Can anyone offer definitve advice on greasing a seatpost?
I have trawled the Web and have discovered there is conflicting advice. Some sites suggest white lithium based products, others clearly recommend non-lithium gease. I also recall reading something suggesting that lithium can spark a chemical reaction that actually causes a seat post to stick.
Clarity and any other recommendations are gratefully received?
Can anyone offer definitve advice on greasing a seatpost?
For situations where seizure is undesireable (eg. seatposts, quill stems/ quill->ahead adapters and bottom brackets) use copper grease. For everything else, use a good quality automotive or marine grease which may or may not be lithium based.
Simon -- Simon Ward, Accent Optical Technologies (UK) Ltd., York, YO31 8SD, UK "Perl is the ideal tool for the inspired slacker who'd rather sing and dance than spend longer than they need to at work ..." - perl.comhohoho.htmlOpen ↗
Can anyone offer definitve advice on greasing a seatpost?
For situations where seizure is undesireable (eg. seatposts, quill stems/ quill->ahead adapters and bottom brackets) use copper grease. For everything else, use a good quality automotive or marine grease which may or may not be lithium based.
Apart from that: removing said parts twice a year and regreasing them helps, too. In that case the actual kind of grease is not overly important IMHO.
Apart from that: removing said parts twice a year and regreasing them helps, too. In that case the actual kind of grease is not overly important IMHO.
There's a lot of truth in that.
-- Guy === I wonder if you wouldn't mind piecing out our imperfections with your thoughts; and while you're about it perhaps you could think when we talk of bicycles, that you see them printing their proud wheels i' the receiving earth; thanks awfully.
Can anyone offer definitve advice on greasing a seatpost?
I have trawled the Web and have discovered there is conflicting advice. Some sites suggest white lithium based products, others clearly recommend non-lithium gease. I also recall reading something suggesting that lithium can spark a chemical reaction that actually causes a seat post to stick.
Clarity and any other recommendations are gratefully received?
Thanks
Trealaw Boy
I've used lithium and non-lithium greases with equal success on seatposts. FWIW, Vaseline would probably work. <G>
"Trealaw Boy" <[email hidden]> wrote in message "]news:[email hidden]...
Quoted message said:
Can anyone offer definitve advice on greasing a seatpost?
I have trawled the Web and have discovered there is conflicting advice. Some sites suggest white lithium based products, others clearly recommend non-lithium gease. I also recall reading something suggesting that lithium can spark a chemical reaction that actually causes a seat post to stick.
Clarity and any other recommendations are gratefully received?
Thanks
Trealaw Boy
If you use lithium will that allow you to achieve warp speed ?....oh no, that's dilithium crystals innit?.... Any idea how to make dilithium crystals out of lithium grease ?...and how you might be able to utilise them in cycling to achieve warp speeds ?
Dave. (never greased a seatpost in me life, guv. Never suffered from a stuck one either for that matter...)
If you use lithium will that allow you to achieve warp speed ?....oh no, that's dilithium crystals innit?....
Remember Pons and Fleischmann and the great room temperature fusion debate back in the 80s? Their experiment used lithium electrodes which were often referred to as dilithium crystals :-)
Guy === ** WARNING ** This posting may contain traces of irony. chapmancentral.comchapmancentral.comOpen ↗ (BT ADSL and dynamic DNS permitting) NOTE: BT Openworld have now blocked port 25 (without notice), so old mail addresses may no longer work. Apologies.
"Just zis Guy, you know?" <[email hidden]> wrote in message "]news:[email hidden]...
Quoted message said:
Dave said:
If you use lithium will that allow you to achieve warp speed ?....oh no, that's dilithium crystals innit?....
Remember Pons and Fleischmann and the great room temperature fusion debate back in the 80s? Their experiment used lithium electrodes which were often referred to as dilithium crystals :-)
Can anyone offer definitve advice on greasing a seatpost?
I have trawled the Web and have discovered there is conflicting advice. Some sites suggest white lithium based products, others clearly recommend non-lithium gease. I also recall reading something suggesting that lithium can spark a chemical reaction that actually causes a seat post to stick.
Any grease at all will be fine. The object is to exclude water and oxygen and limit corrosion.
The comments about lithium based greases are BS and urban legend. Ignore them. There is no basis in fact for this contention. The lithium in lithium grease is bound up in an almost completely inert compound, and will not react with anything.
- ----------------------------------------------- Jim Adney [email hidden] Madison, WI 53711 USA -----------------------------------------------
Lithium Grease The term Lithium Grease can be slightly misleading as the lithium content is actually the thickener used to thicken the oil content to make it a grease as opposed to an oil. The formulation of a lithium grease includes a mineral or synthetic base oil, combined with a lithium thickener, and other additives, to suit special applications.
Lithium Grease The term Lithium Grease can be slightly misleading as the lithium content is actually the thickener used to thicken the oil content to make it a grease as opposed to an oil.
Hey I wonder if you could use engine oil and flour, sorta roll your own.
On Thu, 27 Feb 2003 21:08:06 -0000, "Clive George"
Quoted message said:
Quoted message said:
Remember Pons and Fleischmann and the great room temperature fusion debate back in the 80s? Their experiment used lithium electrodes which were often referred to as dilithium crystals :-)
Quoted message said:
Palladium wasn't it? (not as funny I know...)
According to my good friend Professor Higson, it was Lithium. He wrote the control system (on a BBC model B!). But we may, collectively, be misremembering.
Guy === ** WARNING ** This posting may contain traces of irony. chapmancentral.comchapmancentral.comOpen ↗ (BT ADSL and dynamic DNS permitting) NOTE: BT Openworld have now blocked port 25 (without notice), so old mail addresses may no longer work. Apologies.
On Thu, 27 Feb 2003 21:08:06 -0000, "Clive George"
Quoted message said:
Quoted message said:
Quoted message said:
Remember Pons and Fleischmann and the great room temperature fusion debate back in the 80s? Their experiment used lithium electrodes which were often referred to as dilithium crystals :-)
Quoted message said:
Palladium wasn't it? (not as funny I know...)
According to my good friend Professor Higson, it was Lithium. He wrote the control system (on a BBC model B!). But we may, collectively, be misremembering.
AIR, it was Palladium. There was a spike in the palladium price at around the time of the "discovery"
Lithium wouldn't be the best thing to use as electrode in water (heavy or not) anyway.
Tim.
-- God said, "div D = rho, div B = 0, curl E = - @B/@t, curl H = J + @D/@t," and there was light.
In rec.bicycles.tech Tim Woodall <[email hidden]> wrote: : AIR, it was Palladium. There was a spike in the palladium price at around the time of the : "discovery"
it was most definitely palladium. a palladium-deuterium system. i was a physics undergrad at the time and remember it fondly ;-)
try searching "DIY" in tech! nulltimate answers for indefinite amelioratives! on a hypor kinetic centripitol level off course. maybe another program? essence discovery?