My Torker DX post was waayyyyy too tall when I bought it.
I'm 5'11" and I hacksawed it a couple inches but I still can't find a picture perfect height. I've noticed that other unicycles seem lower, but I have fairly tall legs.
Any trick of finding the perfect trials post length?
i wrote this two seconds before finding your thread
uni_jim said:
you should use the wonderfull "search" button in the top right hand side of your screen. it depends entirely on your riding style and ability. Basically, don't hit your chest with your knees, but make sure you can still reach the pedals.
Long distance = high Freestyle = high trials in = low trials out = high flatland = low Muni = mid
**Shifty eyes** The unicycle on the ground, in a straight position, is just over my crotch. Maybe everyone else should be riding with their seat near their crotch?
-- Danni
leo said:
Without cocks you wouldn't even have a family forum.
If you wanna ride seat in trials you have it pretty low, if you wanna ride SIF (seat in front) trials you wanna have the seat, as Danni said, slightly above crotch level. Try and learn SIF trials first and if you don't like that style you can cut it down even lower to seat in trials.
If you wanna ride seat in trials you have it pretty low, if you wanna ride SIF (seat in front) trials you wanna have the seat, as Danni said, slightly above crotch level. Try and learn SIF trials first and if you don't like that style you can cut it down even lower to seat in trials.
Here is something you can try and it works... Measure your inseam and set the height of the seat to your actual inseam. Measure from the bottom of the crank to the middle of the seat, not the top. That would be an ideal position to ride long distance. If you don't feel comfortable, you sure have a good starting point.
For trials start lowering from this height until it feels confortable!
