Shimano 105 wheel question

http://cycle.shimano-eu.com/catalog/cycle/products/component.jsp?PRODUCT%3C%3Eprd_id=845524441774751&FOLDER%3C%3Efolder_id=2534374302039406&ASSORTMENT%3C%3East_id=1408474395181175&bmUID=1199878153044
There are exploded views in the Technical docs that might answer your question

Albert 50 said:

cycle.shimano-eu.comcomponent.jspOpen ↗
There are exploded views in the Technical docs that might answer your question

Thanks but the technical documents don't provide the spoke witdth and depth.

I didn't actually down load the diagrams. I would have thought the info you wanted would be there 🙂
Are you going to respoke?

biker jk said:

Could anybody tell me the dimensions of the spokes on the Shimano 105 (WH-5600) wheels, specifically the width and depth of the spokes (eg. 2.2mm x 1.1mm). I don't have a set of vernier calipers and using a ruler isn't very accurate. Any help would be very appreciated.

I have Shimano WH-R550 wheels at home, when I get home I can check them for you, (I also have Dial Calipers) I would think they are the same spokes as yours. I will post later tonight, not sure what your time will be where your at🙂

Replacement Spoke Kits are available from Shimano for all of their recent wheels. 😉

See the PDF for part number.

Fujiman said:

I have Shimano WH-R550 wheels at home, when I get home I can check them for you, (I also have Dial Calipers) I would think they are the same spokes as yours. I will post later tonight, not sure what your time will be where your at🙂

That would be most appreciated.

biker jk said:

That would be most appreciated.

I come up with .060" (1.524mm) thick, X .100" (2.54mm) wide.

Hope this helps, sorry about forgetting to post the size.