replacement pins for snafus

'This' (http://www.danscomp.com/469002.php?cat=PARTS#) should do
it...you will need the phillips head ones at the bottom of the page.

--
trials_uni

TRIALS 4 LIFE !

Quoted message said:

<>UNICYCLING FOR MYSLELF<><

'Check Out The Newbie Guide' (http://tinyurl.com/99yez)

koebwil said:

I'm too hardcore to type. I just punch the keyboard and delete the
letters I don't want

w00t...i got reply # 60666 in MR
------------------------------------------------------------------------
trials_uni's Profile: http://www.unicyclist.com/profile/10953
View this thread: http://www.unicyclist.com/thread/50900

i guess you could try your local hardware store or similar, they may
have a range of different bolts there, some may suit what you're
looking for. other than that you could try ebay.

--
iridemymuni

The past is in your head, the future's in our hands

~~hold bananas for christ~~
------------------------------------------------------------------------
iridemymuni's Profile: http://www.unicyclist.com/profile/11900
View this thread: http://www.unicyclist.com/thread/50900

They have a unusual OD/thread. I tried all the parts stores in town and
no one could match the thead and size. Buying slightly bigger and
stripping them into place might work, but...

For Snafu replacement pins Bedfordunicycles.ca is one place I know of.

--
UNIquelyCanadian

~Cameron
Totally Revamped: _www.camerondonaldson.com__

“When someone tells you there is no such thing as truth, they are
asking you not to believe them. So don’t.”
- Dr. Roger Scruton
------------------------------------------------------------------------
UNIquelyCanadian's Profile: http://www.unicyclist.com/profile/7524
View this thread: http://www.unicyclist.com/thread/50900

DANSCOMP.com

you can get lik 25 for $5

that;s what I did....

--
mornish

Quoted message said:

<>UNICYCLING FOR MYSLELF TOO<><

"LX seats are as comfortable as bricks." lildude2
"CX seats are bricks."
------------------------------------------------------------------------
mornish's Profile: http://www.unicyclist.com/profile/11658
View this thread: http://www.unicyclist.com/thread/50900

if you wanted bigger pins for some reason, you could tap the thread to
make it bigger, and put some bigger pins in you got from a hardware
store. i dont know if you'd want to do that but. do you loctite your
pins in?

--
iridemymuni

The past is in your head, the future's in our hands

~~hold bananas for christ~~
------------------------------------------------------------------------
iridemymuni's Profile: http://www.unicyclist.com/profile/11900
View this thread: http://www.unicyclist.com/thread/50900

mornish said:

DANSCOMP.com

you can get lik 25 for $5

that;s what I did....

You should have read his first post...he said he already checked
danscomp and they didnt have what he needed.

--
trials_uni

TRIALS 4 LIFE !

Quoted message said:

<>UNICYCLING FOR MYSLELF<><

'Check Out The Newbie Guide' (http://tinyurl.com/99yez)

koebwil said:

I'm too hardcore to type. I just punch the keyboard and delete the
letters I don't want

w00t...i got reply # 60666 in MR
------------------------------------------------------------------------
trials_uni's Profile: http://www.unicyclist.com/profile/10953
View this thread: http://www.unicyclist.com/thread/50900

iridemymuni said:

if you wanted bigger pins for some reason, you could tap the thread to
make it bigger, and put some bigger pins in you got from a hardware
store. i dont know if you'd want to do that but. do you loctite your
pins in?

I should have, but no. I will now!😄

--
terrybigwheel

Impotence: Nature's Way Of Saying "No Hard Feelings".

Uni is just a cycle I'm going through. 😎

*My Video Gallery*: http://tinyurl.com/e6wt5
------------------------------------------------------------------------
terrybigwheel's Profile: http://www.unicyclist.com/profile/11418
View this thread: http://www.unicyclist.com/thread/50900

trials_uni said:

You should have read his first post...he said he already checked
danscomp and they didnt have what he needed.

At least that's what I could gather from the website. It *appears* that
they don't have the allen-head style that will fit snafu; I plan to
call them tomorrow to find out the specifics. It really surprises me
that the LBS's DON'T normally carry these- they seem to be a very
common replacement item. Whatever.:o

--
terrybigwheel

Impotence: Nature's Way Of Saying "No Hard Feelings".

Uni is just a cycle I'm going through. 😎

*My Video Gallery*: http://tinyurl.com/e6wt5
------------------------------------------------------------------------
terrybigwheel's Profile: http://www.unicyclist.com/profile/11418
View this thread: http://www.unicyclist.com/thread/50900

my LBS carrys them. I guess your not being lucky.

--
mornish

Quoted message said:

<>UNICYCLING FOR MYSLELF TOO<><

"LX seats are as comfortable as bricks." lildude2
"CX seats are bricks."
------------------------------------------------------------------------
mornish's Profile: http://www.unicyclist.com/profile/11658
View this thread: http://www.unicyclist.com/thread/50900

mornish said:

my LBS carrys them. I guess your not being lucky.

You're saying that they have [in stock] the actual "allen-head" type
pin, specifially to fit the snafu sealed bearing platform pedal? If so,
please give me the name of the shop and their phone number (with area
code). Thanks!

--
terrybigwheel

Impotence: Nature's Way Of Saying "No Hard Feelings".

Uni is just a cycle I'm going through. 😎

*My Video Gallery*: http://tinyurl.com/e6wt5
------------------------------------------------------------------------
terrybigwheel's Profile: http://www.unicyclist.com/profile/11418
View this thread: http://www.unicyclist.com/thread/50900

Good god man, they're only screws. Go to any industrial supply place
(www.use-enco.com www.mcmaster.com www.msc.com to name a few), and
browse through their metric fastener selection. Then, for $5, just buy
100 of whatever screw looks right. If it's wrong, but the next size up
or the next sixe down. Bike shops are not the places to buy screws,
unless you want to get screwed in the proccess.

