Cycling Equipment · Public discussion

rim liners

Started by Mark Vieselmeye · · Last activity · 13 posts · 1,019 views

Thread navigation

Jump through the discussion

Go to the original post, the replies on this page, or the latest preserved contribution.

Thread details

What we know about this thread

Original section
Cycling Equipment
Published
29 May 2003
Last activity
30 May 2003
Original author
Mark Vieselmeye
Posts
13
Discussion status
Public discussion
Total views
1,019
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–13 of 13
Posts remain in their original chronological order.

Text size
  1. Is anyone aware of any problems with plastic rim liners? I have a set of wheels with cloth tape
    liners that's frayed and bunched up, exposing some of the spoke holes, and I wanted to replace them
    with plastic liners (which I have on several other wheels with no problems). The guy at my LBS says
    they no longer carry the plastic liners because with double wall rims they get blowouts in the spoke
    holes. He also mentioned that Specialized (their main supplier) stopped making them, so maybe it's
    just that brand that had problems?

    - mark

  2. Mark Vieselmeyer said:

    Is anyone aware of any problems with plastic rim liners? I have a set of wheels with cloth tape
    liners that's frayed and bunched up, exposing some of the spoke holes, and I wanted to replace
    them with plastic liners (which I have on several other wheels with no problems). The guy at my
    LBS says they no longer carry the plastic liners because with double wall rims they get blowouts
    in the spoke holes. He also mentioned that Specialized (their main supplier) stopped making them,
    so maybe it's just that brand that had problems?

    I suppose there is some truth to those claims but not all plastic liners are alike. Michelin made a
    good one (hard and yellow) that had all the right attributes of stiffness and snug fit but with age
    it slit lengthwise. I've always used Kool-Stop strips on my Mavic MA-2 rims and had no problem. They
    last longer than the rims.

    Jobst Brandt [email hidden] Palo Alto CA

  3. I just swapped the tire on a rim with a yellow Michelin liner. The liner had distended (herniated)
    into the spoke holes, though not enough to completely rupture. I've not had that problem (or any
    other) with Velox (cloth) liners. I'll be using Velox in the future.

    Rob

    Quoted message said:
    Mark Vieselmeyer said:

    Is anyone aware of any problems with plastic rim liners? I have a set of wheels with cloth tape
    liners that's frayed and bunched up, exposing some of the spoke holes, and I wanted to replace
    them with plastic liners (which I have on several other wheels with no problems). The guy at my
    LBS says they no longer carry the plastic liners because with double wall rims they get blowouts
    in the spoke holes. He also mentioned that Specialized (their main supplier) stopped making them,
    so maybe it's just that brand that had problems?

    I suppose there is some truth to those claims but not all plastic liners are alike. Michelin made
    a good one (hard and yellow) that had all the right attributes of stiffness and snug fit but with
    age it slit lengthwise. I've always used Kool-Stop strips on my Mavic MA-2 rims and had no
    problem. They last longer than the rims.

    Jobst Brandt [email hidden] Palo Alto CA

  4. Mark Vieselmeyer said:

    Is anyone aware of any problems with plastic rim liners? I have a set of wheels with cloth tape
    liners that's frayed and bunched up, exposing some of the spoke holes, and I wanted to replace
    them with plastic liners (which I have on several other wheels with no problems). The guy at my
    LBS says they no longer carry the plastic liners because with double wall rims they get blowouts
    in the spoke holes. He also mentioned that Specialized (their main supplier) stopped making them,
    so maybe it's just that brand that had problems?


    There are some plastic rim strips that are OK, but most are not so good. The better ones are
    fiber-reinforced; the biggest problem with them is that they will, in time, crack over the spoke
    hole. This produces flats.

    I really prefer cloth. I have some that are several years old, and have been used on a number of
    rims, without fraying or bunching up. I wonder how old yours are? Maybe replacing them once a
    decade, at $3 per, is not such a bad idea.

    --

    David L. Johnson

    __o | "Business!" cried the Ghost. "Mankind was my business. The _`\(,_ | common welfare was my
    business; charity, mercy, forbearance, (_)/ (_) | and benevolence, were, all, my business. The
    dealings of my trade were but a drop of water in the comprehensive ocean of my business!"
    --Dickens, "A Christmas Carol"

  5. I've been using Schwalbe plastic Super HP Rim Tapes (schwalbetires.comaccessories.htm)
    with no problem for about 10,000 miles, which isn't really long enough to judge by, but they seem
    very sturdy. Unfortunately they're hard to get in the states any way but mail-order, so shipping
    adds to the cost unless you're buying other stuff in the same shipment. You got to be very careful
    if you don't know where you're going, because you might not get there.

