Q. Help - Shimano XT Disc Brake Dual Control Front M765

[[email protected]]

I have been given XT Disc Brake Dual Control Front M765 assy (for
Christmas) its new.

When shifting I can only get 3 gears (and not the 9 ) it will return
back.

It seems to be rotated by 6 notches and only 3 clicks are available, I
can't even remove or see the gear cable end.

Is there a way to reset the ratchet so the 9 notches become
available? or is there some faulty assembly of the change mechanism?
I have looked and played with the pauls no sucess.

How is it done or where can I look for any instructions.

Thanks

Rob

 

[zog]

[email protected] wrote:
> I have been given XT Disc Brake Dual Control Front M765 assy (for
> Christmas) its new.
>
> When shifting I can only get 3 gears (and not the 9 ) it will return
> back.
>
> It seems to be rotated by 6 notches and only 3 clicks are available, I
> can't even remove or see the gear cable end.
>
> Is there a way to reset the ratchet so the 9 notches become
> available? or is there some faulty assembly of the change mechanism?
> I have looked and played with the pauls no sucess.
>
> How is it done or where can I look for any instructions.

you didn't get the instructions with it?, strange.

anyway see here
http://techdocs.shimano.com/techdocs/blevel.jsp?JSESSIONID=H0DsTD1NvzNGv1v1hk6h65ClN67m582xQg7D98ncvJYxYGX8n78g!-465023719&ASSORTMENT%3C%3East_id=1408474395181679&FOLDER%3C%3Efolder_id=2534374302051947&bmUID=1198818093159

rear drive assembly
http://techdocs.shimano.com/media/t...eSystem/SI_6JJRD_En_v1_m56577569830605056.pdf

 

[Rob.]

zog wrote:

> [email protected] wrote:
>
>> I have been given XT Disc Brake Dual Control Front M765 assy (for
>> Christmas) its new.
>>
>> When shifting I can only get 3 gears (and not the 9 ) it will return
>> back.
>>
>> It seems to be rotated by 6 notches and only 3 clicks are available, I
>> can't even remove or see the gear cable end.
>>
>> Is there a way to reset the ratchet so the 9 notches become
>> available? or is there some faulty assembly of the change mechanism?
>> I have looked and played with the pauls no sucess.
>>
>> How is it done or where can I look for any instructions.
>
>
> you didn't get the instructions with it?, strange.
>
> anyway see here
> http://techdocs.shimano.com/techdocs/blevel.jsp?JSESSIONID=H0DsTD1NvzNGv1v1hk6h65ClN67m582xQg7D98ncvJYxYGX8n78g!-465023719&ASSORTMENT%3C%3East_id=1408474395181679&FOLDER%3C%3Efolder_id=2534374302051947&bmUID=1198818093159
>
>
> rear drive assembly
> http://techdocs.shimano.com/media/t...eSystem/SI_6JJRD_En_v1_m56577569830605056.pdf
>


Thanks

Although hasn't helped much as I'm still in the same situation in which
I can't return it to zero. Stays at 6 but the pointer is at zero.

May have to phone or call in to Mr Shimano after the break.

r