General fitness, health and nutrition · Public discussion

seeking advice on best method for preparing "top round steak"

Started by Meg · · Last activity · 12 posts · 552 views

Thread navigation

Jump through the discussion

Go to the original post, the replies on this page, or the latest preserved contribution.

Thread details

What we know about this thread

Original section
General fitness, health and nutrition
Published
8 June 2006
Last activity
9 June 2006
Original author
Meg
Posts
12
Discussion status
Public discussion
Total views
552
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–12 of 12
Posts remain in their original chronological order.

Text size
  1. I just sucumbed to the low price on two nice looking pieces of top
    round steak each cut about 1.5" thick, very lean, with a moderate
    amount of fat trimming the edges. In the past I often asked the
    butcher to grind this cut because I do enjoy it as a hamburger or in a
    meatloaf. The butcher was no longer on duty so I decided to take the
    steaks home and cut it into cubes to be used in the preparation of beef
    stew.
    I am new to this group and I thought it would be fun to get some new
    ideas about how to prepare this cut of beef. I find it to be too tough
    a cut to either pan fry or broil but I am interested in what others
    have prepared with success.
    Thanks

  2. Meg said:

    I am new to this group and I thought it would be fun to get some new
    ideas about how to prepare this cut of beef. I find it to be too tough
    a cut to either pan fry or broil but I am interested in what others
    have prepared with success.
    Thanks

    I stab it about 30 times with my jacquard, and usually do either a
    teryaki/green onion or chipotle/orange marinade, then broil
    quickly. Then slice thinly at a steep angle.

    -sw

  3. In article <[email hidden]>,

    Meg said:

    I just sucumbed to the low price on two nice looking pieces of top
    round steak each cut about 1.5" thick, very lean, with a moderate
    amount of fat trimming the edges. In the past I often asked the
    butcher to grind this cut because I do enjoy it as a hamburger or in a
    meatloaf. The butcher was no longer on duty so I decided to take the
    steaks home and cut it into cubes to be used in the preparation of beef
    stew.
    I am new to this group and I thought it would be fun to get some new
    ideas about how to prepare this cut of beef. I find it to be too tough
    a cut to either pan fry or broil but I am interested in what others
    have prepared with success.
    Thanks

    Raw, Tartar.

    Seriously......

    I use only top or trimmed bottom round to make steak tartar.
    It's amazingly tender if uncooked.

    Otherwise, I'd use it to make pot roast. Long, slow cooking will also
    tenderize it. Crock pot or braise.
    --
    Peace!
    Om

    "My mother never saw the irony in calling me a Son of a [censored]"
    -- Jack Nicholson

  4. OmManiPadmeOmelet said:

    In article <[email hidden]>,

    Meg said:

    I just sucumbed to the low price on two nice looking pieces of top
    round steak each cut about 1.5" thick, very lean, with a moderate
    amount of fat trimming the edges. In the past I often asked the
    butcher to grind this cut because I do enjoy it as a hamburger or in a
    meatloaf. The butcher was no longer on duty so I decided to take the
    steaks home and cut it into cubes to be used in the preparation of beef
    stew.
    I am new to this group and I thought it would be fun to get some new
    ideas about how to prepare this cut of beef. I find it to be too tough
    a cut to either pan fry or broil but I am interested in what others
    have prepared with success.
    Thanks

    Raw, Tartar.

    Seriously......

    I use only top or trimmed bottom round to make steak tartar.
    It's amazingly tender if uncooked.

    Otherwise, I'd use it to make pot roast. Long, slow cooking will also
    tenderize it. Crock pot or braise.

    You can also use it for Swiss steak, or even tenderize the bejibbers
    out of it and make "chicken fried steak" with cream gravy. Long and
    slow cooking. You could do a Stroganoff type dish with it, too - brown
    the strips of meat, then cook until tender, then add the sour cream,
    mushrooms and other stuff.

    N.

  5. "Meg" <[email hidden]> wrote in message
    news:[email hidden]...

    Quoted message said:

    I just sucumbed to the low price on two nice looking pieces of top
    round steak each cut about 1.5" thick, very lean, with a moderate
    amount of fat trimming the edges. In the past I often asked the
    butcher to grind this cut because I do enjoy it as a hamburger or in a
    meatloaf. The butcher was no longer on duty so I decided to take the
    steaks home and cut it into cubes to be used in the preparation of beef
    stew.
    I am new to this group and I thought it would be fun to get some new
    ideas about how to prepare this cut of beef. I find it to be too tough
    a cut to either pan fry or broil but I am interested in what others
    have prepared with success.

