Some help with parts

I'm pretty sure all thoes components will work, you might
need a bigger Nimbus/Yuni frame, probably around a 26" to be
able to fit the tire. You will also need a KH hub to go
along with the KH cranks:-) The snafu pedals will fit the
cranks. -Sabin

--
sabin_a. - close to expert

"Is it possible to microwave a burrito so hot that god himself could not
eat it?"

'SIXSIXONE' (www.sixsixone.com)

------------------------------------------------------------------------
sabin_a.'s Profile: unicyclist.com4457Open ↗
View this thread: unicyclist.com32241Open ↗

I've got the Snafu's- most pedals should fit fine on the KH
cranks- these specs are pretty standard. I would look at
getting some shorter 140mm cranks though as well- makes your
MUni more versatile.

Don't know much about the rim or tyre- but I've got a YUni
frame on my 29er which works great. Thing to be aware is
that with the Nimbus/Nimbus II/YUni frames- I can't
remember which is which now, but one of them has ovalised
tubes the whole way (good), one of them has round tubes
which are crimped to oval at the bottom, but splay out
back into round tubes at the top (not so good). This gives
it a wider profile which rubs on your legs. I've got a
friend who has that frame (I think it's a Nimbus) which
constantly gets banged against his shin- and worn a hole
through his 661 pads.

--
GizmoDuck - Adventure unicyclist

o-kO

------------------------------------------------------------------------
GizmoDuck's Profile: unicyclist.com794Open ↗
View this thread: unicyclist.com32241Open ↗

Your new setup seems like a bit overkill. For your money, I
think its better to go straight for a KH24. I know they are
out of stock, but I think it's worth the wait.

Another option is to get the Nimbus, Fireball, and Snafu
pedals and hold off on the new rim and hub. You say that you
are new to uniing, so I doubt you are going to break any of
that soon. The cranks are the one part you might break. But
cranks are cheap. At the end of a couple month evaluation
period, you can upgrade the cycle with the KH wheel set when
they come back in stock.

The rim that comes with the Nimbus is a good one, and the
hub is decent. I think it's a good idea to keep that intact
and building up the KH separately. Then you can have one
wheel for MUni and one wheel with the fireball.

What type of riding are you planning to do anyway?

Hope that helps, Daniel

--
daino149 - How's it going, Texas?

there ain't enough body armor in the country for me to try that. -- Ken
on the mtbr forum in reference to MUni
------------------------------------------------------------------------
daino149's Profile: unicyclist.com933Open ↗
View this thread: unicyclist.com32241Open ↗

it's usually a good idea to use 127mm or 152mm cranks on a nimbus, i
should know, i own a nimbus 'these are good'
(unicycle.comshopexd.aspOpen ↗)

--
die-hard uni - 24-inch CRUISIN'
------------------------------------------------------------------------
die-hard uni's Profile: unicyclist.com6457Open ↗
View this thread: unicyclist.com32241Open ↗

Quoted message said:

What type of riding are you planning to do anyway

Well, my friend has a uni that's a lot like the one I want
to build, and I really liked it. It was so comfortable and
easy to ride (for some reason I'm better on larger
unicycles) that I want something like it with a bit of
modifications. The type of riding I plan on doing its off
road and on, hence the fireball tire. I found that it gave
good traction on and off road.

--
digitalattrition
------------------------------------------------------------------------
digitalattrition's Profile: unicyclist.com6430Open ↗
View this thread: unicyclist.com32241Open ↗