7
Discussion status
Public discussion
Total views
387
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–7 of 7
Posts remain in their original chronological order.

Text size
  1. I bought a Hac4Pro computer/altimeter/heartmonitor.

    In every trip the max speed suddenly runs to a very high value. Last time
    148 km/h.

    I complained and got a new one.

    What happens, the new one has the same problems.

    What are your experiences with the Hac4Pro ? Anyone known with this problem
    ?
    Anyone knows a solution ?

    Thanks,

    Hans

  2. "Hans" <[email hidden]> wrote in message
    news:[email hidden]...

    Quoted message said:

    I bought a Hac4Pro computer/altimeter/heartmonitor.

    In every trip the max speed suddenly runs to a very high value. Last time
    148 km/h.

    I complained and got a new one.

    What happens, the new one has the same problems.

    What are your experiences with the Hac4Pro ? Anyone known with this


    problem

    Quoted message said:

    ?
    Anyone knows a solution ?

    Thanks,

    Hans

    Problems? Other than it is the LEAST reliable, hardest to set up and most
    expensive piece of junk computer I've ever come across (and that includes
    Trek computers, at least they have the decency to sell them for cheap).
    If it doesn't say Cateye or Polar on it, it's not worth it!

  3. Quoted message said:
    Quoted message said:

    I bought a Hac4Pro computer/altimeter/heartmonitor.

    In every trip the max speed suddenly runs to a very high value. Last time
    148 km/h.

    I complained and got a new one.

    What happens, the new one has the same problems.

    What are your experiences with the Hac4Pro ? Anyone known with this


    problem

    Quoted message said:

    ?
    Anyone knows a solution ?

    Thanks,

    Hans

    Problems? Other than it is the LEAST reliable, hardest to set up and most
    expensive piece of junk computer I've ever come across (and that includes
    Trek computers, at least they have the decency to sell them for cheap).
    If it doesn't say Cateye or Polar on it, it's not worth it!

    Er, my friend's Polar 710 has similar problems. It's fairly common to
    wireless computers in general; they're susceptible to electromagnetic
    interference from high voltage lines as well as noisy fluorescent light
    ballasts. Outdoors, the high voltage lines are the more-likely culprit.
    There's a spot on our local "loop" ride that's infamous for causing very
    high max speed readings.

    --Mike-- Chain Reaction Bicycles
    www.ChainReactionBicycles.com

  4. In article
    <[email hidden]>,

    Mike Jacoubowsky said:
    Quoted message said:
    Quoted message said:

    I bought a Hac4Pro computer/altimeter/heartmonitor.

    In every trip the max speed suddenly runs to a very high value. Last time
    148 km/h.

    I complained and got a new one.

    What happens, the new one has the same problems.

    What are your experiences with the Hac4Pro ? Anyone known with this


    problem

    Quoted message said:

    ?
    Anyone knows a solution ?

    Thanks,

    Hans

    Problems? Other than it is the LEAST reliable, hardest to set up and most
    expensive piece of junk computer I've ever come across (and that includes
    Trek computers, at least they have the decency to sell them for cheap).
    If it doesn't say Cateye or Polar on it, it's not worth it!

    Er, my friend's Polar 710 has similar problems. It's fairly common to
    wireless computers in general; they're susceptible to electromagnetic
    interference from high voltage lines as well as noisy fluorescent light
    ballasts. Outdoors, the high voltage lines are the more-likely culprit.
    There's a spot on our local "loop" ride that's infamous for causing very
    high max speed readings.

    The most common cause of anomalous readings in this area
    is a proximity detector set into the pavement.

    --
    Michael Press

  5. What frequency does the sensor use on wireless cyclocomputers? I have
    a heart rate monitor that uses 5 KHz. A common HRM chipset uses 30
    KHz. There is a lot of man-made noise at those low frequencies.

    The PDF's at www.cateye.com don't cover that type of thing. Any
    definitive answers out there? A search didn't turn up anything.
    Mostly just curious.

    Thanks,
    Jim

  6. Mike Jacoubowsky said:

    Er, my friend's Polar 710 has similar problems. It's fairly common to
    wireless computers in general; they're susceptible to electromagnetic
    interference from high voltage lines as well as noisy fluorescent light
    ballasts. Outdoors, the high voltage lines are the more-likely culprit.
    There's a spot on our local "loop" ride that's infamous for causing very
    high max speed readings.

    Interesting. I have a Polar and ride on a road for several miles
    beside some jillion-volt towers and never have that sort of problem.

    It's a CS200cad and has two wireless sending units, so you'd expect
    it to be extra susceptible.

    The only times it's misbehaved were when I first got it (the cadence
    sender was DOA due to infant mortality) and the one time I came
    across another rider with a similar model (something that could
    be avoided in the setup if we had cared to, but he's just a bent
    rider who was on the road one day; never saw him before or since).

    However, I can't recommend the unit because the GUI blows and the
    buttons are extremely hard to activate, which can interfere with
    controlling the bike and maintaining the flow of the ride. And the
    computer-link is audio-based (you hold the thing up to your
    microphone and enter the magic sequence), and it only uploads
    to their website, not to your computer. Extracting the information
    manually is slow due to the super-hard buttons, and slower because
    the GUI is, as I said, horrendous. Plus, you can't replace the
    batteries in the sending units, you have to get it done at a service
    center.

    I'd switch to the Cateye, but I got so [censored] at them waiting for them
    to finally declare the CC-TR100 vaporware that I refuse to buy from
    them
    any more.

    --Blair

  7. Yea, but Polar is actually a pretty decent company to deal with. Ciclosport
    is just insane. Why would you make a separate Imperial and Continental
    model? Why would you choose a US distributor that would mess that up way too
    often?

    "Mike Jacoubowsky" <[email hidden]> wrote in message
    news:[email hidden]...

    Quoted message said:
    Quoted message said:
    Quoted message said:

    I bought a Hac4Pro computer/altimeter/heartmonitor.

    In every trip the max speed suddenly runs to a very high value. Last


    time

    Quoted message said:
    Quoted message said:
    Quoted message said:

    148 km/h.

    I complained and got a new one.

    What happens, the new one has the same problems.

    What are your experiences with the Hac4Pro ? Anyone known with this


    problem

    Quoted message said:

    ?
    Anyone knows a solution ?

    Thanks,

    Hans

    Problems? Other than it is the LEAST reliable, hardest to set up and


    most

    Quoted message said:
    Quoted message said:

    expensive piece of junk computer I've ever come across (and that


    includes

    Quoted message said:
    Quoted message said:

    Trek computers, at least they have the decency to sell them for cheap).
    If it doesn't say Cateye or Polar on it, it's not worth it!

    Er, my friend's Polar 710 has similar problems. It's fairly common to
    wireless computers in general; they're susceptible to electromagnetic
    interference from high voltage lines as well as noisy fluorescent light
    ballasts. Outdoors, the high voltage lines are the more-likely culprit.
    There's a spot on our local "loop" ride that's infamous for causing very
    high max speed readings.

    --Mike-- Chain Reaction Bicycles
    www.ChainReactionBicycles.com

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.