Tech rails

bluntslides... jump over the rail and grind on your blind pedal... or
come up to it blind and grind on your normal pedal.

--
tomsey

-those f**king clowns are gunna die-
------------------------------------------------------------------------
tomsey's Profile: http://www.unicyclist.com/profile/7038
View this thread: http://www.unicyclist.com/thread/43975

yeah done that to all the tricks out...

--
maxisback
------------------------------------------------------------------------
maxisback's Profile: http://www.unicyclist.com/profile/10885
View this thread: http://www.unicyclist.com/thread/43975

I cant do anything on a rail other than a normal grind but i think if
the rail is high enough a seat whip would be cool. Maybe a crankflip
into one, i havent seen that yet.

--
litldude2

Gallery.unicyclist.com/spencer
________________
LitlDude2: you suck
Byrnetown: yea
________________
beware of the evan!
------------------------------------------------------------------------
litldude2's Profile: http://www.unicyclist.com/profile/6134
View this thread: http://www.unicyclist.com/thread/43975

We just had this conversation. haha. That's rad. Crankflip into a rail
would be sick. Tomsey I didn't know that you could blind slide rails.
Let alone blunt to blind. Crazy. I guess another thing one could add is
backslide rails. That's all I can say. ha, laters

-Shaun Johanneson

--
unifreak7

Now starting to get good!
------------------------------------------------------------------------
unifreak7's Profile: http://www.unicyclist.com/profile/6137
View this thread: http://www.unicyclist.com/thread/43975

dude, so are you saying you can blunt and trick out, on a rail?

yeah, i havent done it on any handrails, just park rails... but i dont
think its too far away. blind blunts are kinda easier to get over the
rail but harder to stay on.
another cool one would be alley-oop backslide. i cant do them even on
ledges, but its there to try. if tricking out of bluntslides doesnt
pose enough of a challenge for ya

--
tomsey

-those f**king clowns are gunna die-
------------------------------------------------------------------------
tomsey's Profile: http://www.unicyclist.com/profile/7038
View this thread: http://www.unicyclist.com/thread/43975

I would just like to say that I do not understand a word you guys are
saying.

But I AM curious.

--
flyer
------------------------------------------------------------------------
flyer's Profile: http://www.unicyclist.com/profile/9894
View this thread: http://www.unicyclist.com/thread/43975

flyer said:

I would just like to say that I do not understand a word you guys are
saying.

But I AM curious.

lots of skater terms have been appropriated into street. you really
need to see them to know how these tricks are done... and to know whats
still possible.

--
tomsey

-those f**king clowns are gunna die-
------------------------------------------------------------------------
tomsey's Profile: http://www.unicyclist.com/profile/7038
View this thread: http://www.unicyclist.com/thread/43975

Yo,
Agreeable that it kinda has to be seen to understand...

Quote "dude, so are you saying you can blunt and trick out, on a
rail?"

Nah, I'm more of a tech ledge grinder, that just got into tech rails.
(If this question is posed at me, i'm not sure, i'm answering it
anyway, lol) I've blunt slide a park rail, haven't found street rails
yet, they're all too high to pop over to slide. BluntBlind would be
easier to jump over to slide, but i agree harder to slide. This I
haven't done on a ledge yet. Allie oop backslide. I'm guess blunt to
backslide. That'd be sick, never tried that either. I'm looking for
some killer one foots in backslides, and 180 flips to backslides.
That's what I want next. More backslide stuff, kinda young. Laters

-Shaun Johanneson

--
unifreak7

Now starting to get good!
------------------------------------------------------------------------
unifreak7's Profile: http://www.unicyclist.com/profile/6137
View this thread: http://www.unicyclist.com/thread/43975

Are you guys talking about handrails like down stairs or rails that
aren't down stairs that are just flat? If your talking about actual
hand rails i've almost landed; 180 out, full rev out, tire grab out,
and levitator. If you're talking about flat rails i've done eveything
on those that i can do on leges.

--
General Dibbles

Nemesis Clothing Co.
www.nemesisclothingco.com
------------------------------------------------------------------------
General Dibbles's Profile: http://www.unicyclist.com/profile/8108
View this thread: http://www.unicyclist.com/thread/43975

OK, i've been thinking bout this for a while, any chance of this
working?

