Australia and New Zealand · Public discussion

Shimano/Campag compatibility....

Started by Bluenose · · Last activity · 7 posts · 679 views

← Back to Australia and New Zealand

Thread navigation

Jump through the discussion

Go to the original post, the replies on this page, or the latest preserved contribution.

01 / Original postShimano/Campag compatibility....Bluenose · 7 May 2004 02 / This pagePosts 1–7Page 1 of 1 · chronological order 03 / Latest replyPost #7Jack Russell · 7 May 2004

Thread details

What we know about this thread

Original section
Australia and New Zealand
Published
7 May 2004
Last activity
7 May 2004
Original author
Bluenose
Posts
7
Discussion status
Public discussion
Total views
679
Views / 30 days
0
Topics
Drivetrain compatibilityFront derailleurs

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–7 of 7
Posts remain in their original chronological order.

Text size
  1. Original post
    Bluenose
    Archived post
    #1

    Hi there,

    I'm looking for some help and opinions on a dilemma I'm facing.

    I have a OCR2 with a Tiagra triple group set. I'm looking at upgrading
    and have recently bought a Ultegra triple crankset. My next purchases
    were going to be a Dura Ace triple RD, a Ultegra triple FD and a set of
    Ultegra shifters. I've done some reading of reviews and which have not
    painted the Ultegra shifters in a very good light ie multiple failures,
    rattling etc.

    I know you can mix Campag. with Shimano components but I'm a new kid on
    the bloke in regards to cycling and I'm not entirely sure of the
    combo's.

    I have some questions below and would appreciate your expertise.

    If I were to purchase Campag. shifters then will they work with my
    Ultegra triple cranks, cassette, and current Tiagra triple FD? If so
    then in order for them to work I must buy a Triple/long cage Campag. RD?
    Will my Ultegra chain need replacing with a Campag. chain? Do I have buy
    9 speed Campag shifters and RD or can I buy a 10 speed? Finally, what's
    the honest opinion regarding mixing Shimano/Campag. Is it more hassle
    than it's worth? Will the different components work together smoothly or
    will they require constant adjustments and fiddling around?

    I look forward to your help or opinions on this topic and I apologise if
    it's all been discussed before but as I've mentioned earlier I'm fairly
    new to all of this.

    Many thanks in advance

    Report
  2. flyingdutch
    Archived post
    #2

    more hassle than its worth (and Im biased towards the 'italian'😉. Sta
    with the Sushi

    you can use campy ergos with Shimano RDs. just turning the clamping mec
    on it 90degree holds the cable in just the right plac

    there's a relevant thread on cyclingplus.co.uk that will interes
    you, perhap

    youre biggest issues are differing cable-pull and cassette-gaps
    distance

    the longcage may not be necessary (and is only a couple o
    differing/interchangeable parts on campag) as long as you stay away fro
    the small-small and big-big combos (but you knew that, right?

    All other biases aside, mixing bits on Shimano is a head-ache even i
    2004 whereas post 2001 campag you can mix-match almost anything (and AL
    ergos operate both double/triple front mechs!

    -

    Report
  3. hippy
    Archived post
    #3
    Quoted message said:

    Originally posted by suzyj I like the SRAM ones, as they >come with
    powerlink thingy that makes removal easy

    How do you actually remove these? I looked at one once and tried to po
    it open - no luck. Out came the chain breaker..

    Any hints

    hipp

    -

    Report
  4. hippy
    Archived post
    #4
    Quoted message said:

    Originally posted by suzyj There's a bit of a knack to it. You grab th
    chain either side of >the powerlink and push the powerlink in o
    itself. Some WD40 >or similar helps if it's particularly grimy. Th
    trick is to work out >which side of the chain moves which way, an
    apply pressure >appropriately, while not allowing the pivots to rotate

    I remembered how it went together so did try to squeeze it together
    Guess it's just one of those things where you need to have the 'knack'
    I'll try again one day.. unless the breaker is handy <cue evil laug
    sfx> bwahahahahaha! ;

    cheers! hipp

    -

    Report
  5. suzyj
    Archived post
    #5
    hippy said:

    How do you actually remove these? I looked at one once and tried t
    pop it open - no luck. Out came the chain breaker..

    Quoted message said:

    Any hints

    There's a bit of a knack to it. You grab the chain either side of th
    powerlink and push the powerlink in on itself. Some WD40 or simila
    helps if it's particularly grimy. The trick is to work out which side o
    the chain moves which way, and apply pressure appropriately, while no
    allowing the pivots to rotate

    One of those things where a quick demo is worth pages of explanation

    Regards

    Suz

    -

    Report
  6. flyingdutch
    Archived post
    #6
    hippy said:
    Quoted message said:

    Originally posted by suzyj I like the SRAM ones, as they >come with a
    powerlink thingy that makes removal easy.


    How do you actually remove these? I looked at one once and tried to pop
    it open - no luck. Out came the chain breaker...
    Any hints?
    hippy

    not sure if they are the same as the Connex ones for campag chains bu
    you just push the links together (along chainline direction) which give
    you some slack and allows you to twist them apart. easy pease
    japanesey

    JJ

    -

    Report
  7. Jack Russell
    Archived post
    #7

    I find it helps to clean the gunk off the link then you push it together
    but with a bit of a sideways motion. Before doing all that take the
    chain off the cogs at both ends so it does not have any tension on it.

    hippy said:
    Quoted message said:

    Originally posted by suzyj I like the SRAM ones, as they >come with a
    powerlink thingy that makes removal easy.

    How do you actually remove these? I looked at one once and tried to pop
    it open - no luck. Out came the chain breaker...

    Any hints?

    hippy

    --

    --
    Remove norubbish to reply direct

    Jack Russell

    Report

Keep exploring

Browse the sectionAustralia and New Zealand Return to CyclingForumsStart at the home page Search discussionsFind another thread

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.