    You can make chicken fried steak or any braised steak recipe with it.
    Sometimes I dump diced canned tomatoes, bell peppers and onions over it and
    bake until tender. Or I saute onions and mushrooms and add beef broth and
    bake until tender and then turn the juices into a nice sauce.

    Ms P

  6. Steve Wertz said:
    Meg said:

    I am new to this group and I thought it would be fun to get some new
    ideas about how to prepare this cut of beef. I find it to be too tough
    a cut to either pan fry or broil but I am interested in what others
    have prepared with success.
    Thanks

    I stab it about 30 times with my jacquard, and usually do either a
    teryaki/green onion or chipotle/orange marinade, then broil
    quickly. Then slice thinly at a steep angle.

    -sw

    Your marinade ideas sound very good, similar to ones I use on broiled
    salmon. How long do you marinate before broiling and at that level of
    physical tenderizing is it possible to get a nicely browned exterior
    and a rare to medium rare interior.
    The slice thinly at a steep angle is how I deal with a London broil and
    you are right it makes a huge difference.
    I am the carver in the household; and as I have chronic wrist and
    shoulder pain from making a living banging away at a computer keyboard
    I don't serve such labor intensive dishes. Besides I am happy to have
    had my turn with cutting up my children's food. Now that we are all
    grownup around here I prefer being able to just sit down and enjoy my
    meal without facing another task.
    My mother was the one who taught me how to carve. She also taught me
    the merits of squeezing some lemon juice on each side of a steak just 5
    or 10 minutes before broiling or grilling. She was a wonderful cook who
    prepared three meals a day because my Dad would come home for work for
    lunch. He passed in 1999 and my Mom took a break from all that cooking.
    She died at age 87 this past February. All this makes me miss her so.
    I appreciate all she taught me and have sweet memories of her delight
    with learning new ingredients and recipes from me.

  7. OmManiPadmeOmelet said:

    In article <[email hidden]>,

    Meg said:

    I just sucumbed to the low price on two nice looking pieces of top
    round steak each cut about 1.5" thick, very lean, with a moderate
    amount of fat trimming the edges. In the past I often asked the
    butcher to grind this cut because I do enjoy it as a hamburger or in a
    meatloaf. The butcher was no longer on duty so I decided to take the
    steaks home and cut it into cubes to be used in the preparation of beef
    stew.
    I am new to this group and I thought it would be fun to get some new
    ideas about how to prepare this cut of beef. I find it to be too tough
    a cut to either pan fry or broil but I am interested in what others
    have prepared with success.
    Thanks

    Raw, Tartar.

    Seriously......

    I use only top or trimmed bottom round to make steak tartar.
    It's amazingly tender if uncooked.

    Otherwise, I'd use it to make pot roast. Long, slow cooking will also
    tenderize it. Crock pot or braise.
    --
    Peace!
    Om

    "My mother never saw the irony in calling me a Son of a [censored]"
    -- Jack Nicholson

    I like your tag line a lot.
    I have never made steak tartar.. only snatched bits of freshly ground
    beef nailed it with some salt and popped it in my mouth while preparing
    burgers and such for others.
    Do you grind your cut of beef in a meat grinder or do you chop it by
    hand, or in a food processor. I know I have a hand crank meat grinder
    around here but I just can't seem to find it.
    How long and at what temp (300 perhaps) would you cook such a thin cut
    of beef to turn it into a pot roast. Do you cook it till it falls apart
    like pulled pork or can you carve it like pot roast?

  8. Meg said:

    I just sucumbed to the low price on two nice looking pieces of top
    round steak each cut about 1.5" thick, very lean, with a moderate
    amount of fat trimming the edges. In the past I often asked the
    butcher to grind this cut because I do enjoy it as a hamburger or in a
    meatloaf. The butcher was no longer on duty so I decided to take the
    steaks home and cut it into cubes to be used in the preparation of beef
    stew.
    I am new to this group and I thought it would be fun to get some new
    ideas about how to prepare this cut of beef. I find it to be too tough
    a cut to either pan fry or broil but I am interested in what others
    have prepared with success.
    Thanks

    Celebrate its toughness by making beef jerky.