--
gerblefranklin

http://gallery.unicyclist.com/Trials-Muni

Nick's main man.

"I love freedom dearly, ideally, in theory, but in reality we're not
there yet--Not nearly."--Cold Duck Complex
------------------------------------------------------------------------
gerblefranklin's Profile: http://www.unicyclist.com/profile/4295
View this thread: http://www.unicyclist.com/thread/50900

terrybigwheel said:

Seems none of the LBS-of which there are more than 20 in my area!-stock
replacement traction pins for bmx-type platform pedals...and several
shops didn't even know what I was referring to!

Anyway, I have snafu pedals that use the allen-type threaded pin, not
the more common phillips head pin that goes all the way in flush, with
the pin sticking out the other side. I looked at the danscomp.com.
website, but could only find the phillips head pins. I need the allen
head pin, where the allen "head" sticks out, and -is- the traction
side. Anybody know where I can get at least 5-10 of them? Thanks!😄

Won't they be one of these, either the 2 or 3 mm ones.
http://www.danscomp.com/469002.php

I think all the pedals I have use 3mm M3 grub screws, although I know
some pedals have smaller ones.

Joe

--
joemarshall

my pics http://gallery.unicyclist.com/albuq44
------------------------------------------------------------------------
joemarshall's Profile: http://www.unicyclist.com/profile/1545
View this thread: http://www.unicyclist.com/thread/50900

the silver philips screws in his link are the ones you want.

also, dude there only pins.

--
mornish

Quoted message said:

<>UNICYCLING FOR MYSLELF TOO<><

"LX seats are as comfortable as bricks." lildude2
"CX seats are bricks."
------------------------------------------------------------------------
mornish's Profile: http://www.unicyclist.com/profile/11658
View this thread: http://www.unicyclist.com/thread/50900

We sell them in the UK
http://tinyurl.com/or9lo

Roger

--
rogeratunicycledotcom

++++++++++++++++++
Unicycle.com in the UK
The UK's Unicycle Source
www.unicycle.uk.com
+++++++++++++++++++
------------------------------------------------------------------------
rogeratunicycledotcom's Profile: http://www.unicyclist.com/profile/4116
View this thread: http://www.unicyclist.com/thread/50900

mornish said:

the silver philips screws in his link are the ones you want.

also, dude there only pins.

NOPE! THe pins in MY snafs are the ALLEN head type! The phillips head
goes in "flush" and thepin sticks out the OTHER side...The pins in MY
snafs screw into the pedal, but do NOT stick out the other side- the
end that you screw in (the allen end) only goes in to the end of the
threads, the rest of it stays out and *IS* the pin/traction side.

--
terrybigwheel

Impotence: Nature's Way Of Saying "No Hard Feelings".

Uni is just a cycle I'm going through. 😎

*My Video Gallery*: http://tinyurl.com/e6wt5
------------------------------------------------------------------------
terrybigwheel's Profile: http://www.unicyclist.com/profile/11418
View this thread: http://www.unicyclist.com/thread/50900

rogeratunicycledotcom said:

We sell them in the UK
http://tinyurl.com/or9lo

Roger

Yeah, I saw those. First off, thery're in the UK! Second, there is no
picture indicating whether they will fit MYSPECIFIC pedal.

--
terrybigwheel

Impotence: Nature's Way Of Saying "No Hard Feelings".

Uni is just a cycle I'm going through. 😎

*My Video Gallery*: http://tinyurl.com/e6wt5
------------------------------------------------------------------------
terrybigwheel's Profile: http://www.unicyclist.com/profile/11418
View this thread: http://www.unicyclist.com/thread/50900

I laready gave you the freaking link!

--
mornish

Quoted message said:

<>UNICYCLING FOR MYSLELF TOO<><

"LX seats are as comfortable as bricks." lildude2
"CX seats are bricks."
------------------------------------------------------------------------
mornish's Profile: http://www.unicyclist.com/profile/11658
View this thread: http://www.unicyclist.com/thread/50900

mornish said:

I laready gave you the freaking link!

Calm down little man! You said the following: <<the silver philips
screws in his link are the ones you want.>> *I* replied that those were
NOT the correct pins. But thanks for the link. I had asked you for the
PHONE NUMBER AND ADDRESS of *YOUR* local bike shop, that you claim
carries them. 😄 😄 😄 😄

--
terrybigwheel

Impotence: Nature's Way Of Saying "No Hard Feelings".

Uni is just a cycle I'm going through. 😎

*My Video Gallery*: http://tinyurl.com/e6wt5
------------------------------------------------------------------------
terrybigwheel's Profile: http://www.unicyclist.com/profile/11418
View this thread: http://www.unicyclist.com/thread/50900

Terry, you're killing me here. Go to the mcmaster link I provided
earlier, and search "metric setscrews". Then go to town. Your pedals
are not special, exotic, or new, and neither are the screws. Snafu is
not using a proprietary thread here. The screws are 6mm long, and M3
(get the M3 and M2.5 if you really aren't sure). If you can tie your
shoes you can use that link. If not, you'd better get used to slippery
pedals.

--
gerblefranklin

http://gallery.unicyclist.com/Trials-Muni

Nick's main man.

"I love freedom dearly, ideally, in theory, but in reality we're not
there yet--Not nearly."--Cold Duck Complex
------------------------------------------------------------------------
gerblefranklin's Profile: http://www.unicyclist.com/profile/4295
View this thread: http://www.unicyclist.com/thread/50900