    - Yogi Berra

  6. Mark Vieselmeyer said:

    The guy at my LBS says they no longer carry the plastic liners because with double wall rims they
    get blowouts in the spoke holes. He also mentioned that Specialized (their main supplier) stopped
    making them, so maybe it's just that brand that had problems?

    I had the Specialized ones on both a road and mountain bike. On both bikes, the rimstrip melted from
    the heat of braking and extruded into a spoke hole causing a flat. Prior to that, I tried Michelins
    and they split at the spoke holes. I also tried the Kool Stops and were not overly impressed with
    them either, as, over time, they had severe dimpling at the spoke holes. I switched back to Velox
    cloth tape.

    --
    Mike DeMicco <[email hidden]

  7. Why not use Velox cloth tape? It isn't a synthetic that will not decompose. If your going to ride
    you might as well use something that will not hurt the environment. If you are that terribly
    concerned about spoke-through punctures You might as well have the wheel rebuilt if you think it's
    that bad... Velox worx!!!

    NS

  8. Quoted message said:

    Why not use Velox cloth tape? It isn't a synthetic that will not decompose. If your going to ride
    you might as well use something that will not hurt the environment. If you are that terribly
    concerned about

    spoke-through punctures You might as well have the wheel rebuilt if you

    think it's that bad... Velox worx!!!

    Huh? I've used Velox tapes for years and they don't decompose. What are you smoking today?
    Phil Brown

  9. I'm talking in a compost pile. After you replace the old Velox tape after many years of riding... If
    you throw the old Velox cloth tape away it will decompose in a compost pile fast, whereas the
    plastic could last uncomposted for a thousand years or more. It's just more ecologically friendly
    than plastics or Rubber-like products.

    NS

  10. With some plastic rim strips you risk the strip melting. This happens on tandems. The plastic
    softens and you get the implosion of the tube.

    David L. Johnson said:

    There are some plastic rim strips that are OK, but most are not so good. The better ones are
    fiber-reinforced; the biggest problem with them is that they will, in time, crack over the spoke
    hole. This produces flats.

  11. Paul Kopit said:
    Quoted message said:

    There are some plastic rim strips that are OK, but most are not so good. The better ones are
    fiber-reinforced; the biggest problem with them is that they will, in time, crack over the spoke
    hole. This produces flats.

    I don't know that there are plastic strips with grains in them, only that Kool-Stop strips do not
    penetrate even with an exposed spoke tip protruding to make a bump in the strip.

    Quoted message said:

    With some plastic rim strips you risk the strip melting. This happens on tandems. The plastic
    softens and you get the implosion of the tube.

    Kool-Stop strips can take the heat, although it may cause them to conform to the things they cover.
    Since failing spokes are less of a concern these days, they once were, and lifting a plastic strip
    undamaged is an advantage over adhesive tapes that easily break. It's still good to know the plastic
    Kool-Stop will work if a spoke fails.

    Jobst Brandt [email hidden] Palo Alto CA

  12. Paul Kopit said:
    Quoted message said:

    There are some plastic rim strips that are OK, but most are not so good. The better ones are
    fiber-reinforced; the biggest problem with them is that they will, in time, crack over the spoke
    hole. This produces flats.

    I don't know that there are plastic strips with fibers in them, only that Kool-Stop strips do not
    penetrate even with an exposed spoke tip protruding to make a bump in the strip.

    Quoted message said:

    With some plastic rim strips you risk the strip melting. This happens on tandems. The plastic
    softens and you get the implosion of the tube.

    Kool-Stop strips can take the heat, although it may cause them to conform to the things they cover.
    Since failing spokes are less of a concern these days, they once were, and lifting a plastic strip
    undamaged is an advantage over adhesive tapes that easily break. It's still good to know the plastic
    Kool-Stop will work if a spoke fails.

    Jobst Brandt [email hidden] Palo Alto CA

  13. David L. Johnson wrote:

    : There are some plastic rim strips that are OK, but most are not so good. The better ones are
    : fiber-reinforced; the biggest problem with them is that they will, in time, crack over the spoke
    : hole. This produces flats.

    : I really prefer cloth. I have some that are several years old, and have been used on a number of
    : rims, without fraying or bunching up. I wonder how old yours are? Maybe replacing them once a
    : decade, at $3 per, is not such a bad idea.

    The wheels are only a few years old. The rim strips are a thin nylon fabric tape, not like the velox
    stuff. After taking a closer look, it seems the tape was too wide. The rim has a cross-section
    something like:

    | |
    |o_o|
    \_/

    The tape was getting pushed off the "o" beads. I think I'll try some narrow Velox tape that fits
    between the beads.

    As for the plastic strips, the couple places I've checked locally don't carry them. I've found a
    couple places on the web that have the Michelin ones, but I can't find any mention of the Kool
    Stop ones.

    - mark

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.