Ride up, jump to grind on your good side, let's say the rail is on your
right. Basically the trick is to turn around while grinding, so you end
up going backwards. As you're going along, you jam the front of your
tyre in to the rail and bring the back round to the left. As the back
swings out your grinding crank will come off the rail so you're going
to need to put a little hop or something in, cos for a very short time
you won't be resting on anything. Keep rotating until your left crank
catches on the rail and you end up once again parallel to the rail, but
now facing backwards, and you grind out backwards so your direction
never changes. Does that make sense?

--
kington99

Dave

- what a thoroughly post-modern subversion of the cycling genre -
------------------------------------------------------------------------
kington99's Profile: http://www.unicyclist.com/profile/9417
View this thread: http://www.unicyclist.com/thread/43975

i can blunt to 180out actaully thats it.. never rlly tried bluunt to
blind.. I will soon tho

--
maxisback
------------------------------------------------------------------------
maxisback's Profile: http://www.unicyclist.com/profile/10885
View this thread: http://www.unicyclist.com/thread/43975

and I do all my grind on a flat squared rail thats a bit lower the 1f
high... itsd my practice rail

--
maxisback
------------------------------------------------------------------------
maxisback's Profile: http://www.unicyclist.com/profile/10885
View this thread: http://www.unicyclist.com/thread/43975

might bemore then 1 foot then.. my tire is just above the ground and at
the end of the rail I hit the thing that makes the rail stay up.. and
actaully I think its exactly 1 foot and my tire dosent touch the ground

--
maxisback
------------------------------------------------------------------------
maxisback's Profile: http://www.unicyclist.com/profile/10885
View this thread: http://www.unicyclist.com/thread/43975

and I ahve to say that my 180 into rials r really bad and I cannot
crankflip to rail or unispin out of them...

--
maxisback
------------------------------------------------------------------------
maxisback's Profile: http://www.unicyclist.com/profile/10885
View this thread: http://www.unicyclist.com/thread/43975

litldude2 said:

I have a rail thats 12" high and when i grind it, i have to do a rev in
the air so my tire doesnt touch the ground. How can you grind a rail
thats less than 1 foot? thats almost even with your crank.

dude, just go to a skate shop. they usually have one in stock, if they
donnt most shops have catalogs or something like that that you can
order, or just go on ebay.
or you couldd just get a 2X4 peice of wood and bolt in on the legs of
the rail. that what i did, it works fine unless you maid it too high

Riley

--
manon1wheel

getting better... lvl 7 unicyclist

---10 steps to success
1.try
2.try again
3.try once more
4.do research
5.ask someone that has already done it
6.never stop trying
7.try again

-.- T1me to overthrow most replies!!-.-
------------------------------------------------------------------------
manon1wheel's Profile: http://www.unicyclist.com/profile/9972
View this thread: http://www.unicyclist.com/thread/43975

i use my freind metal rail he made in construction

--
maxisback
------------------------------------------------------------------------
maxisback's Profile: http://www.unicyclist.com/profile/10885
View this thread: http://www.unicyclist.com/thread/43975

Wait....whats an 'alley oop'?

--
forrestunifreak

warning: the above statement is usually not intended to offend anyone.
it has been know to cause warts, ringworm, and diaper rash.
it may contain logic, poltical incorrectyness, pshycological nudity,
and traces of peanuts.
'My gallery[UPDATED: 10/12/05] ' (http://tinyurl.com/bbf9x)
------------------------------------------------------------------------
forrestunifreak's Profile: http://www.unicyclist.com/profile/6828
View this thread: http://www.unicyclist.com/thread/43975

very hard to explain.. the only way I could say it would be a 180 on the
wrong side😕

--
maxisback
------------------------------------------------------------------------
maxisback's Profile: http://www.unicyclist.com/profile/10885
View this thread: http://www.unicyclist.com/thread/43975

forrestunifreak said:

Wait....whats an 'alley oop'?

jump to the left side, while pivoting clockwise. or vise versa.

--
onetrack

"People over here have a dangerous habit of adding quotes to signature
lines."
-Klaas Bil
------------------------------------------------------------------------
onetrack's Profile: http://www.unicyclist.com/profile/6374
View this thread: http://www.unicyclist.com/thread/43975