    Best regards,
    Bob

  9. In article <[email hidden]>,

    Meg said:
    OmManiPadmeOmelet said:

    In article <[email hidden]>,

    Meg said:

    I just sucumbed to the low price on two nice looking pieces of top
    round steak each cut about 1.5" thick, very lean, with a moderate
    amount of fat trimming the edges. In the past I often asked the
    butcher to grind this cut because I do enjoy it as a hamburger or in a
    meatloaf. The butcher was no longer on duty so I decided to take the
    steaks home and cut it into cubes to be used in the preparation of beef
    stew.
    I am new to this group and I thought it would be fun to get some new
    ideas about how to prepare this cut of beef. I find it to be too tough
    a cut to either pan fry or broil but I am interested in what others
    have prepared with success.
    Thanks

    Raw, Tartar.

    Seriously......

    I use only top or trimmed bottom round to make steak tartar.
    It's amazingly tender if uncooked.

    Otherwise, I'd use it to make pot roast. Long, slow cooking will also
    tenderize it. Crock pot or braise.
    --
    Peace!
    Om

    "My mother never saw the irony in calling me a Son of a [censored]"
    -- Jack Nicholson

    I like your tag line a lot.
    I have never made steak tartar.. only snatched bits of freshly ground
    beef nailed it with some salt and popped it in my mouth while preparing
    burgers and such for others.

    We learned to do that when we were just little kids learning to cook. :-)
    I still do it.

    Quoted message said:

    Do you grind your cut of beef in a meat grinder or do you chop it by
    hand, or in a food processor.

    I slice mine by hand using a chinese cleaver as it holds an edge better
    than any knife in my drawer. I also keep the pieces fairly large as
    that's how I prefer it. Usually about 1/2" cubes.

    I'd post a pic but tinypic is down right now, but it's on the home page
    of the RFC website, the pic on the far right. :-)

    Quoted message said:

    I know I have a hand crank meat grinder
    around here but I just can't seem to find it.

    You really don't ned it... <g>

    Quoted message said:

    How long and at what temp (300 perhaps) would you cook such a thin cut
    of beef to turn it into a pot roast. Do you cook it till it falls apart
    like pulled pork or can you carve it like pot roast?

    With pot roast, I usually do a long, slow braise on medium-low heat on
    the stove top in a cast iron pot. I cook it until it falls apart along
    with the usual veggies and flavorings. :-)

    Usually an hour or so is long enough depending on the size of the roast.
    --
    Peace!
    Om

    "My mother never saw the irony in calling me a Son of a [censored]"
    -- Jack Nicholson

  10. "Meg" <[email hidden]> wrote in message
    news:[email hidden]...

    Quoted message said:

    I just sucumbed to the low price on two nice looking pieces of top
    round steak each cut about 1.5" thick, very lean, with a moderate
    amount of fat trimming the edges. In the past I often asked the
    butcher to grind this cut because I do enjoy it as a hamburger or in a
    meatloaf. The butcher was no longer on duty so I decided to take the
    steaks home and cut it into cubes to be used in the preparation of beef
    stew.
    I am new to this group and I thought it would be fun to get some new
    ideas about how to prepare this cut of beef. I find it to be too tough
    a cut to either pan fry or broil but I am interested in what others
    have prepared with success.
    Thanks

    Round steak is great for long slow methods of cooking since it has great flavor, but
    little fat to tenderize it. Try this:
    lightly dredge the steaks in seasoned flour (salt, pepper, whatever else sounds good
    to you). Brown on both sides in a mixture of butter and olive oil (1-2 Tbsp each,
    depending on the number of steaks). Add beef stock to about 3/4 of the way up the
    sides of the steaks and put a lid on. Reduce heat to med-low and simmer until the
    meat is fork tender. It takes some time, and you may have to use the low setting
    depending on your stove/cooktop. Taste for seasoning, I always end up adding more
    pepper. The sauce thickens on it's own, and it's a tasty and not very labor intensive
    dinner when paired with some yukon golds and green beans.

    kimberly

  11. Meg said:

    I am new to this group and I thought it would be fun to get some new
    ideas about how to prepare this cut of beef. I find it to be too tough
    a cut to either pan fry or broil but I am interested in what others
    have prepared with success.
    Thanks

    Chili (which is basically beef stew with chili gravy).

    Fajitas.

    Chopped and mixed into browned mushrooms and caramelized onions to go
    with scrambled eggs.

    Pounded senseless for chicken-fried steak.

    --Blair

  12. Blair P. Houghton said:


    Meg said:

    I am new to this group and I thought it would be fun to get some new
    ideas about how to prepare this cut of beef.

    Chili (which is basically beef stew with chili gravy).

    Fajitas.

    Chopped and mixed into browned mushrooms and caramelized onions to go
    with scrambled eggs.

    Pounded senseless for chicken-fried steak.

    Swiss Steak

    Christine

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.