Mountain Bikes · Public discussion

Ripley's Believe It etc.

Started by Chris · · Last activity · 10 posts · 820 views

Thread navigation

Jump through the discussion

Go to the original post, the replies on this page, or the latest preserved contribution.

Thread details

What we know about this thread

Original section
Mountain Bikes
Published
23 October 2003
Last activity
23 October 2003
Original author
Chris
Posts
10
Discussion status
Public discussion
Total views
820
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–10 of 10
Posts remain in their original chronological order.

Text size
  1. If you folks have TBS (247 on directtv) put it on now...dude's trying to go 90 mph on his MTB.

    Chris

  2. "Chris" <[email hidden]> wrote in message
    "]news:[email hidden]...

    Quoted message said:

    If you folks have TBS (247 on directtv) put it on now...dude's trying to


    go

    Quoted message said:

    90 mph on his MTB.

    Chris

    Okay, it's over. Eric Barrone made it to 107 mph - then his head tube sheared off. He was on some
    kind of carbon wind-tunnel tri bike with DeeMaxs and some Euro brand suspension parts...but judging
    from the frame failure, you'd think it was a Fisher (Zing!).

    So, 5 broken ribs, dislocated shoulder, and "torn hand muscles." But he has the world record.

    He can keep it.

    Chris

  3. Quoted message said:

    Okay, it's over. Eric Barrone made it to 107 mph -

    Gearing must have been 4x larger than a roodie bike to achieve that speed.

  4. "Chris" <[email hidden]> wrote

    Quoted message said:


    Okay, it's over. Eric Barrone made it to 107 mph - then his head tube sheared off. He was on some
    kind of carbon wind-tunnel tri bike with DeeMaxs and some Euro brand suspension parts...but
    judging from the frame failure, you'd think it was a Fisher (Zing!).

    So, 5 broken ribs, dislocated shoulder, and "torn hand muscles." But he


    has

    Quoted message said:

    the world record.

    He can keep it.

    Record?

    speedski.comcarolyncurl.htm Carolyn Curl -1997 - 122 mph

    Pete

  5. "Destroy" <[email hidden]> wrote in message "]news:[email hidden]...

    Quoted message said:


    Quoted message said:

    Okay, it's over. Eric Barrone made it to 107 mph -

    Gearing must have been 4x larger than a roodie bike to achieve that speed.

    Guess I should have mentioned he wasn't pedaling. As far as I could tell, it was a FS singlespeed,
    but he only turned the cranks about three times at the very start...he was coasting down a volcano,
    something like 2,700 feet.

    Chris

  6. "Chris" <[email hidden]> wrote in message
    "]news:[email hidden]... <snip>

    Quoted message said:


    Okay, it's over. Eric Barrone made it to 107 mph - then his head tube sheared off. He was on some
    kind of carbon wind-tunnel tri bike with DeeMaxs and some Euro brand suspension parts...but
    judging from the frame failure, you'd think it was a Fisher (Zing!).

    So, 5 broken ribs, dislocated shoulder, and "torn hand muscles." But he


    has

    Quoted message said:

    the world record.

    He can keep it.

    Chris

    ~Travis could beat that ANY DAY!

    Matt

  7. Destroy said:


    Quoted message said:

    Okay, it's over. Eric Barrone made it to 107 mph -

    Gearing must have been 4x larger than a roodie bike to achieve that speed.

    If you're trying to pedal at that speed, you're going to go slower. The extra wind resistance from
    your legs flailing around will MUCH more than overcome any additional power you may be putting into
    the pedals. When you run the numbers to see how many "watt-equivalents" it takes to go 107mph (170+
    km/h), it's pretty clear that you're not going to make much difference adding a few hundred more.

    I think if I were going to try something like that it would be on a VERY sturdy bike.

    Mark Hickey Habanero Cycles habcycles.comhabcycles.com Home of the $695 ti frame

  8. Mark Hickey <[email hidden]> wrote in

    Quoted message said:

    I think if I were going to try something like that it would be on a VERY sturdy bike.

    As a newbie MTB'er who saw this clip, this is something that confused me. If all you were planning
    on doing was to go very fast, downhill, in a straight line, why would you use a stiff, lightweight
    bike that could fail catostrophically (as his did). Why not just use a very strong cro-mo bike?
    Seems like the extra weight might actually help you go faster. Hopefully it would bend instead of
    break, like his did.

  9. "Chris" <[email hidden]> wrote in message
    "]news:[email hidden]...

    Quoted message said:
    Quoted message said:

    If you folks have TBS (247 on directtv) put it on now...dude's trying to go 90 mph on his MTB.

    Chris

    Okay, it's over. Eric Barrone made it to 107 mph - then his head tube sheared off.

    Bummer.

  10. "Brett Jaffee" <[email hidden]> wrote in message
    "]news:[email hidden]...

    Quoted message said:

    Mark Hickey <[email hidden]> wrote in

    Quoted message said:

    I think if I were going to try something like that it would be on a VERY sturdy bike.

    As a newbie MTB'er who saw this clip, this is something that confused me. If all you were planning
    on doing was to go very fast, downhill, in a straight line, why would you use a stiff, lightweight
    bike that could fail catostrophically (as his did). Why not just use a very strong cro-mo


    bike?

    Quoted message said:

    Seems like the extra weight might actually help you go faster. Hopefully it would bend instead of
    break, like his did.

    Wind resistance I presume.

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.