Can somebody tell me what the "standard" water bottle holders thread
size/tpi is ? I'd like to purchase a tap to refresh the threading
on my newly painted frame.
TIA
Phil
Cycling Equipment · Public discussion
Thread Size(s)
Thread navigation
Jump through the discussion
Go to the original post, the replies on this page, or the latest preserved contribution.
Thread details
What we know about this thread
- Original section
- Cycling Equipment
- Published
- 22 August 2004
- Last activity
- 24 August 2004
- Original author
- Phil B.
- Posts
- 7
- Discussion status
- Public discussion
- Total views
- 538
- Views / 30 days
- 0
- Topics
The navigation and discussion metadata provide context. Posts remain in their original chronological order.
-
-
Phil B. said:
Can somebody tell me what the "standard" water bottle holders thread
size/tpi is ? I'd like to purchase a tap to refresh the threading
on my newly painted frame.M5
-
Zog The Undeniable <[email hidden]> wrote in message news:<4128d7d3.0@entanet>...
Quoted message said:
Phil B. said:
Can somebody tell me what the "standard" water bottle holders thread
size/tpi is ? I'd like to purchase a tap to refresh the threading
on my newly painted frame.M5
More precisely, 5mm diameter x 0.8mm pitch.
Jeff
-
(Jeff Wills) said:
Zog The Undeniable <[email hidden]> wrote in message news:<4128d7d3.0@entanet>...
Quoted message said:
Phil B. said:
Can somebody tell me what the "standard" water bottle holders thread
size/tpi is ? I'd like to purchase a tap to refresh the threading
on my newly painted frame.M5
More precisely, 5mm diameter x 0.8mm pitch.
And if all you need to do is chase paint from the threads, take a
bolt, cut a slot two or three threads deep in the tip of it with a
Dremel, and use that.--
Typoes are a feature, not a bug.
Some gardening required to reply via email.
Words processed in a facility that contains nuts. -
Jeff Wills said:
More precisely, 5mm diameter x 0.8mm pitch.
<pedant> M5 is always taken to be the coarse thread, 5mm x 0.8mm as you
correctly state. The other 5mm thread is called "M5 fine" </pedant> -
On Sun, 22 Aug 2004 15:48:04 GMT Phil B. <[email hidden]>
Quoted message said:
Can somebody tell me what the "standard" water bottle holders thread
size/tpi is ? I'd like to purchase a tap to refresh the threading
on my newly painted frame.M5 x 0.8
-
-----------------------------------------------
Jim Adney [email hidden]
Madison, WI 53711 USA
----------------------------------------------- -
Zog The Undeniable <[email hidden]> wrote in message news:<412a2a91.0@entanet>...
Quoted message said:
Jeff Wills said:
More precisely, 5mm diameter x 0.8mm pitch.
<pedant> M5 is always taken to be the coarse thread, 5mm x 0.8mm as you
correctly state. The other 5mm thread is called "M5 fine" </pedant><sarcasm> Well, FINE! </sarcasm> :-P
Jeff
Active in the last 60 minutes
Active in this thread
0 users · 0 guests ·0 bots ·0 total
No signed-in users are active right now.
No known search crawlers active right now.